Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
References: <20221022162742.21671-1-aidanmacdonald.0x0@gmail.com>
 <20221022162742.21671-2-aidanmacdonald.0x0@gmail.com>
 <ef6a326b-5c61-988b-2ec2-cd8e233e5d28@linaro.org>
 <GMvEU8xVTkjIoQ518XWAaLkhldSZHlk7@localhost>
 <4ef59d94-d045-55fc-d531-c84e7edb8333@linaro.org>
 <hXRpArckbrXUelDdaJ3Y2SErmKiuycXt@localhost>
 <66c1a100-922e-4a33-e80c-fc80866acf03@linaro.org>
 <jZCUALhj8PoqVkuWdtLf8LnPAj1wDakF@localhost>
 <38205667-d36f-e7a9-21b0-2e8597a662ff@linaro.org>
From:   Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc:     broonie@kernel.org, lgirdwood@gmail.com, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org,
        kuninori.morimoto.gx@renesas.com, perex@perex.cz, tiwai@suse.com,
        alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 2/2] dt-bindings: ASoC: simple-card: Add
 system-clock-id property
In-reply-to: <38205667-d36f-e7a9-21b0-2e8597a662ff@linaro.org>
Date:   Wed, 26 Oct 2022 15:48:21 +0100
Message-ID: <qNdQQJRLFWJ6gNfwM73oJ8EH56Y5nWgd@localhost>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk


Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> writes:

> And the remaining piece I don't get is that these are not bindings for
> codec, but for sound audio card. You want to set "system-clock-id"
> property for audio card, while putting clock from codec, which will be
> used to pass back to the codec... so it is a property of the codec, not
> of the audio card. IOW, NAU8821_CLK_* does not configure here the clock
> of the system, but only, only clock of the codec.

The system clock is controlled at the DAI level, it's specific to one
DAI on one component. The simple-card device node has sub-nodes for the
DAI links, and each DAI link node has sub-nodes for the DAIs within the
link. "system-clock-id" is a property on the DAI nodes, so it's not a
card-level property, just one part of the overall card definition.

Since the clock ID is something defined by the codec it would naturally
be a value defined by the codec, but the *configuration* of the codec is
part of the sound card because it depends on how everything is connected
together. If you used the same codec in a different machine it would
have a different configuration.

Regards,
Aidan