Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Oleksij Rempel <o.rempel@pengutronix.de>
To:     Woojung Huh <woojung.huh@microchip.com>,
        UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
        Vivien Didelot <vivien.didelot@gmail.com>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Vladimir Oltean <olteanv@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>
Cc:     Oleksij Rempel <o.rempel@pengutronix.de>, kernel@pengutronix.de,
        linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
        Arun.Ramadoss@microchip.com
Subject: [PATCH net-next v4 2/4] net: dsa: microchip: do not store max MTU for all ports
Date:   Thu, 10 Nov 2022 13:22:23 +0100
Message-Id: <20221110122225.1283326-3-o.rempel@pengutronix.de>
In-Reply-To: <20221110122225.1283326-1-o.rempel@pengutronix.de>
References: <20221110122225.1283326-1-o.rempel@pengutronix.de>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

If we have global MTU configuration, it is enough to configure it on CPU
port only.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 drivers/net/dsa/microchip/ksz9477.c    | 14 +++++---------
 drivers/net/dsa/microchip/ksz_common.h |  1 -
 2 files changed, 5 insertions(+), 10 deletions(-)

diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 602d00671bef..f6e7968ab105 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -45,19 +45,15 @@ static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
 
 int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu)
 {
-	u16 frame_size, max_frame = 0;
-	int i;
-
-	frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+	u16 frame_size;
 
-	/* Cache the per-port MTU setting */
-	dev->ports[port].max_frame = frame_size;
+	if (!dsa_is_cpu_port(dev->ds, port))
+		return 0;
 
-	for (i = 0; i < dev->info->port_cnt; i++)
-		max_frame = max(max_frame, dev->ports[i].max_frame);
+	frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
 
 	return regmap_update_bits(dev->regmap[1], REG_SW_MTU__2,
-				  REG_SW_MTU_MASK, max_frame);
+				  REG_SW_MTU_MASK, frame_size);
 }
 
 static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev)
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 27c26ee15af4..61228be299f9 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -95,7 +95,6 @@ struct ksz_port {
 
 	struct ksz_port_mib mib;
 	phy_interface_t interface;
-	u16 max_frame;
 	u32 rgmii_tx_val;
 	u32 rgmii_rx_val;
 	struct ksz_device *ksz_dev;
-- 
2.30.2