Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934047AbXHFXU5 (ORCPT ); Mon, 6 Aug 2007 19:20:57 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1762192AbXHFXUr (ORCPT ); Mon, 6 Aug 2007 19:20:47 -0400 Received: from qb-out-0506.google.com ([72.14.204.224]:20250 "EHLO qb-out-0506.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758755AbXHFXUn (ORCPT ); Mon, 6 Aug 2007 19:20:43 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=beta; h=received:date:from:x-x-sender:to:cc:subject:message-id:mime-version:content-type; b=otKAoQ4RkwPxM5vZarE/6aq5JxxC3yXD0/nwhW+r9NUnRzkYhcL+7tl+aEaHFcs/B8NExv67UbJvK+cRrqnRrvom6E+7KH8qJ7dYYTzxO+zmTIfPTnoCBg0HcD1KJvvSuOvlIqPLTIoRwBwgGdfXA3oTWQ+mZSxMZWFvOwUFDcI= Date: Tue, 7 Aug 2007 07:20:36 +0800 (SGT) From: Jeff Chua X-X-Sender: root@boston.corp.fedex.com To: "H. Peter Anvin" cc: Indan Zupancic , Jan Engelhardt , "Antonino A. Daplas" , lkml , Linus Torvalds Subject: Re: Linux 2.6.23-rc2 Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII; format=flowed Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 20448 Lines: 419 Here's my dmesg ... Thanks, Jeff Linux version 2.6.23-rc2 (root@boston.corp.fedex.com) (gcc version 3.4.5) #5 SMP PREEMPT Sat Aug 4 13:03:10 SGT 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable) BIOS-e820: 00000000bf6d0000 - 00000000bf6df000 (ACPI data) BIOS-e820: 00000000bf6df000 - 00000000bf700000 (ACPI NVS) BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 2166MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f67f0 Entering add_active_range(0, 0, 784080) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 784080 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 784080 On node 0 totalpages: 784080 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 4333 pages used for memmap HighMem zone: 550371 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI present. ACPI: RSDP 000F67B0, 0024 (r2 LENOVO) ACPI: XSDT BF6D1828, 008C (r1 LENOVO TP-7B 2110 LTP 0) ACPI: FACP BF6D1900, 00F4 (r3 LENOVO TP-7B 2110 LNVO 1) ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] ACPI: DSDT BF6D1C90, CF2F (r1 LENOVO TP-7B 2110 MSFT 100000E) ACPI: FACS BF6F4000, 0040 ACPI: SSDT BF6D1AB4, 01DC (r1 LENOVO TP-7B 2110 MSFT 100000E) ACPI: ECDT BF6DEBBF, 0052 (r1 LENOVO TP-7B 2110 LNVO 1) ACPI: TCPA BF6DEC11, 0032 (r2 LENOVO TP-7B 2110 LNVO 1) ACPI: APIC BF6DEC43, 0068 (r1 LENOVO TP-7B 2110 LNVO 1) ACPI: MCFG BF6DECAB, 003C (r1 LENOVO TP-7B 2110 LNVO 1) ACPI: HPET BF6DECE7, 0038 (r1 LENOVO TP-7B 2110 LNVO 1) ACPI: SLIC BF6DEE62, 0176 (r1 LENOVO TP-7B 2110 LTP 0) ACPI: BOOT BF6DEFD8, 0028 (r1 LENOVO TP-7B 2110 LTP 1) ACPI: SSDT BF6F2645, 025F (r1 LENOVO TP-7B 2110 INTL 20050513) ACPI: SSDT BF6F28A4, 00A6 (r1 LENOVO TP-7B 2110 INTL 20050513) ACPI: SSDT BF6F294A, 04F7 (r1 LENOVO TP-7B 2110 INTL 20050513) ACPI: SSDT BF6F2E41, 01D8 (r1 LENOVO TP-7B 2110 INTL 20050513) ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:14 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:14 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c4000000 (gap: c0000000:30000000) swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000 swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000 Built 1 zonelists in Zone order. Total pages: 777955 Kernel command line: BOOT_IMAGE=(hd0,14)/linux/bzc1 root=/dev/sda2 resume=/dev/sda3 reboot=bios testing_only="this is got to be good. Now I can send in a very long line just like 2.4 and need not worry about the line being too long. What a great way to start a great year!!! Cool!" mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 1828.798 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3105480k/3136320k available (2531k kernel code, 29740k reserved, 1235k data, 224k init, 2218816k highmem) virtual kernel memory layout: fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) pkmap : 0xffc00000 - 0xffe00000 (2048 kB) vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc04b4000 - 0xc04ec000 ( 224 kB) .data : 0xc0378cc2 - 0xc04ad8e0 (1235 kB) .text : 0xc0100000 - 0xc0378cc2 (2531 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3661.54 BogoMIPS (lpj=7323093) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c1a9 00000000 00000000 00000000 Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM) Duo CPU L2500 @ 1.83GHz stepping 0c SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 3657.57 BogoMIPS (lpj=7315142) CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000 00000000 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c1a9 00000000 00000000 00000000 CPU1: Intel(R) Core(TM) Duo CPU L2500 @ 1.83GHz stepping 0c Total of 2 processors activated (7319.11 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: Measured 579667 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to: check_tsc_sync_source failed. Brought up 2 CPUs Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: EC description table is found, configuring boot EC ACPI: Interpreter enabled ACPI: (supports S0 S3) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62<6>ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 2.21 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 23 Time: hpet clocksource has been installed. pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved PCI: Bridge: 0000:00:1c.0 IO window: 2000-2fff MEM window: ee000000-ee0fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: 3000-4fff MEM window: ec000000-edffffff PREFETCH window: e4000000-e40fffff PCI: Bridge: 0000:00:1c.2 IO window: 5000-6fff MEM window: e8000000-e9ffffff PREFETCH window: e4100000-e41fffff PCI: Bridge: 0000:00:1c.3 IO window: 7000-8fff MEM window: ea000000-ebffffff PREFETCH window: e4200000-e42fffff PCI: Bus 22, cardbus bridge: 0000:15:00.0 IO window: 00009000-000090ff IO window: 00009400-000094ff PREFETCH window: e0000000-e3ffffff MEM window: c4000000-c7ffffff PCI: Bridge: 0000:00:1e.0 IO window: 9000-cfff MEM window: e4300000-e7ffffff PREFETCH window: e0000000-e3ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1c.2 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Enabling device 0000:00:1e.0 (0005 -> 0007) PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:15:00.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 9, 2097152 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x35 set to 0x1 highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered (default) Boot video device is 0000:00:02.0 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] Allocate Port Service[0000:00:1c.1:pcie02] PCI: Setting latency timer of device 0000:00:1c.2 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.2:pcie00] Allocate Port Service[0000:00:1c.2:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /devices/virtual/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/virtual/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /devices/virtual/input/input2 ACPI: Sleep Button (CM) [SLPB] ACPI: SSDT BF6F1D26, 0240 (r1 PmRef Cpu0Ist 100 INTL 20050513) ACPI: SSDT BF6F1FEB, 065A (r1 PmRef Cpu0Cst 100 INTL 20050513) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT BF6F1C5E, 00C8 (r1 PmRef Cpu1Ist 100 INTL 20050513) ACPI: SSDT BF6F1F66, 0085 (r1 PmRef Cpu1Cst 100 INTL 20050513) ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU1] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (55 C) ACPI: Thermal Zone [THM1] (55 C) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.102 agpgart: Detected an Intel 945GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20 [drm] Initialized i915 1.6.0 20060119 on minor 0 RAMDISK driver initialized: 16 RAM disks of 20480K size 1024 blocksize loop: module loaded thinkpad_acpi: ThinkPad ACPI Extras v0.15 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7BETD0WW (2.11 ), EC 7BHT40WW-1.13 thinkpad_acpi: Lenovo ThinkPad X60s thinkpad_acpi: radio switch found; radios are enabled input: ThinkPad Extra Buttons as /devices/virtual/input/input3 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 20 ICH7: chipset revision 2 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:pio, hdb:pio Probing IDE interface ide0... Clocksource tsc unstable (delta = -478084046 ns) Probing IDE interface ide0... Probing IDE interface ide1... megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007 ahci 0000:00:1f.2: version 2.3 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 cmd 0xf8846500 ctl 0x00000000 bmdma 0x00000000 irq 20 ata2: SATA max UDMA/133 cmd 0xf8846580 ctl 0x00000000 bmdma 0x00000000 irq 20 ata3: SATA max UDMA/133 cmd 0xf8846600 ctl 0x00000000 bmdma 0x00000000 irq 20 ata4: SATA max UDMA/133 cmd 0xf8846680 ctl 0x00000000 bmdma 0x00000000 irq 20 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used) ata1.00: configured for UDMA/100 ata2: SATA link down (SStatus 0 SControl 0) ata3: SATA link down (SStatus 0 SControl 0) ata4: SATA link down (SStatus 0 SControl 0) scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 > sd 0:0:0:0: [sda] Attached SCSI disk usbmon: debugfs is not available ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 21, io mem 0xee444000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 23, io base 0x00001860 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001880 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com EDAC MC: Ver: 2.1.0 Aug 4 2007 usb 5-2: new full speed USB device using uhci_hcd and address 2 usb 5-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC). ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1b.0 to 64 ALSA device list: #0: HDA Intel at 0xee240000 irq 22 nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5 VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 224k freed Adding 3719036k swap on /dev/sda3. Priority:-1 extents:1 across:3719036k - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/