Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <7f7a2966-62d1-c1e9-63c9-201881c9a3a6@linaro.org>
Date:   Sun, 20 Nov 2022 11:51:00 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.4.2
Subject: Re: [PATCH v2 2/3] arm64: dts: qcom: msm8916-acer-a1-724: Add initial
 device tree
Content-Language: en-US
To:     "Lin, Meng-Bo" <linmengbo0689@protonmail.com>,
        linux-kernel@vger.kernel.org
Cc:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Stephan Gerhold <stephan@gerhold.net>,
        Nikita Travkin <nikita@trvn.ru>, devicetree@vger.kernel.org,
        linux-arm-msm@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht
References: <20221119204209.94125-1-linmengbo0689@protonmail.com>
 <20221119204414.94287-1-linmengbo0689@protonmail.com>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20221119204414.94287-1-linmengbo0689@protonmail.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 19/11/2022 21:46, Lin, Meng-Bo wrote:
> Acer Iconia Talk S A1-724 is a tablet using the MSM8916 SoC released
> in 2014.
> 
> Note: The original firmware from Acer can only boot 32-bit kernels.
> To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware
> with EDL, e.g. taken from the DragonBoard 410c. This works because Acer
> didn't set up (firmware) secure boot.
> 
> Add a device tree for with initial support for:

Thank you for your patch. There is something to discuss/improve.

> +
> +/ {
> +	model = "Acer Iconia Talk S A1-724";
> +	compatible = "acer,a1-724", "qcom,msm8916";
> +	chassis-type = "tablet";
> +
> +	aliases {
> +		serial0 = &blsp1_uart2;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0";
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&gpio_keys_default>;
> +
> +		label = "GPIO Buttons";
> +
> +		button-volume-up {
> +			label = "Volume Up";
> +			gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
> +			linux,code = <KEY_VOLUMEUP>;
> +		};
> +	};
> +
> +	usb_id: usb-id {
> +		compatible = "linux,extcon-usb-gpio";
> +		id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&usb_id_default>;
> +	};
> +};
> +
> +&blsp1_uart2 {
> +	status = "okay";
> +};
> +
> +&pm8916_resin {
> +	status = "okay";

status is the last property

> +	linux,code = <KEY_VOLUMEDOWN>;
> +};
> +
> +&pm8916_vib {
> +	status = "okay";
> +};
> +
> +&pronto {
> +	status = "okay";
> +};
> +
> +&sdhc_1 {
> +	status = "okay";

Here as well and in all other places.


Best regards,
Krzysztof