Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Rahul T R <r-ravikumar@ti.com>
To:     <nm@ti.com>
CC:     <vigneshr@ti.com>, <kristo@kernel.org>, <robh+dt@kernel.org>,
        <krzysztof.kozlowski+dt@linaro.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <r-ravikumar@ti.com>, <jkridner@gmail.com>
Subject: [PATCH v7 0/2] Enable RPi header on j721e sk
Date:   Thu, 3 Nov 2022 23:17:41 +0530
Message-ID: <20221103174743.16827-1-r-ravikumar@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

The following series of patches enables RPi header
on j721e sk. It is a 40 pin io expasion header which
brings out i2c5, ehrpwm 2,3 and some pins of gpio 0,1

v7:
   - Rebased to next-20221103
   - Move setting status diable to main dtsi

v6:
   - Rebased to 6.1-rc1

v5:
   - Enable only gpio's and i2c on the RPi Header
     as per the discussion in the v4

v4:
   - Correct the node name in dt binding example

v3:
   - Change node name from clock to clock-controller
   - Add correct description for clock-controller node

v2:
   - Add full path for clock property $ref
   - Remove the discription for clock pattern property,
     since $ref is added
   - Remove the label in the example
   - Fix the indentation in the example

Rahul T R (1):
  arm64: dts: ti: k3-j721e-sk: Add pinmux for RPi Header

Vijay Pothukuchi (1):
  arm64: dts: ti: k3-j721e-main: Add dts nodes for EHRPWMs

 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 68 ++++++++++++++++++++++-
 arch/arm64/boot/dts/ti/k3-j721e-sk.dts    | 59 ++++++++++++++++++++
 2 files changed, 126 insertions(+), 1 deletion(-)

-- 
2.38.0