Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Sat, 29 Oct 2022 20:31:53 +0800
From:   Shawn Guo <shawnguo@kernel.org>
To:     Ioana Ciornei <ioana.ciornei@nxp.com>
Cc:     leoyang.li@nxp.com, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, rmk+kernel@armlinux.org.uk,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 0/3] arch: dts: specify the MDC frequency on Layerscape
 DPAA2 devices
Message-ID: <20221029123153.GW125525@dragon>
References: <20221025144117.1010488-1-ioana.ciornei@nxp.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20221025144117.1010488-1-ioana.ciornei@nxp.com>
Precedence: bulk

On Tue, Oct 25, 2022 at 05:41:14PM +0300, Ioana Ciornei wrote:
> Up until now, the external MDIO controller frequency values relied
> either on the default ones out of reset or on those setup by u-boot.
> Let's just properly specify the MDC frequency in the DTS so that even
> without u-boot's intervention Linux can drive the MDIO bus.
> 
> This patch set adds the needed properties on all DPAA2 based SoCs.
> 
> Ioana Ciornei (3):
>   arm64: dts: lx2160a: specify clock frequencies for the MDIO
>     controllers
>   arm64: dts: ls1088a: specify clock frequencies for the MDIO
>     controllers
>   arm64: dts: ls208xa: specify clock frequencies for the MDIO
>     controllers

Applied all, thanks!