Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932779AbXHFNvg (ORCPT ); Mon, 6 Aug 2007 09:51:36 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1754350AbXHFNv2 (ORCPT ); Mon, 6 Aug 2007 09:51:28 -0400 Received: from mail.suse.de ([195.135.220.2]:37358 "EHLO mx1.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753202AbXHFNv0 (ORCPT ); Mon, 6 Aug 2007 09:51:26 -0400 Date: Mon, 6 Aug 2007 15:51:24 +0200 From: Olaf Hering To: Benjamin Herrenschmidt Cc: Stefan Richter , Robert Hancock , linuxppc-dev@ozlabs.org, stable@kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH 2.6.22.y] ieee1394: revert "sbp2: enforce 32bit DMA mapping" Message-ID: <20070806135124.GA2900@suse.de> References: <46B4B3DC.7020609@shaw.ca> <46B4B7C6.1040107@s5r6.in-berlin.de> <1186272926.938.8.camel@localhost.localdomain> <46B5824B.1000103@s5r6.in-berlin.de> <1186351473.938.21.camel@localhost.localdomain> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline In-Reply-To: <1186351473.938.21.camel@localhost.localdomain> X-DOS: I got your 640K Real Mode Right Here Buddy! X-Homeland-Security: You are not supposed to read this line! You are a terrorist! User-Agent: Mutt und vi sind doch schneller als Notes (und GroupWise) Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 22325 Lines: 472 On Mon, Aug 06, Benjamin Herrenschmidt wrote: > BTW. Any reason why you don't set the DMA mask in the ohci driver rather > than the sbp2 one ? I used this patch, and the attached CD was found. What dma mask should be used in ohci_probe()? --- drivers/ieee1394/ohci1394.c | 2 ++ drivers/ieee1394/sbp2.c | 3 +++ drivers/pci/pci.c | 1 + drivers/pci/probe.c | 1 + include/asm-powerpc/dma-mapping.h | 1 + 5 files changed, 8 insertions(+) --- a/drivers/ieee1394/ohci1394.c +++ b/drivers/ieee1394/ohci1394.c @@ -3223,6 +3223,8 @@ static int __devinit ohci1394_pci_probe( } #endif /* CONFIG_PPC_PMAC */ + if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) + FAIL(-ENXIO, "Failed to set DMA mask"); if (pci_enable_device(dev)) FAIL(-ENXIO, "Failed to enable OHCI hardware"); pci_set_master(dev); --- a/drivers/ieee1394/sbp2.c +++ b/drivers/ieee1394/sbp2.c @@ -775,12 +775,15 @@ static struct sbp2_lu *sbp2_alloc_device goto failed_alloc; } #else + printk(KERN_DEBUG "%s():%u dev '%s' %p parent '%s' %p %016lx\n",__func__,__LINE__,hi->host->device.bus_id,hi->host->device.dma_mask,hi->host->device.parent->bus_id,(hi->host->device.parent->dma_mask),*(hi->host->device.parent->dma_mask)); if (dma_set_mask(hi->host->device.parent, DMA_32BIT_MASK)) { SBP2_ERR("failed to set 4GB DMA mask"); goto failed_alloc; } #endif } + else + printk(KERN_DEBUG "%s():%u dev '%s' parent '%s'\n",__func__,__LINE__,hi->host->device.bus_id,hi->host->device.parent->bus_id); /* Prevent unloading of the 1394 host */ if (!try_module_get(hi->host->driver->owner)) { --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1358,6 +1358,7 @@ pci_set_dma_mask(struct pci_dev *dev, u6 return -EIO; dev->dma_mask = mask; + printk(KERN_DEBUG "%s() '%s' %p %016lx\n",__func__,dev->dev.bus_id,dev->dev.dma_mask,*(dev->dev.dma_mask)); return 0; } --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -937,6 +937,7 @@ void pci_device_add(struct pci_dev *dev, set_dev_node(&dev->dev, pcibus_to_node(bus)); dev->dev.dma_mask = &dev->dma_mask; + printk(KERN_DEBUG "%s() '%s' %p %016lx\n",__func__,dev->dev.bus_id,dev->dev.dma_mask,*(dev->dev.dma_mask)); dev->dev.coherent_dma_mask = 0xffffffffull; /* Fix up broken headers */ --- a/include/asm-powerpc/dma-mapping.h +++ b/include/asm-powerpc/dma-mapping.h @@ -92,6 +92,7 @@ static inline int dma_set_mask(struct de { struct dma_mapping_ops *dma_ops = get_dma_ops(dev); + printk(KERN_DEBUG "%s() '%s' %016llx %p\n",__func__,dev->bus_id,(unsigned long long)dma_mask,dma_ops); if (unlikely(dma_ops == NULL)) return -EIO; if (dma_ops->set_dma_mask != NULL) Using PowerMac machine description Page orders: linear mapping = 24, virtual = 12, io = 12 Found initrd at 0xc000000001500000:0xc000000001763000 Found U3 memory controller & host bridge @ 0xf8000000 revision: 0x32 Mapped at 0xd000080080000000 Found a K2 mac-io controller, rev: 32, mapped at 0xd000080080041000 PowerMac motherboard: PowerMac G5 DART: table not allocated, using direct DMA Starting Linux PPC64 #4 SMP Mon Aug 6 15:40:01 CEST 2007 ----------------------------------------------------- ppc64_pft_size = 0x0 physicalMemorySize = 0x10000000 ppc64_caches.dcache_line_size = 0x80 ppc64_caches.icache_line_size = 0x80 htab_address = 0xc00000000f800000 htab_hash_mask = 0x7fff ----------------------------------------------------- Linux version 2.6.22.1-ppc64 (geeko@buildhost) (gcc version 4.1.2 20070115 (prerelease) (SUSE Linux)) #4 SMP Mon Aug 6 15:40:01 CEST 2007 [boot]0012 Setup Arch Top of RAM: 0x10000000, Total RAM: 0x10000000 Memory hole size: 0MB Entering add_active_range(0, 0, 65536) 0 entries of 256 used Found U3-AGP PCI host bridge. Firmware bus number: 240->255 Can't get bus-range for /ht@0,f2000000, assume bus 0 Found U3-HT PCI host bridge. Firmware bus number: 0->239 PCI Host 0, io start: 400000; io end: bfffff PCI Host 1, io start: 0; io end: 3fffff via-pmu: Server Mode is disabled PMU driver v2 initialized for Core99, firmware: 0c nvram: Checking bank 0... nvram: gen0=493, gen1=492 nvram: Active bank is: 0 nvram: OF partition at 0x410 nvram: XP partition at 0x1020 nvram: NR partition at 0x1120 Zone PFN ranges: DMA 0 -> 65536 Normal 65536 -> 65536 early_node_map[1] active PFN ranges 0: 0 -> 65536 On node 0 totalpages: 65536 DMA zone: 896 pages used for memmap DMA zone: 0 pages reserved DMA zone: 64640 pages, LIFO batch:15 Normal zone: 0 pages used for memmap [boot]0015 Setup Done Built 1 zonelists. Total pages: 64640 Kernel command line: mpic: Setting up MPIC " MPIC 1 " version 1.2 at 80040000, max 4 CPUs mpic: ISU size: 120, shift: 7, mask: 7f mpic: Initializing for 120 sources mpic: Setting up MPIC " MPIC 2 " version 1.2 at f8040000, max 4 CPUs mpic: ISU size: 120, shift: 7, mask: 7f mpic: Initializing for 120 sources PID hash table entries: 1024 (order: 10, 8192 bytes) time_init: decrementer frequency = 33.333333 MHz time_init: processor frequency = 1600.000000 MHz Console: colour dummy device 80x25 console handover: boot [udbg0] -> real [tty0] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) freeing bootmem node 0 Memory: 242692k/262144k available (5920k kernel code, 19452k reserved, 1384k data, 1103k bss, 292k init) Calibrating delay loop... 66.56 BogoMIPS (lpj=332800) Security Framework v1.0.0 initialized Mount-cache hash table entries: 256 PowerMac SMP probe found 1 cpus Brought up 1 CPUs NET: Registered protocol family 16 KeyWest i2c @0xf8001003 irq 42 /u3@0,f8000000/i2c@f8001000 channel 0 bus channel 1 bus KeyWest i2c @0x80018000 irq 26 /ht@0,f2000000/pci@3/mac-io@7/i2c@18000 channel 0 bus PMU i2c /ht@0,f2000000/pci@3/mac-io@7/via-pmu@16000/pmu-i2c channel 1 bus channel 2 bus CPU Hotplug not supported by firmware - disabling. PCI: Probing PCI hardware pci_device_add() '0000:f0:0b.0' c000000001978860 00000000ffffffff pci_device_add() '0000:f0:10.0' c00000000ff41860 00000000ffffffff pci_device_add() '0001:00:01.0' c00000000ff41060 0000000000000000 pci_device_add() '0001:06:03.0' c00000000ff47860 0000000000000000 pci_device_add() '0001:00:02.0' c00000000ff47060 0000000000000000 Can't get ranges for PCI-PCI bridge /ht@0,f2000000/pci@2 pci_device_add() '0001:00:03.0' c00000000ff48860 0000000000000000 pci_device_add() '0001:01:07.0' c00000000ff48060 0000000000000000 pci_device_add() '0001:01:08.0' c00000000ff4b860 0000000000000000 pci_device_add() '0001:01:09.0' c00000000ff4b060 0000000000000000 pci_device_add() '0001:00:04.0' c00000000ff6c860 0000000000000000 pci_device_add() '0001:02:0b.0' c00000000ff6c060 0000000000000000 pci_device_add() '0001:02:0b.1' c00000000ff6d860 0000000000000000 pci_device_add() '0001:02:0b.2' c00000000ff6d060 0000000000000000 pci_device_add() '0001:00:05.0' c00000000ff6e860 0000000000000000 pci_device_add() '0001:03:0d.0' c00000000ff6e060 0000000000000000 pci_device_add() '0001:03:0e.0' c00000000ff71860 0000000000000000 pci_device_add() '0001:00:06.0' c00000000ff71060 0000000000000000 pci_device_add() '0001:04:0f.0' c00000000ff72860 0000000000000000 pci_device_add() '0001:00:07.0' c00000000ff72060 0000000000000000 pci_device_add() '0001:05:0c.0' c00000000ff73860 0000000000000000 mapping IO f0000000 -> d000080000400000, size: 800000 mapping IO f4000000 -> d000080000000000, size: 400000 PCI: Probing PCI hardware done Registering pmac pic with sysfs... usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 2, 16384 bytes) TCP established hash table entries: 8192 (order: 5, 196608 bytes) TCP bind hash table entries: 8192 (order: 5, 131072 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered Unpacking initramfs... done Freeing initrd memory: 2444k freed nvram_init: Could not find nvram partition for nvram buffered error logging. rtas_flash: no firmware flash support IBM eBus Device Driver Registering G5 CPU frequency driver Frequency method: i2c/pfunc, Voltage method: i2c/pfunc Low: 1301 Mhz, High: 1600 Mhz, Cur: 1600 MHz audit: initializing netlink socket (disabled) audit(1186407931.610:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rpaphp: RPA HOT Plug PCI Controller Driver version: 0.1 rpadlpar_io_init: partition not DLPAR capable nvidiafb: Device ID: 10de0321 nvidiafb: CRTC0 analog not found nvidiafb: CRTC1 analog found nvidiafb: EDID found from BUS1 i2c-adapter i2c-1: unable to read EDID block. i2c-adapter i2c-1: unable to read EDID block. i2c-adapter i2c-1: unable to read EDID block. nvidiafb: Found OF EDID for head 2 nvidiafb: EDID found from BUS2 nvidiafb: CRTC 1appears to have a CRT attached nvidiafb: Using CRT on CRTC 1 Trying to im_free nonexistent area (d0000800800c1000) Console: switching to colour frame buffer device 160x64 nvidiafb: PCI nVidia NV32 framebuffer (64MB @ 0xA8000000) vio_register_driver: driver hvc_console registering HVSI: registered 0 devices Generic RTC Driver v1.07 pmac_zilog: 0.6 (Benjamin Herrenschmidt ) ttyS0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port ttyS1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port MacIO PCI driver attached to K2 chipset input: Macintosh mouse button emulation as /class/input/input0 PowerMac G5 Thermal control driver 1.3 adb: starting probe task... adb: finished probe task... Detected fan controls: 0: PWM fan, id 1, location: BACKSIDE,SYS CTRLR FAN 1: RPM fan, id 2, location: DRIVE BAY 2: PWM fan, id 2, location: SLOT,PCI FAN 3: RPM fan, id 3, location: CPU A INTAKE 4: RPM fan, id 4, location: CPU A EXHAUST 5: RPM fan, id 5, location: CPU B INTAKE 6: RPM fan, id 6, location: CPU B EXHAUST Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PCI: Enabling device: (0001:03:0d.0), cmd 16 ide0: Found Apple K2 ATA-6 controller, bus ID 3, irq 39 Probing IDE interface ide0... hda: PIONEER DVD-RW DVR-106D, ATAPI CD/DVD-ROM drive hda: Enabling Ultra DMA 2 ide0 at 0xd00008008729a000-0xd00008008729a007,0xd00008008729a160 on irq 39 PCI: Enabling device: (0001:02:0b.2), cmd 6 ehci_hcd 0001:02:0b.2: EHCI Host Controller ehci_hcd 0001:02:0b.2: new USB bus registered, assigned bus number 1 ehci_hcd 0001:02:0b.2: irq 63, io mem 0x80100000 ehci_hcd 0001:02:0b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: new device found, idVendor=0000, idProduct=0000 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.22.1-ppc64 ehci_hcd usb usb1: SerialNumber: 0001:02:0b.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver PCI: Enabling device: (0001:01:08.0), cmd 2 ohci_hcd 0001:01:08.0: OHCI Host Controller ohci_hcd 0001:01:08.0: new USB bus registered, assigned bus number 2 ohci_hcd 0001:01:08.0: irq 27, io mem 0x80081000 usb usb2: new device found, idVendor=0000, idProduct=0000 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd usb usb2: SerialNumber: 0001:01:08.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Enabling device: (0001:01:09.0), cmd 2 ohci_hcd 0001:01:09.0: OHCI Host Controller ohci_hcd 0001:01:09.0: new USB bus registered, assigned bus number 3 ohci_hcd 0001:01:09.0: irq 28, io mem 0x80080000 usb usb3: new device found, idVendor=0000, idProduct=0000 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd usb usb3: SerialNumber: 0001:01:09.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Enabling device: (0001:02:0b.0), cmd 2 ohci_hcd 0001:02:0b.0: OHCI Host Controller ohci_hcd 0001:02:0b.0: new USB bus registered, assigned bus number 4 ohci_hcd 0001:02:0b.0: irq 63, io mem 0x80102000 usb usb4: new device found, idVendor=0000, idProduct=0000 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd usb usb4: SerialNumber: 0001:02:0b.0 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected PCI: Enabling device: (0001:02:0b.1), cmd 2 ohci_hcd 0001:02:0b.1: OHCI Host Controller ohci_hcd 0001:02:0b.1: new USB bus registered, assigned bus number 5 ohci_hcd 0001:02:0b.1: irq 63, io mem 0x80101000 usb usb5: new device found, idVendor=0000, idProduct=0000 usb usb5: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.22.1-ppc64 ohci_hcd usb usb5: SerialNumber: 0001:02:0b.1 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected mice: PS/2 mouse device common for all mice PowerMac i2c bus pmu 2 registered PowerMac i2c bus pmu 1 registered PowerMac i2c bus mac-io 0 registered PowerMac i2c bus u3 1 registered PowerMac i2c bus u3 0 registered FCU Initialized, RPM fan shift is 3 usb 5-2: new full speed USB device using ohci_hcd and address 2 usb 5-2: new device found, idVendor=05ac, idProduct=1003 usb 5-2: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: Hub in Apple Extended USB Keyboard usb 5-2: Manufacturer: Mitsumi Electric usb 5-2: configuration #1 chosen from 1 choice hub 5-2:1.0: USB hub found hub 5-2:1.0: 3 ports detected usb 5-2.1: new low speed USB device using ohci_hcd and address 3 usb 5-2.1: new device found, idVendor=05ac, idProduct=0307 usb 5-2.1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2.1: Product: Apple Optical USB Mouse usb 5-2.1: Manufacturer: Logitech usb 5-2.1: configuration #1 chosen from 1 choice usb 5-2.3: new full speed USB device using ohci_hcd and address 4 usb 5-2.3: new device found, idVendor=05ac, idProduct=020c usb 5-2.3: new device strings: Mfr=1, Product=3, SerialNumber=0 usb 5-2.3: Product: Apple Extended USB Keyboard usb 5-2.3: Manufacturer: Mitsumi Electric usb 5-2.3: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech Apple Optical USB Mouse as /class/input/input1 input: USB HID v1.10 Mouse [Logitech Apple Optical USB Mouse] on usb-0001:02:0b.1-2.1 input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input2 input: USB HID v1.10 Keyboard [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.1-2.3 input: Mitsumi Electric Apple Extended USB Keyboard as /class/input/input3 input: USB HID v1.10 Device [Mitsumi Electric Apple Extended USB Keyboard] on usb-0001:02:0b.1-2.3 usbcore: registered new interface driver usbhid /dev/shm/R/linux-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver oprofile: using ppc64/970 performance monitoring. NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 input: PMU as /class/input/input4 Registered led device: pmu-front-led Freeing unused kernel memory: 292k freed SCSI subsystem initialized libata version 3.00 loaded. sata_svw 0001:05:0c.0: version 2.2 pci_set_dma_mask() '0001:05:0c.0' c00000000ff73860 00000000ffffffff scsi0 : sata_svw scsi1 : sata_svw scsi2 : sata_svw scsi3 : sata_svw ata1: SATA max UDMA/133 cmd 0xd0000800872a1000 ctl 0xd0000800872a1020 bmdma 0xd0000800872a1030 irq 16 ata2: SATA max UDMA/133 cmd 0xd0000800872a1100 ctl 0xd0000800872a1120 bmdma 0xd0000800872a1130 irq 16 ata3: SATA max UDMA/133 cmd 0xd0000800872a1200 ctl 0xd0000800872a1220 bmdma 0xd0000800872a1230 irq 16 ata4: SATA max UDMA/133 cmd 0xd0000800872a1300 ctl 0xd0000800872a1320 bmdma 0xd0000800872a1330 irq 16 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-6: ST380013AS, 3.05, max UDMA/133 ata1.00: 156301488 sectors, multi 0: LBA48 ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATA-7: Maxtor 6Y080M0, YAR511W0, max UDMA/133 ata2.00: 156312576 sectors, multi 0: LBA ata2.00: configured for UDMA/133 ata3: SATA link down (SStatus 4 SControl 300) ata4: SATA link down (SStatus 4 SControl 300) scsi 0:0:0:0: Direct-Access ATA ST380013AS 3.05 PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA Maxtor 6Y080M0 YAR5 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: [mac] sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sd 0:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: [sdb] 156312576 512-byte hardware sectors (80032 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 156312576 512-byte hardware sectors (80032 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: [mac] sdb1 sdb2 sdb3 sdb4 sdb5 sdb6 sdb7 sdb8 sd 1:0:0:0: [sdb] Attached SCSI disk kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 Linux agpgart interface v0.102 (c) Dave Jones agpgart: Detected Apple U3 chipset agpgart: configuring for size idx: 8 agpgart: AGP aperture is 32M @ 0x0 tg3.c:v3.77 (May 31, 2007) PCI: Enabling device: (0001:06:03.0), cmd 6 hda: ATAPI 32X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 snd-aoa-fabric-layout: found bus with layout 36 snd-aoa-fabric-layout: Using PMF GPIOs snd-aoa-codec-tas: found 'deq' node snd-aoa-fabric-layout: can use this codec snd-aoa-codec-tas: tas found, addr 0x35 on /ht@0,f2000000/pci@3/mac-io@7/i2c@18000/deq@6a pci_set_dma_mask() '0001:06:03.0' c00000000ff47860 ffffffffffffffff eth0: Tigon3 [partno(3C996B-T) rev 0105 PHY(5701)] (PCI:33MHz:64-bit) 10/100/1000Base-T Ethernet 00:04:76:f3:c2:4f eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[0] eth0: dma_rwctrl[76ff2d0f] dma_mask[64-bit] sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com) pci_set_dma_mask() '0001:04:0f.0' c00000000ff72860 00000000ffffffff PHY ID: 2062e0, addr: 1 eth1: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:0a:95:a6:5d:66 eth1: Found BCM5421-K2 PHY pci_set_dma_mask() '0001:03:0e.0' c00000000ff71860 00000000ffffffff PCI: Enabling device: (0001:03:0e.0), cmd 2 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[40] MMIO=[80200000-802007ff] Max Packet=[4096] IR/IT contexts=[8/8] Adding 1023992k swap on /dev/sdb3. Priority:-1 extents:1 across:1023992k device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com ieee1394: Node added: ID:BUS[0-00:1023] GUID[0010100305179115] ieee1394: Host added: ID:BUS[0-01:1023] GUID[000a95fffea65d66] sbp2_alloc_device():778 dev 'fw-host0' 0000000000000000 parent '0001:03:0e.0' c00000000ff71860 00000000ffffffff dma_set_mask() '0001:03:0e.0' 00000000ffffffff c0000000005fee68 scsi4 : SBP-2 IEEE-1394 loop: module loaded kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. REISERFS (device sdb4): found reiserfs format "3.6" with standard journal REISERFS (device sdb4): using ordered data mode reiserfs: using flush barriers REISERFS (device sdb4): journal params: device sdb4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 REISERFS (device sdb4): checking transaction log (sdb4) REISERFS (device sdb4): Using r5 hash to sort names eth1: Link is up at 100 Mbps, full-duplex. AppArmor: AppArmor initialized<5>audit(1186407949.200:2): info="AppArmor initialized" pid=1871 fuse init (API version 7.8) ieee1394: sbp2: Logged into SBP-2 device ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-85JS F100 PQ: 0 ANSI: 0 scsi 4:0:0:0: Attached scsi generic sg2 type 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda caddy sr 4:0:0:0: Attached scsi CD-ROM sr0 audit(1186407951.229:3): operation="file_lock" requested_mask="k" denied_mask="k" name="/var/run/klogd.pid" pid=1949 profile="/sbin/klogd" NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (1024 buckets, 8192 max) eth1: Link is up at 100 Mbps, full-duplex. eth1: Pause is enabled (rxfifo: 10240 off: 7168 on: 5632) audit(1186407961.889:4): operation="file_lock" requested_mask="k" denied_mask="k" name="/var/run/klogd.pid" pid=3061 profile="/sbin/klogd" audit(1186407962.979:5): audit_pid=3113 old=0 by auid=4294967295 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/