Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Georgi Vlaev <g-vlaev@ti.com>
To:     Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
        Santosh Shilimkar <ssantosh@kernel.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
CC:     <linux-arm-kernel@lists.infradead.org>,
        <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
        Vibhore Vardhan <vibhore@ti.com>,
        Vignesh Raghavendra <vigneshr@ti.com>,
        Georgi Vlaev <g-vlaev@ti.com>
Subject: [PATCH v2 5/5] firmware: ti_sci: Introduce prepare system suspend call
Date:   Wed, 9 Nov 2022 00:45:27 +0200
Message-ID: <20221108224527.137179-6-g-vlaev@ti.com>
In-Reply-To: <20221108224527.137179-1-g-vlaev@ti.com>
References: <20221108224527.137179-1-g-vlaev@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

From: Dave Gerlach <d-gerlach@ti.com>

Introduce a ti_sci_prepare_system_suspend call to be used in the driver
suspend handler to allow the system to identify the low power mode being
entered and if necessary, send TI_SCI_MSG_BEGIN_SLEEP with information
about the mode is being entered and the address for allocated memory for
storing the context during Deep Sleep.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Vibhore Vardhan <vibhore@ti.com>
Signed-off-by: Georgi Vlaev <g-vlaev@ti.com>
---
 drivers/firmware/ti_sci.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c
index 4986df1b8570..a6d982685aca 100644
--- a/drivers/firmware/ti_sci.c
+++ b/drivers/firmware/ti_sci.c
@@ -3509,9 +3509,39 @@ static void ti_sci_set_is_suspending(struct ti_sci_info *info, bool is_suspendin
 	info->is_suspending = is_suspending;
 }
 
+static int ti_sci_prepare_system_suspend(struct ti_sci_info *info)
+{
+	int ret = 0;
+	int mode;
+
+	switch (pm_suspend_target_state) {
+	case PM_SUSPEND_MEM:
+		mode = TISCI_MSG_VALUE_SLEEP_MODE_DEEP_SLEEP;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	/*
+	 * Do not fail if we don't have action to take for a
+	 * specific suspend mode.
+	 */
+	if (ret)
+		return 0;
+
+	return ti_sci_cmd_prepare_sleep(&info->handle, mode,
+					(u32)(info->ctx_mem_addr & 0xffffffff),
+					(u32)(info->ctx_mem_addr >> 32), 0);
+}
+
 static int ti_sci_suspend(struct device *dev)
 {
 	struct ti_sci_info *info = dev_get_drvdata(dev);
+	int ret;
+
+	ret = ti_sci_prepare_system_suspend(info);
+	if (ret)
+		return ret;
 	/*
 	 * We must switch operation to polled mode now as drivers and the genpd
 	 * layer may make late TI SCI calls to change clock and device states
-- 
2.30.2