Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Sat, 19 Nov 2022 11:08:31 +0800
From:   Shawn Guo <shawnguo@kernel.org>
To:     "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc:     s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com,
        linux-imx@nxp.com, linux-kernel@vger.kernel.org,
        linux-arm-kernel@lists.infradead.org, Peng Fan <peng.fan@nxp.com>,
        Marco Felsch <m.felsch@pengutronix.de>
Subject: Re: [PATCH V6 08/12] arm64: dts: imx8mn-evk: set off-on-delay-us in
 regulator
Message-ID: <20221119030830.GI16229@T480>
References: <20221117095403.1876071-1-peng.fan@oss.nxp.com>
 <20221117095403.1876071-9-peng.fan@oss.nxp.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20221117095403.1876071-9-peng.fan@oss.nxp.com>
User-Agent: Mutt/1.9.4 (2018-02-28)
Precedence: bulk

On Thu, Nov 17, 2022 at 05:53:59PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Some SD Card controller and power circuitry has increased capacitance,
> so the usual toggling of regulator to power the card off and on
> is insufficient.
> 
> According to SD spec, for sd card power reset operation, the sd card
> supply voltage needs to be lower than 0.5v and keep over 1ms, otherwise,
> next time power back the sd card supply voltage to 3.3v, sd card can't
> support SD3.0 mode again.
> 
> This patch add the off-on-delay-us, make sure the sd power reset behavior
> is align with the specification. Without this patch, when do quick system
> suspend/resume test, some sd card can't work at SD3.0 mode after system
> resume back.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>

Applied, thanks!