Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Jernej =?utf-8?B?xaBrcmFiZWM=?= <jernej.skrabec@gmail.com>
To:     linux-media@vger.kernel.org, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev,
        linux-kernel@vger.kernel.org, linux-staging@lists.linux.dev,
        Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cc:     Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
        Mauro Carvalho Chehab <mchehab@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzk+dt@kernel.org>,
        Chen-Yu Tsai <wens@csie.org>,
        Samuel Holland <samuel@sholland.org>,
        Sakari Ailus <sakari.ailus@linux.intel.com>,
        Hans Verkuil <hans.verkuil@cisco.com>,
        Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
        Maxime Ripard <mripard@kernel.org>,
        Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: Re: [PATCH v8 3/6] staging: media: Add support for the Allwinner A31 ISP
Date:   Sun, 06 Nov 2022 10:12:22 +0100
Message-ID: <2320492.NG923GbCHz@jernej-laptop>
In-Reply-To: <20221103163717.246217-4-paul.kocialkowski@bootlin.com>
References: <20221103163717.246217-1-paul.kocialkowski@bootlin.com> <20221103163717.246217-4-paul.kocialkowski@bootlin.com>
MIME-Version: 1.0
Content-Transfer-Encoding: quoted-printable
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

Dne =C4=8Detrtek, 03. november 2022 ob 17:37:14 CET je Paul Kocialkowski=20
napisal(a):
> Some Allwinner platforms come with an Image Signal Processor, which
> supports various features in order to enhance and transform data
> received by image sensors into good-looking pictures. In most cases,
> the data is raw bayer, which gets internally converted to RGB and
> finally YUV, which is what the hardware produces.
>=20
> This driver supports ISPs that are similar to the A31 ISP, which was
> the first standalone ISP found in Allwinner platforms. Simpler ISP
> blocks were found in the A10 and A20, where they are tied to a CSI
> controller. Newer generations of Allwinner SoCs (starting with the
> H6, H616, etc) come with a new camera subsystem and revised ISP.
> Even though these previous and next-generation ISPs are somewhat
> similar to the A31 ISP, they have enough significant differences to
> be out of the scope of this driver.
>=20
> While the ISP supports many features, including 3A and many
> enhancement blocks, this implementation is limited to the following:
> - V3s (V3/S3) platform support;
> - Bayer media bus formats as input;
> - Semi-planar YUV (NV12/NV21) as output;
> - Debayering with per-component gain and offset configuration;
> - 2D noise filtering with configurable coefficients.
>=20
> Since many features are missing from the associated uAPI, the driver
> is aimed to integrate staging until all features are properly
> described.
>=20
> On the technical side, it uses the v4l2 and media controller APIs,
> with a video node for capture, a processor subdev and a video node
> for parameters submission. A specific uAPI structure and associated
> v4l2 meta format are used to configure parameters of the supported
> modules.
>=20
> One particular thing about the hardware is that configuration for
> module registers needs to be stored in a DMA buffer and gets copied
> to actual registers by the hardware at the next vsync, when instructed
> by a flag. This is handled by the "state" mechanism in the driver.
>=20
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>

This is pretty complex piece of code, so I trust you that it's tested.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>

Best regards,
Jernej