Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   William Breathitt Gray <william.gray@linaro.org>
To:     linus.walleij@linaro.org, brgl@bgdev.pl
Cc:     andriy.shevchenko@linux.intel.com, linux-gpio@vger.kernel.org,
        linux-kernel@vger.kernel.org, michael@walle.cc, broonie@kernel.org,
        William Breathitt Gray <william.gray@linaro.org>
Subject: [PATCH v2 1/4] gpio: regmap: Always set gpio_chip get_direction
Date:   Thu, 10 Nov 2022 20:55:50 -0500
Message-Id: <1805d1ddb5bbce8e86164e66421ddde481cce4f9.1668129763.git.william.gray@linaro.org>
In-Reply-To: <cover.1668129763.git.william.gray@linaro.org>
References: <cover.1668129763.git.william.gray@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

If you only have reg_dat_base set, then it is input-only; if you only
have reg_set_base set, then it is output-only. Thus, we can always set
gpio_chip get_direction to gpio_regmap_get_direction and return
GPIO_LINE_DIRECTION_IN/GPIO_LINE_DIRECTION_OUT given the respective
register base addresses configuration.

Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
---
 drivers/gpio/gpio-regmap.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c
index 6383136cbe59..f907c9c19fce 100644
--- a/drivers/gpio/gpio-regmap.c
+++ b/drivers/gpio/gpio-regmap.c
@@ -111,6 +111,11 @@ static int gpio_regmap_get_direction(struct gpio_chip *chip,
 	unsigned int base, val, reg, mask;
 	int invert, ret;
 
+	if (gpio->reg_dat_base && !gpio->reg_set_base)
+		return GPIO_LINE_DIRECTION_IN;
+	if (gpio->reg_set_base && !gpio->reg_dat_base)
+		return GPIO_LINE_DIRECTION_OUT;
+
 	if (gpio->reg_dir_out_base) {
 		base = gpio_regmap_addr(gpio->reg_dir_out_base);
 		invert = 0;
@@ -265,8 +270,8 @@ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config
 	else if (gpio->reg_set_base)
 		chip->set = gpio_regmap_set;
 
+	chip->get_direction = gpio_regmap_get_direction;
 	if (gpio->reg_dir_in_base || gpio->reg_dir_out_base) {
-		chip->get_direction = gpio_regmap_get_direction;
 		chip->direction_input = gpio_regmap_direction_input;
 		chip->direction_output = gpio_regmap_direction_output;
 	}
-- 
2.38.1