Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Yassine Oudjana <yassine.oudjana@gmail.com>
To:     Linus Walleij <linus.walleij@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Matthias Brugger <matthias.bgg@gmail.com>,
        Sean Wang <sean.wang@kernel.org>,
        Andy Teng <andy.teng@mediatek.com>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@collabora.com>
Cc:     Yassine Oudjana <y.oudjana@protonmail.com>,
        Yassine Oudjana <yassine.oudjana@gmail.com>,
        linux-mediatek@lists.infradead.org, linux-gpio@vger.kernel.org,
        devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v5 2/7] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Improve pinctrl subnode and property descriptions
Date:   Fri, 18 Nov 2022 14:30:23 +0300
Message-Id: <20221118113028.145348-3-y.oudjana@protonmail.com>
In-Reply-To: <20221118113028.145348-1-y.oudjana@protonmail.com>
References: <20221118113028.145348-1-y.oudjana@protonmail.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

From: Yassine Oudjana <y.oudjana@protonmail.com>

Change "subnodes" to "subnode" in subnode description for better grammatical
accuracy, capitalize pinmux description, wrap all descriptions at 80 characters,
and remove literal style indicators from descriptions that don't need their new
lines preserved.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
---
 .../pinctrl/mediatek,mt6779-pinctrl.yaml      | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index d6231d11e949..9d481311cc6b 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -118,11 +118,12 @@ patternProperties:
     patternProperties:
       '^pins':
         type: object
-        description: |
-          A pinctrl node should contain at least one subnodes representing the
+        description:
+          A pinctrl node should contain at least one subnode representing the
           pinctrl groups available on the machine. Each subnode will list the
-          pins it needs, and how they should be configured, with regard to muxer
-          configuration, pullups, drive strength, input enable/disable and input schmitt.
+          pins it needs, and how they should be configured, with regard to
+          muxer configuration, pullups, drive strength, input enable/disable
+          and input schmitt.
         allOf:
           - $ref: pinmux-node.yaml
           - $ref: pincfg-node.yaml
@@ -130,9 +131,9 @@ patternProperties:
         properties:
           pinmux:
             description:
-              integer array, represents gpio pin number and mux setting.
-              Supported pin number and mux varies for different SoCs, and are defined
-              as macros in boot/dts/<soc>-pinfunc.h directly.
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in boot/dts/<soc>-pinfunc.h directly.
 
           bias-disable: true
 
@@ -141,7 +142,7 @@ patternProperties:
               - type: boolean
               - enum: [100, 101, 102, 103]
                 description: Pull up PUPD/R0/R1 type define value.
-            description: |
+            description:
               For normal pull up type, it is not necessary to specify R1R0
               values; When pull up type is PUPD/R0/R1, adding R1R0 defines
               will set different resistance values.
@@ -151,7 +152,7 @@ patternProperties:
               - type: boolean
               - enum: [100, 101, 102, 103]
                 description: Pull down PUPD/R0/R1 type define value.
-            description: |
+            description:
               For normal pull down type, it is not necessary to specify R1R0
               values; When pull down type is PUPD/R0/R1, adding R1R0 defines
               will set different resistance values.
-- 
2.38.1