Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <d18aea2b-3ae8-2754-585d-ef763588461d@linaro.org>
Date:   Mon, 7 Nov 2022 10:53:24 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.15; rv:102.0)
 Gecko/20100101 Thunderbird/102.4.1
Subject: Re: [PATCH 1/3] arm64: dts: qcom: hk10: use "okay" instead of "ok"
To:     Robert Marko <robimarko@gmail.com>, agross@kernel.org,
        andersson@kernel.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
References: <20221107092930.33325-1-robimarko@gmail.com>
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <20221107092930.33325-1-robimarko@gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 07/11/2022 10:29, Robert Marko wrote:
> Use "okay" instead of "ok" in USB nodes as "ok" is deprecated.
> 
> Signed-off-by: Robert Marko <robimarko@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
>   arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 16 ++++++++--------
>   1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
> index db4b87944cdf..262b937e0bc6 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
> @@ -22,7 +22,7 @@ memory {
>   };
>   
>   &blsp1_spi1 {
> -	status = "ok";
> +	status = "okay";
>   
>   	flash@0 {
>   		#address-cells = <1>;
> @@ -34,33 +34,33 @@ flash@0 {
>   };
>   
>   &blsp1_uart5 {
> -	status = "ok";
> +	status = "okay";
>   };
>   
>   &pcie0 {
> -	status = "ok";
> +	status = "okay";
>   	perst-gpios = <&tlmm 58 0x1>;
>   };
>   
>   &pcie1 {
> -	status = "ok";
> +	status = "okay";
>   	perst-gpios = <&tlmm 61 0x1>;
>   };
>   
>   &pcie_phy0 {
> -	status = "ok";
> +	status = "okay";
>   };
>   
>   &pcie_phy1 {
> -	status = "ok";
> +	status = "okay";
>   };
>   
>   &qpic_bam {
> -	status = "ok";
> +	status = "okay";
>   };
>   
>   &qpic_nand {
> -	status = "ok";
> +	status = "okay";
>   
>   	nand@0 {
>   		reg = <0>;