Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Horatiu Vultur <horatiu.vultur@microchip.com>
To:     <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
CC:     <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <claudiu.beznea@microchip.com>, <nicolas.ferre@microchip.com>,
        <UNGLinuxDriver@microchip.com>,
        Horatiu Vultur <horatiu.vultur@microchip.com>
Subject: [PATCH v2] ARM: dts: lan966x: Enable sgpio on pcb8291
Date:   Wed, 26 Oct 2022 19:43:03 +0200
Message-ID: <20221026174303.702919-1-horatiu.vultur@microchip.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Enable sgpio node on pcb8291 as this is needed to be able to control
the LEDs on this board. Otherwise the LEDs support on the board will
not be available.
On the other board pcb8309 the sgpio is already enabled because it
needed to access the SFP ports.

Fixes: 0b7baa1a307f ("ARM: dts: lan966x: add led configuration")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>

---
v1->v2:
- add fixes tag
---
 arch/arm/boot/dts/lan966x-pcb8291.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts
index f4f054cdf2a87..3a3d76af86122 100644
--- a/arch/arm/boot/dts/lan966x-pcb8291.dts
+++ b/arch/arm/boot/dts/lan966x-pcb8291.dts
@@ -69,6 +69,12 @@ can0_b_pins:  can0-b-pins {
 		pins = "GPIO_35", "GPIO_36";
 		function = "can0_b";
 	};
+
+	sgpio_a_pins: sgpio-a-pins {
+		/* SCK, D0, D1, LD */
+		pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35";
+		function = "sgpio_a";
+	};
 };
 
 &can0 {
@@ -118,6 +124,20 @@ &serdes {
 	status = "okay";
 };
 
+&sgpio {
+	pinctrl-0 = <&sgpio_a_pins>;
+	pinctrl-names = "default";
+	microchip,sgpio-port-ranges = <0 3>, <8 11>;
+	status = "okay";
+
+	gpio@0 {
+		ngpios = <64>;
+	};
+	gpio@1 {
+		ngpios = <64>;
+	};
+};
+
 &switch {
 	status = "okay";
 };
-- 
2.38.0