Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Marijn Suijten <marijn.suijten@somainline.org>
To:     phone-devel@vger.kernel.org
Cc:     ~postmarketos/upstreaming@lists.sr.ht,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@somainline.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Martin Botka <martin.botka@somainline.org>,
        Jami Kettunen <jami.kettunen@somainline.org>,
        Marijn Suijten <marijn.suijten@somainline.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Luca Weiss <luca@z3ntu.xyz>, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 03/10] arm64: dts: qcom: sm6350-lena: Add SD Card Detect to sdc2 on/off pinctrl
Date:   Sun, 30 Oct 2022 08:32:25 +0100
Message-Id: <20221030073232.22726-4-marijn.suijten@somainline.org>
In-Reply-To: <20221030073232.22726-1-marijn.suijten@somainline.org>
References: <20221030073232.22726-1-marijn.suijten@somainline.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

In addition to the sdc2 pins, set the SD Card Detect pin in a sane state
to be used as an interrupt when an SD Card is slotted in or removed.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 .../qcom/sm6350-sony-xperia-lena-pdx213.dts    | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
index 36911b9a5c04..9a96000fc95b 100644
--- a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
+++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
@@ -30,6 +30,24 @@ framebuffer: framebuffer@a0000000 {
 	};
 };
 
+&sdc2_off_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&sdc2_on_state {
+	sd-cd-pins {
+		pins = "gpio94";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
 &sdhc_2 {
 	status = "okay";
 
-- 
2.38.1