Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Matt Ranostay <mranostay@ti.com>
To:     <nm@ti.com>, <vigneshr@ti.com>, <kristo@kernel.org>,
        <robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
        <s-vadapalli@ti.com>, <r-gunasekaran@ti.com>
CC:     <linux-arm-kernel@lists.infradead.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v6 0/8] J721S2: Add support for additional IPs
Date:   Fri, 18 Nov 2022 20:08:58 -0800
Message-ID: <20221119040906.9495-1-mranostay@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

The following series of patches add support for the following
on J721S2 common processor board,

- USB
- SerDes
- OSPI
- PCIe

Changes from v1:
* Resolve issues with dt schema reporting
* Minor changes related to consistency on node naming and value

Changes from v2:
* Added PCIe RC + EP enablement patchsets
* Added device-id for j722s2 PCIe host in dt documentation
* Reworked SERDES + WIZ enablement patchset to use properies for clocks
  defines versus entire devicetree nodes. Results in cleaner code that
  doesn't break dt-schema or the driver functionality.

Changes from v3:
* Rebased changes on top of '[PATCH 00/12] TI J7x Disable Incomplete DT Nodes'
* Removed "dt-bindings: PCI: Add host mode device-id for j721s2 platform" patch and
  send it own series to avoid a dependency that would hold up other patches in this
  series

Changes from v4:
* Add my Signed-off-by lines to all patchsets

Changes from v5:
* Removed Cc from commit messages to reduce clutter
* Squashed changes for device tree nodes that get modified latter in the patchset
  series

Aswath Govindraju (7):
  arm64: dts: ti: k3-j721s2-main: Add support for USB
  arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
  arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0
  arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support
  arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes
  arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node
  arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe

Matt Ranostay (1):
  arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node

 .../dts/ti/k3-j721s2-common-proc-board.dts    |  92 ++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    | 157 ++++++++++++++++++
 .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi     |  40 +++++
 arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi  |  42 +++++
 4 files changed, 331 insertions(+)

-- 
2.38.GIT