Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Feedback-ID: i0ad843c9:Fastmail
From:   Samuel Holland <samuel@sholland.org>
To:     Kishon Vijay Abraham I <kishon@kernel.org>,
        Vinod Koul <vkoul@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
        Jernej Skrabec <jernej.skrabec@gmail.com>,
        Maxime Ripard <mripard@kernel.org>
Cc:     Paul Kocialkowski <paul.kocialkowski@bootlin.com>,
        Samuel Holland <samuel@sholland.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        linux-phy@lists.infradead.org, linux-sunxi@lists.linux.dev
Subject: [PATCH v2 5/8] phy: allwinner: phy-sun6i-mipi-dphy: Make RX support optional
Date:   Sun, 13 Nov 2022 20:21:10 -0600
Message-Id: <20221114022113.31694-6-samuel@sholland.org>
In-Reply-To: <20221114022113.31694-1-samuel@sholland.org>
References: <20221114022113.31694-1-samuel@sholland.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

While all variants of the DPHY likely support RX mode, the new variant
in the A100 is not used in this direction by the BSP, and it has some
analog register changes, so its RX power-on sequence is unknown. To be
safe, limit RX support to variants where the power-on sequence is known.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

Changes in v2:
 - Rename "supports_rx" to "rx_supported"
 - Add a blank line for readability

 drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 26 +++++++++++++++++++--
 1 file changed, 24 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index 3900f1650851..7d7322670a83 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -114,6 +114,10 @@ enum sun6i_dphy_direction {
 	SUN6I_DPHY_DIRECTION_RX,
 };
 
+struct sun6i_dphy_variant {
+	bool	rx_supported;
+};
+
 struct sun6i_dphy {
 	struct clk				*bus_clk;
 	struct clk				*mod_clk;
@@ -123,6 +127,7 @@ struct sun6i_dphy {
 	struct phy				*phy;
 	struct phy_configure_opts_mipi_dphy	config;
 
+	const struct sun6i_dphy_variant		*variant;
 	enum sun6i_dphy_direction		direction;
 };
 
@@ -409,6 +414,10 @@ static int sun6i_dphy_probe(struct platform_device *pdev)
 	if (!dphy)
 		return -ENOMEM;
 
+	dphy->variant = device_get_match_data(&pdev->dev);
+	if (!dphy->variant)
+		return -EINVAL;
+
 	regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(regs)) {
 		dev_err(&pdev->dev, "Couldn't map the DPHY encoder registers\n");
@@ -445,8 +454,14 @@ static int sun6i_dphy_probe(struct platform_device *pdev)
 	ret = of_property_read_string(pdev->dev.of_node, "allwinner,direction",
 				      &direction);
 
-	if (!ret && !strncmp(direction, "rx", 2))
+	if (!ret && !strncmp(direction, "rx", 2)) {
+		if (!dphy->variant->rx_supported) {
+			dev_err(&pdev->dev, "RX not supported on this variant\n");
+			return -EOPNOTSUPP;
+		}
+
 		dphy->direction = SUN6I_DPHY_DIRECTION_RX;
+	}
 
 	phy_set_drvdata(dphy->phy, dphy);
 	phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate);
@@ -454,8 +469,15 @@ static int sun6i_dphy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
+static const struct sun6i_dphy_variant sun6i_a31_mipi_dphy_variant = {
+	.rx_supported	= true,
+};
+
 static const struct of_device_id sun6i_dphy_of_table[] = {
-	{ .compatible = "allwinner,sun6i-a31-mipi-dphy" },
+	{
+		.compatible	= "allwinner,sun6i-a31-mipi-dphy",
+		.data		= &sun6i_a31_mipi_dphy_variant,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sun6i_dphy_of_table);
-- 
2.37.3