Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Fri, 11 Nov 2022 06:29:37 +0100
From:   Oleksij Rempel <o.rempel@pengutronix.de>
To:     Vladimir Oltean <olteanv@gmail.com>
Cc:     Woojung Huh <woojung.huh@microchip.com>,
        UNGLinuxDriver@microchip.com, Andrew Lunn <andrew@lunn.ch>,
        Vivien Didelot <vivien.didelot@gmail.com>,
        Florian Fainelli <f.fainelli@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Arun Ramadoss <arun.ramadoss@microchip.com>,
        kernel@pengutronix.de, linux-kernel@vger.kernel.org,
        netdev@vger.kernel.org
Subject: Re: [PATCH net-next v4 4/4] net: dsa: microchip: ksz8: add MTU
 configuration support
Message-ID: <20221111052937.GD27099@pengutronix.de>
References: <20221110122225.1283326-1-o.rempel@pengutronix.de>
 <20221110122225.1283326-5-o.rempel@pengutronix.de>
 <20221110130325.eklhybumv7naehxe@skbuf>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Disposition: inline
In-Reply-To: <20221110130325.eklhybumv7naehxe@skbuf>
User-Agent: Mutt/1.10.1 (2018-07-13)
Precedence: bulk

On Thu, Nov 10, 2022 at 03:03:25PM +0200, Vladimir Oltean wrote:
> On Thu, Nov 10, 2022 at 01:22:25PM +0100, Oleksij Rempel wrote:
> > Make MTU configurable on KSZ87xx and KSZ88xx series of switches.
> > 
> > Before this patch, pre-configured behavior was different on different
> > switch series, due to opposite meaning of the same bit:
> > - KSZ87xx: Reg 4, Bit 1 - if 1, max frame size is 1532; if 0 - 1514
> > - KSZ88xx: Reg 4, Bit 1 - if 1, max frame size is 1514; if 0 - 1532
> > 
> > Since the code was telling "... SW_LEGAL_PACKET_DISABLE, true)", I
> > assume, the idea was to set max frame size to 1532.
> > 
> > With this patch, by setting MTU size 1500, both switch series will be
> > configured to the 1532 frame limit.
> > 
> > This patch was tested on KSZ8873.
> > 
> > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> > Acked-by: Arun Ramadoss <arun.ramadoss@microchip.com>
> > ---
> 
> Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
> 
> As an extension to this patch set, you might also want to set
> ds->mtu_enforcement_ingress = true, to activate the bridge MTU
> normalization logic, since you have one MTU global to the entire switch.

Ok, I'll include it in to a different patch set. There are more patches
to mainline :)

Regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |