Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Adam Skladowski <a39.skl@gmail.com>
Cc:     phone-devel@vger.kernel.org, ~postmarketos/upstreaming@lists.sr.ht,
        Adam Skladowski <a39.skl@gmail.com>,
        Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v2 0/1] Add MSM8976 Device tree
Date:   Tue,  1 Nov 2022 20:16:19 +0100
Message-Id: <20221101191659.172416-1-a39.skl@gmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
To:     unlisted-recipients:; (no To-header on input)
Precedence: bulk

This patch introduce devicetree for MSM8976 SoC,
most of already supported hardware should be described there.
Note about v2:
Based on advice from Bjorn i decided to keep clocks container,
this format appears in every other qcom dts.

Changes since v1
================
1. Dropped l1 i/d cache from cpu nodes.
2. Replaced xo_board with rpmcc where possible.
3. Added base address to memory node.
4. Padded addresses to 8 digits.
5. Moved imem to mmio range.
6. Adjusted mdss te pin name.
7. Reorganized reg positions per Konrad's request.

Adam Skladowski (1):
  arm64: dts: qcom: Add MSM8976 device tree

 arch/arm64/boot/dts/qcom/msm8976.dtsi | 1310 +++++++++++++++++++++++++
 1 file changed, 1310 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8976.dtsi

-- 
2.25.1