Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Johan Hovold <johan+linaro@kernel.org>
To:     Manivannan Sadhasivam <mani@kernel.org>
Cc:     Hemant Kumar <quic_hemantk@quicinc.com>, mhi@lists.linux.dev,
        linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
        Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH v2] mhi: pci_generic: add support for sc8280xp-crd SDX55 variant
Date:   Fri,  4 Nov 2022 10:39:13 +0100
Message-Id: <20221104093913.23347-1-johan+linaro@kernel.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The SC8280XP Compute Reference Design (CRD) has an on-PCB SDX55 modem
which uses MBIM.

The exact channel configuration is not known but the Foxconn SDX55
configuration allows the modem to be used so reuse that one for now.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---

Changes in v2
 - drop comment describing this variant (Mani)


 drivers/bus/mhi/host/pci_generic.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index caa4ce28cf9e..7dcd0ef3184a 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -542,6 +542,8 @@ static const struct mhi_pci_dev_info mhi_telit_fn990_info = {
 static const struct pci_device_id mhi_pci_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_QCOM, 0x0304),
 		.driver_data = (kernel_ulong_t) &mhi_qcom_sdx24_info },
+	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, PCI_VENDOR_ID_QCOM, 0x010c),
+		.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx55_info },
 	/* EM919x (sdx55), use the same vid:pid as qcom-sdx55m */
 	{ PCI_DEVICE_SUB(PCI_VENDOR_ID_QCOM, 0x0306, 0x18d7, 0x0200),
 		.driver_data = (kernel_ulong_t) &mhi_sierra_em919x_info },
-- 
2.37.3