Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 27 Oct 2022 19:25:10 +0530
From:   Pavan Kondeti <quic_pkondeti@quicinc.com>
To:     Elliot Berman <quic_eberman@quicinc.com>
CC:     Bjorn Andersson <quic_bjorande@quicinc.com>,
        Jassi Brar <jassisinghbrar@gmail.com>,
        Murali Nalajala <quic_mnalajal@quicinc.com>,
        Trilok Soni <quic_tsoni@quicinc.com>,
        Srivatsa Vaddagiri <quic_svaddagi@quicinc.com>,
        Carl van Schaik <quic_cvanscha@quicinc.com>,
        Prakruthi Deepak Heragu <quic_pheragu@quicinc.com>,
        Andy Gross <agross@kernel.org>,
        Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
        <linux-arm-kernel@lists.infradead.org>,
        Mark Rutland <mark.rutland@arm.com>,
        Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
        Sudeep Holla <sudeep.holla@arm.com>,
        Marc Zyngier <maz@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Jonathan Corbet <corbet@lwn.net>,
        "Will Deacon" <will@kernel.org>,
        Catalin Marinas <catalin.marinas@arm.com>,
        "Arnd Bergmann" <arnd@arndb.de>,
        Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
        Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
        Amol Maheshwari <amahesh@qti.qualcomm.com>,
        Kalle Valo <kvalo@kernel.org>, <devicetree@vger.kernel.org>,
        <linux-doc@vger.kernel.org>, <linux-arm-msm@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v6 09/21] mailbox: Add Gunyah message queue mailbox
Message-ID: <20221027135510.GA29032@hu-pkondeti-hyd.qualcomm.com>
References: <20221026185846.3983888-1-quic_eberman@quicinc.com>
 <20221026185846.3983888-10-quic_eberman@quicinc.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Disposition: inline
In-Reply-To: <20221026185846.3983888-10-quic_eberman@quicinc.com>
User-Agent: Mutt/1.5.24 (2015-08-30)
Precedence: bulk

Hi Elliot,

On Wed, Oct 26, 2022 at 11:58:34AM -0700, Elliot Berman wrote:
> Gunyah message queues are a unidirectional inter-VM pipe for messages up
> to 1024 bytes. This driver supports pairing a receiver message queue and
> a transmitter message queue to expose a single mailbox channel.
> 
> Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>

<snip>

> +static irqreturn_t gh_msgq_tx_irq_handler(int irq, void *data)
> +{
> +	struct gh_msgq *msgq = data;
> +
> +	mbox_chan_txdone(gh_msgq_chan(msgq), 0);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static void gh_msgq_txdone_tasklet(unsigned long data)
> +{
> +	struct gh_msgq *msgq = (struct gh_msgq *)data;
> +
> +	mbox_chan_txdone(gh_msgq_chan(msgq), msgq->last_status);
> +}
> +
> +static int gh_msgq_send_data(struct mbox_chan *chan, void *data)
> +{
> +	struct gh_msgq *msgq = mbox_chan_to_msgq(chan);
> +	struct gh_msgq_tx_data *msgq_data = data;
> +	u64 tx_flags = 0;
> +	unsigned long ret;
> +	bool ready;
> +
> +	if (msgq_data->push)
> +		tx_flags |= GH_HYPERCALL_MSGQ_TX_FLAGS_PUSH;
> +
> +	ret = gh_hypercall_msgq_send(msgq->tx_ghrsc->capid, msgq_data->length,
> +					(uintptr_t)msgq_data->data, tx_flags, &ready);
> +
> +	/**
> +	 * unlikely because Linux tracks state of msgq and should not try to
> +	 * send message when msgq is full.
> +	 */
> +	if (unlikely(ret == GH_ERROR_MSGQUEUE_FULL))
> +		return -EAGAIN;
> +
> +	/**
> +	 * Propagate all other errors to client. If we return error to mailbox
> +	 * framework, then no other messages can be sent and nobody will know
> +	 * to retry this message.
> +	 */
> +	msgq->last_status = gh_remap_error(ret);
> +
> +	/**
> +	 * This message was successfully sent, but message queue isn't ready to
> +	 * receive more messages because it's now full. Mailbox framework
> +	 * requires that we only report that message was transmitted only when
> +	 * we're ready to transmit another message. We'll get that in the form
> +	 * of tx IRQ once the other side starts to drain the msgq.
> +	 */
> +	if (ret == GH_ERROR_OK && !ready)
> +		return 0;
> +
> +	/**
> +	 * We can send more messages. Mailbox framework requires that tx done
> +	 * happens asynchronously to sending the message. Gunyah message queues
> +	 * tell us right away on the hypercall return whether we can send more
> +	 * messages. To work around this, defer the txdone to a tasklet.
> +	 */
> +	tasklet_schedule(&msgq->txdone_tasklet);
> +

Nice comments.

irq_work would be a better choice.

> +	return 0;
> +}
> +
> +struct mbox_chan_ops gh_msgq_ops = {
> +	.send_data = gh_msgq_send_data,
> +};
> +
> +/**
> + * gh_msgq_init() - Initialize a Gunyah message queue with an mbox_client
> + * @parent: optional, device parent used for the mailbox controller
> + * @msgq: Pointer to the gh_msgq to initialize
> + * @cl: A mailbox client to bind to the mailbox channel that the message queue creates
> + * @tx_ghrsc: optional, the transmission side of the message queue
> + * @rx_ghrsc: optional, the receiving side of the message queue
> + *
> + * At least one of tx_ghrsc and rx_ghrsc should be not NULL. Most message queue use cases come with
> + * a pair of message queues to facilitiate bidirectional communication. When tx_ghrsc is set,
> + * the client can send messages with mbox_send_message(gh_msgq_chan(msgq), msg). When rx_ghrsc
> + * is set, the mbox_client should register an .rx_callback() and the message queue driver will
> + * push all available messages upon receiving the RX ready interrupt. The messages should be
> + * consumed or copied by the client right away as the gh_msgq_rx_data will be replaced/destroyed
> + * after the callback.
> + *
> + * Returns - 0 on success, negative otherwise
> + */
> +int gh_msgq_init(struct device *parent, struct gh_msgq *msgq, struct mbox_client *cl,
> +		     struct gunyah_resource *tx_ghrsc, struct gunyah_resource *rx_ghrsc)
> +{
> +	int ret;
> +
> +	/* Must have at least a tx_ghrsc or rx_ghrsc and that they are the right device types */
> +	if ((!tx_ghrsc && !rx_ghrsc) ||
> +	    (tx_ghrsc && tx_ghrsc->type != GUNYAH_RESOURCE_TYPE_MSGQ_TX) ||
> +	    (rx_ghrsc && rx_ghrsc->type != GUNYAH_RESOURCE_TYPE_MSGQ_RX))
> +		return -EINVAL;
> +
> +	msgq->tx_ghrsc = tx_ghrsc;
> +	msgq->rx_ghrsc = rx_ghrsc;
> +
> +	msgq->mbox.dev = parent;
> +	msgq->mbox.ops = &gh_msgq_ops;
> +	msgq->mbox.chans = kcalloc(1, sizeof(*msgq->mbox.chans), GFP_KERNEL);

Error handling missing.

minor nit pick:

If you initialize num_chans to 1 before, then you can use that as the first
argument to kcalloc() which makes it more readable since you opted for kcalloc()
instead of kzalloc() there.

> +	msgq->mbox.num_chans = 1;
> +	msgq->mbox.txdone_irq = true;
> +
> +	if (gh_msgq_has_tx(msgq)) {
> +		ret = request_irq(msgq->tx_ghrsc->irq, gh_msgq_tx_irq_handler, 0, "gh_msgq_tx",
> +				msgq);
> +		if (ret)
> +			goto err_chans;
> +	}
> +
> +	if (gh_msgq_has_rx(msgq)) {
> +		ret = request_threaded_irq(msgq->rx_ghrsc->irq, NULL, gh_msgq_rx_irq_handler,
> +						IRQF_ONESHOT, "gh_msgq_rx", msgq);
> +		if (ret)
> +			goto err_tx_irq;
> +	}
> +
> +	tasklet_init(&msgq->txdone_tasklet, gh_msgq_txdone_tasklet, (unsigned long)msgq);

If you wish to use tasklets, use tasklet_setup().

> +
> +	ret = mbox_controller_register(&msgq->mbox);
> +	if (ret)
> +		goto err_rx_irq;
> +
> +	ret = mbox_bind_client(gh_msgq_chan(msgq), cl);
> +	if (ret)
> +		goto err_mbox;
> +
> +	return 0;
> +err_mbox:
> +	mbox_controller_unregister(&msgq->mbox);
> +err_rx_irq:
> +	if (gh_msgq_has_rx(msgq))
> +		free_irq(msgq->rx_ghrsc->irq, msgq);
> +err_tx_irq:
> +	if (gh_msgq_has_tx(msgq))
> +		free_irq(msgq->tx_ghrsc->irq, msgq);
> +err_chans:
> +	kfree(msgq->mbox.chans);
> +	return ret;
> +}
> +EXPORT_SYMBOL_GPL(gh_msgq_init);
> +
> +void gh_msgq_remove(struct gh_msgq *msgq)
> +{
> +	if (gh_msgq_has_rx(msgq))
> +		free_irq(msgq->rx_ghrsc->irq, msgq);
> +
> +	if (gh_msgq_has_tx(msgq))
> +		free_irq(msgq->tx_ghrsc->irq, msgq);
> +
> +	kfree(msgq->mbox.chans);
> +}
> +EXPORT_SYMBOL_GPL(gh_msgq_remove);
> +

Is gh_msgq_remove() supposed to undo every thing done in gh_msgq_init()?
ex: mbox controller and channel are not unregistered.

Thanks,
Pavan