Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Bjorn Andersson <andersson@kernel.org>,
        Andy Gross <agross@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>
Subject: [PATCH v2 3/3] ARM: dts: qcom-msm8960-cdp: align TLMM pin configuration with DT schema
Date:   Wed,  9 Nov 2022 11:51:40 +0100
Message-Id: <20221109105140.48196-3-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20221109105140.48196-1-krzysztof.kozlowski@linaro.org>
References: <20221109105140.48196-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

---

Changes since v1:
1. Add Rb tag
---
 arch/arm/boot/dts/qcom-msm8960-cdp.dts | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
index 3a484ac53917..9a3a510f88ca 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -60,33 +60,32 @@ &gsbi5_serial {
 };
 
 &msmgpio {
-	spi1_default: spi1_default {
-		 mux {
-			pins = "gpio6", "gpio7", "gpio9";
-			function = "gsbi1";
-		 };
-
-		 mosi {
+	spi1_default: spi1-default-state {
+		 mosi-pins {
 			pins = "gpio6";
+			function = "gsbi1";
 			drive-strength = <12>;
 			bias-disable;
 		 };
 
-		 miso {
+		 miso-pins {
 			pins = "gpio7";
+			function = "gsbi1";
 			drive-strength = <12>;
 			bias-disable;
 		 };
 
-		 cs {
+		 cs-pins {
 			pins = "gpio8";
+			function = "gpio";
 			drive-strength = <12>;
 			bias-disable;
 			output-low;
 		 };
 
-		 clk {
+		 clk-pins {
 			pins = "gpio9";
+			function = "gsbi1";
 			drive-strength = <12>;
 			bias-disable;
 		 };
-- 
2.34.1