Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Marijn Suijten <marijn.suijten@somainline.org>
To:     phone-devel@vger.kernel.org
Cc:     ~postmarketos/upstreaming@lists.sr.ht,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@somainline.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Martin Botka <martin.botka@somainline.org>,
        Jami Kettunen <jami.kettunen@somainline.org>,
        Marijn Suijten <marijn.suijten@somainline.org>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Luca Weiss <luca@z3ntu.xyz>, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 02/10] arm64: dts: qcom: sm6350: Add pinctrl for SDHCI 2
Date:   Sun, 30 Oct 2022 08:32:24 +0100
Message-Id: <20221030073232.22726-3-marijn.suijten@somainline.org>
In-Reply-To: <20221030073232.22726-1-marijn.suijten@somainline.org>
References: <20221030073232.22726-1-marijn.suijten@somainline.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Use the generic pin functions specifically for sdc2.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 44 ++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index a3ae765d9781..b98b881ebe7e 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1074,6 +1074,10 @@ sdhc_2: mmc@8804000 {
 					<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_SDCC_2 0>;
 			interconnect-names = "sdhc-ddr", "cpu-sdhc";
 
+			pinctrl-0 = <&sdc2_on_state>;
+			pinctrl-1 = <&sdc2_off_state>;
+			pinctrl-names = "default", "sleep";
+
 			qcom,dll-config = <0x0007642c>;
 			qcom,ddr-config = <0x80040868>;
 			power-domains = <&rpmhpd SM6350_CX>;
@@ -1316,6 +1320,46 @@ tlmm: pinctrl@f100000 {
 			#interrupt-cells = <2>;
 			gpio-ranges = <&tlmm 0 0 157>;
 
+			sdc2_off_state: sdc2-off-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			sdc2_on_state: sdc2-on-state {
+				clk-pins {
+					pins = "sdc2_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc2_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc2_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
 			qup_uart9_default: qup-uart9-default-state {
 				pins = "gpio25", "gpio26";
 				function = "qup13_f2";
-- 
2.38.1