Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Andrew Davis <afd@ti.com>
To:     =?UTF-8?q?Beno=C3=AEt=20Cousson?= <bcousson@baylibre.com>,
        Tony Lindgren <tony@atomide.com>, Nishanth Menon <nm@ti.com>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        <linux-omap@vger.kernel.org>, <devicetree@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>
CC:     Andrew Davis <afd@ti.com>
Subject: [PATCH v2 0/2] AM57x EVM Device Tree Overlays
Date:   Tue, 1 Nov 2022 17:11:08 -0500
Message-ID: <20221101221110.17885-1-afd@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Hello all,

These is an uncontroversial (hopefully) DT Overlay to support the
TI AM57x EVM. More complex cases are staged and ready to follow but
wanted to test the water with this one.

For some reason dtbs_check does not get run on overlays, this
will need further investigation to fix in kbuild. For now I ran
it through manually but am not 100% sure it actually checked it,
so double checks here very welcome.

Series depends on https://www.spinics.net/lists/kernel/msg4548509.html

Thanks,
Andrew

Changes from v1:
 - Made touchscreen node name generic
 - Used proper interrupt flags

Andrew Davis (2):
  ARM: dts: ti: Add AM57xx GP EVM board support
  ARM: dts: ti: Add AM57xx GP EVM Rev A3 board support

 arch/arm/boot/dts/Makefile        |   4 +
 arch/arm/boot/dts/am57xx-evm.dtso | 127 ++++++++++++++++++++++++++++++
 2 files changed, 131 insertions(+)
 create mode 100644 arch/arm/boot/dts/am57xx-evm.dtso

-- 
2.37.3