Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <8dcc223d-48ab-f11d-5cc3-7fe129b9186d@linaro.org>
Date:   Mon, 7 Nov 2022 10:58:24 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10.15; rv:102.0)
 Gecko/20100101 Thunderbird/102.4.1
Subject: Re: [PATCH 2/3] arm64: dts: qcom: hk10: use GPIO flags for tlmm
To:     Robert Marko <robimarko@gmail.com>, agross@kernel.org,
        andersson@kernel.org, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
References: <20221107092930.33325-1-robimarko@gmail.com>
 <20221107092930.33325-2-robimarko@gmail.com>
From:   Konrad Dybcio <konrad.dybcio@linaro.org>
In-Reply-To: <20221107092930.33325-2-robimarko@gmail.com>
Content-Type: text/plain; charset=UTF-8; format=flowed
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 07/11/2022 10:29, Robert Marko wrote:
> Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of
> harcoding the cell value.
> 
> Signed-off-by: Robert Marko <robimarko@gmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

KOnrad
>   arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 5 +++--
>   1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
> index 262b937e0bc6..651a231554e0 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
> @@ -5,6 +5,7 @@
>   /dts-v1/;
>   
>   #include "ipq8074.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>   
>   / {
>   	aliases {
> @@ -39,12 +40,12 @@ &blsp1_uart5 {
>   
>   &pcie0 {
>   	status = "okay";
> -	perst-gpios = <&tlmm 58 0x1>;
> +	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
>   };
>   
>   &pcie1 {
>   	status = "okay";
> -	perst-gpios = <&tlmm 61 0x1>;
> +	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
>   };
>   
>   &pcie_phy0 {