Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Thu, 3 Nov 2022 18:04:44 +0530
From:   Manivannan Sadhasivam <mani@kernel.org>
To:     Johan Hovold <johan+linaro@kernel.org>
Cc:     Lorenzo Pieralisi <lpieralisi@kernel.org>,
        stanimir.k.varbanov@gmail.com, Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Bjorn Helgaas <bhelgaas@google.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Krzysztof =?utf-8?Q?Wilczy=C5=84ski?= <kw@linux.com>,
        Brian Masney <bmasney@redhat.com>,
        linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Georgi Djakov <djakov@kernel.org>
Subject: Re: [PATCH v3 2/2] PCI: qcom: Add basic interconnect support
Message-ID: <20221103123444.GE8434@thinkpad>
References: <20221102090705.23634-1-johan+linaro@kernel.org>
 <20221102090705.23634-3-johan+linaro@kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20221102090705.23634-3-johan+linaro@kernel.org>
Precedence: bulk

On Wed, Nov 02, 2022 at 10:07:05AM +0100, Johan Hovold wrote:
> On Qualcomm platforms like SC8280XP and SA8540P, interconnect bandwidth
> must be requested before enabling interconnect clocks.
> 
> Add basic support for managing an optional "pcie-mem" interconnect path
> by setting a low constraint before enabling clocks and updating it after
> the link is up.
> 
> Note that it is not possible for a controller driver to set anything but
> a maximum peak bandwidth as expected average bandwidth will vary with
> use case and actual use (and power policy?). This very much remains an
> unresolved problem with the interconnect framework.
> 
> Also note that no constraint is set for the SC8280XP/SA8540P "cpu-pcie"
> path for now as it is not clear what an appropriate constraint would be
> (and the system does not crash when left unspecified).
> 
> Fixes: 70574511f3fc ("PCI: qcom: Add support for SC8280XP")
> Reviewed-by: Brian Masney <bmasney@redhat.com>
> Acked-by: Georgi Djakov <djakov@kernel.org>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>

Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>

Thanks,
Mani

> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 76 ++++++++++++++++++++++++++
>  1 file changed, 76 insertions(+)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 7db94a22238d..91b113d0c02a 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -12,6 +12,7 @@
>  #include <linux/crc8.h>
>  #include <linux/delay.h>
>  #include <linux/gpio/consumer.h>
> +#include <linux/interconnect.h>
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
>  #include <linux/iopoll.h>
> @@ -224,6 +225,7 @@ struct qcom_pcie {
>  	union qcom_pcie_resources res;
>  	struct phy *phy;
>  	struct gpio_desc *reset;
> +	struct icc_path *icc_mem;
>  	const struct qcom_pcie_cfg *cfg;
>  };
>  
> @@ -1644,6 +1646,74 @@ static const struct dw_pcie_ops dw_pcie_ops = {
>  	.start_link = qcom_pcie_start_link,
>  };
>  
> +static int qcom_pcie_icc_init(struct qcom_pcie *pcie)
> +{
> +	struct dw_pcie *pci = pcie->pci;
> +	int ret;
> +
> +	pcie->icc_mem = devm_of_icc_get(pci->dev, "pcie-mem");
> +	if (IS_ERR(pcie->icc_mem))
> +		return PTR_ERR(pcie->icc_mem);
> +
> +	/*
> +	 * Some Qualcomm platforms require interconnect bandwidth constraints
> +	 * to be set before enabling interconnect clocks.
> +	 *
> +	 * Set an initial peak bandwidth corresponding to single-lane Gen 1
> +	 * for the pcie-mem path.
> +	 */
> +	ret = icc_set_bw(pcie->icc_mem, 0, MBps_to_icc(250));
> +	if (ret) {
> +		dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
> +			ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static void qcom_pcie_icc_update(struct qcom_pcie *pcie)
> +{
> +	struct dw_pcie *pci = pcie->pci;
> +	u32 offset, status, bw;
> +	int speed, width;
> +	int ret;
> +
> +	if (!pcie->icc_mem)
> +		return;
> +
> +	offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> +	status = readw(pci->dbi_base + offset + PCI_EXP_LNKSTA);
> +
> +	/* Only update constraints if link is up. */
> +	if (!(status & PCI_EXP_LNKSTA_DLLLA))
> +		return;
> +
> +	speed = FIELD_GET(PCI_EXP_LNKSTA_CLS, status);
> +	width = FIELD_GET(PCI_EXP_LNKSTA_NLW, status);
> +
> +	switch (speed) {
> +	case 1:
> +		bw = MBps_to_icc(250);
> +		break;
> +	case 2:
> +		bw = MBps_to_icc(500);
> +		break;
> +	default:
> +		WARN_ON_ONCE(1);
> +		fallthrough;
> +	case 3:
> +		bw = MBps_to_icc(985);
> +		break;
> +	}
> +
> +	ret = icc_set_bw(pcie->icc_mem, 0, width * bw);
> +	if (ret) {
> +		dev_err(pci->dev, "failed to set interconnect bandwidth: %d\n",
> +			ret);
> +	}
> +}
> +
>  static int qcom_pcie_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -1704,6 +1774,10 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  		goto err_pm_runtime_put;
>  	}
>  
> +	ret = qcom_pcie_icc_init(pcie);
> +	if (ret)
> +		goto err_pm_runtime_put;
> +
>  	ret = pcie->cfg->ops->get_resources(pcie);
>  	if (ret)
>  		goto err_pm_runtime_put;
> @@ -1722,6 +1796,8 @@ static int qcom_pcie_probe(struct platform_device *pdev)
>  		goto err_phy_exit;
>  	}
>  
> +	qcom_pcie_icc_update(pcie);
> +
>  	return 0;
>  
>  err_phy_exit:
> -- 
> 2.37.3
> 

-- 
மணிவண்ணன் சதாசிவம்