Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   isaku.yamahata@intel.com
To:     kvm@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     isaku.yamahata@intel.com, isaku.yamahata@gmail.com,
        Paolo Bonzini <pbonzini@redhat.com>, erdemaktas@google.com,
        Sean Christopherson <seanjc@google.com>,
        Sagi Shahar <sagis@google.com>,
        David Matlack <dmatlack@google.com>,
        Xiaoyao Li <xiaoyao.li@intel.com>,
        Sean Christopherson <sean.j.christopherson@intel.com>,
        Chao Gao <chao.gao@intel.com>
Subject: [PATCH v10 077/108] KVM: x86: Add a switch_db_regs flag to handle TDX's auto-switched behavior
Date:   Sat, 29 Oct 2022 23:23:18 -0700
Message-Id: <e7a026dce86cc2fc9397db92775b00cb29e82439.1667110240.git.isaku.yamahata@intel.com>
In-Reply-To: <cover.1667110240.git.isaku.yamahata@intel.com>
References: <cover.1667110240.git.isaku.yamahata@intel.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Isaku Yamahata <isaku.yamahata@intel.com>

Add a flag, KVM_DEBUGREG_AUTO_SWITCHED_GUEST, to skip saving/restoring DRs
irrespective of any other flags.  TDX-SEAM unconditionally saves and
restores guest DRs and reset to architectural INIT state on TD exit.
So, KVM needs to save host DRs before TD enter without restoring guest DRs
and restore host DRs after TD exit.

Opportunistically convert the KVM_DEBUGREG_* definitions to use BIT().

Reported-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Co-developed-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
---
 arch/x86/include/asm/kvm_host.h |  9 +++++++--
 arch/x86/kvm/vmx/tdx.c          |  1 +
 arch/x86/kvm/x86.c              | 11 ++++++++---
 3 files changed, 16 insertions(+), 5 deletions(-)

diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index fdb00d96e954..082e94f78c66 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -583,8 +583,13 @@ struct kvm_pmu {
 struct kvm_pmu_ops;
 
 enum {
-	KVM_DEBUGREG_BP_ENABLED = 1,
-	KVM_DEBUGREG_WONT_EXIT = 2,
+	KVM_DEBUGREG_BP_ENABLED		= BIT(0),
+	KVM_DEBUGREG_WONT_EXIT		= BIT(1),
+	/*
+	 * Guest debug registers are saved/restored by hardware on exit from
+	 * or enter guest. KVM needn't switch them.
+	 */
+	KVM_DEBUGREG_AUTO_SWITCH	= BIT(2),
 };
 
 struct kvm_mtrr_range {
diff --git a/arch/x86/kvm/vmx/tdx.c b/arch/x86/kvm/vmx/tdx.c
index fc4de83a2df8..57767ef3353b 100644
--- a/arch/x86/kvm/vmx/tdx.c
+++ b/arch/x86/kvm/vmx/tdx.c
@@ -429,6 +429,7 @@ int tdx_vcpu_create(struct kvm_vcpu *vcpu)
 
 	vcpu->arch.efer = EFER_SCE | EFER_LME | EFER_LMA | EFER_NX;
 
+	vcpu->arch.switch_db_regs = KVM_DEBUGREG_AUTO_SWITCH;
 	vcpu->arch.cr0_guest_owned_bits = -1ul;
 	vcpu->arch.cr4_guest_owned_bits = -1ul;
 
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 4d4b71c4cdb1..ad7b227b68dd 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -10779,7 +10779,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	if (vcpu->arch.guest_fpu.xfd_err)
 		wrmsrl(MSR_IA32_XFD_ERR, vcpu->arch.guest_fpu.xfd_err);
 
-	if (unlikely(vcpu->arch.switch_db_regs)) {
+	if (unlikely(vcpu->arch.switch_db_regs & ~KVM_DEBUGREG_AUTO_SWITCH)) {
 		set_debugreg(0, 7);
 		set_debugreg(vcpu->arch.eff_db[0], 0);
 		set_debugreg(vcpu->arch.eff_db[1], 1);
@@ -10822,6 +10822,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	 */
 	if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT)) {
 		WARN_ON(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP);
+		WARN_ON(vcpu->arch.switch_db_regs & KVM_DEBUGREG_AUTO_SWITCH);
 		static_call(kvm_x86_sync_dirty_debug_regs)(vcpu);
 		kvm_update_dr0123(vcpu);
 		kvm_update_dr7(vcpu);
@@ -10834,8 +10835,12 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	 * care about the messed up debug address registers. But if
 	 * we have some of them active, restore the old state.
 	 */
-	if (hw_breakpoint_active())
-		hw_breakpoint_restore();
+	if (hw_breakpoint_active()) {
+		if (!(vcpu->arch.switch_db_regs & KVM_DEBUGREG_AUTO_SWITCH))
+			hw_breakpoint_restore();
+		else
+			set_debugreg(__this_cpu_read(cpu_dr7), 7);
+	}
 
 	vcpu->arch.last_vmentry_cpu = vcpu->cpu;
 	vcpu->arch.last_guest_tsc = kvm_read_l1_tsc(vcpu, rdtsc());
-- 
2.25.1