Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Sinthu Raja <sinthu.raja@mistralsolutions.com>
To:     Nishanth Menon <nm@ti.com>, Tero Kristo <kristo@kernel.org>,
        Rob Herring <robh+dt@kernel.org>
Cc:     Vignesh Raghavendra <vigneshr@ti.com>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, Sinthu Raja <sinthu.raja@ti.com>
Subject: [PATCH V3 2/3] arm64: dts: ti: Add initial support for AM68 SK System on Module
Date:   Tue, 15 Nov 2022 21:18:31 +0530
Message-Id: <20221115154832.19759-3-sinthu.raja@ti.com>
In-Reply-To: <20221115154832.19759-1-sinthu.raja@ti.com>
References: <20221115154832.19759-1-sinthu.raja@ti.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Sinthu Raja <sinthu.raja@ti.com>

AM68 Starter Kit (SK)[1] is a low cost, small form factor board designed
for TI’s AM68 SoC. TI’s AM68 SoC comprises of dual core A72, high
performance vision accelerators, hardware accelerators, latest C71x
DSP, high bandwidth real-time IPs for capture and display. The SoC is
power optimized to provide best in class performance for industrial
applications.

    AM68 SK supports the following interfaces:
      * 16 GB LPDDR4 RAM
      * x1 Gigabit Ethernet interface
      * x1 USB 3.1 Type-C port
      * x2 USB 3.1 Type-A ports
      * x1 PCIe M.2 M Key
      * 512 Mbit OSPI flash
      * x2 CSI2 Camera interface (RPi and TI Camera connector)
      * 40-pin Raspberry Pi GPIO header

SK's System on Module (SoM) contains the SoC and DDR.
Therefore, add DT node for the SOC and DDR on the SoM.

Schematics: https://www.ti.com/lit/zip/SPRR463
TRM: http://www.ti.com/lit/pdf/spruj28

Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
---

Changes in V3:
Addressed review comments 
 - Removed the unused nodes that are disabled by default.
OSPI support will be added once the OSPI node is enabled for J721s2/AM68 in main DTSI.

V1: https://lore.kernel.org/linux-arm-kernel/20221018123849.23695-3-sinthu.raja@ti.com/
V2: https://lore.kernel.org/lkml/20221107123852.8063-3-sinthu.raja@ti.com/

 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 31 ++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi

diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
new file mode 100644
index 000000000000..e282eaafcbd5
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j721s2.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 16 GB RAM */
+		reg = <0x00 0x80000000 0x00 0x80000000>,
+		      <0x08 0x80000000 0x03 0x80000000>;
+	};
+
+	/* Reserving memory regions still pending */
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
-- 
2.36.1