Received: by 2002:a05:6358:d09b:b0:dc:cd0c:909e with SMTP id jc27csp4981960rwb; Mon, 21 Nov 2022 14:52:25 -0800 (PST) X-Google-Smtp-Source: AA0mqf5NfwmUEMRfZUYlSrFJEg+ioI0oKGbk6WcvSiF91wiWqsLIQsaYqev9vV8848ow4/D0zxPr X-Received: by 2002:a17:902:dad1:b0:188:5698:6b69 with SMTP id q17-20020a170902dad100b0018856986b69mr913635plx.142.1669071145453; Mon, 21 Nov 2022 14:52:25 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1669071145; cv=none; d=google.com; s=arc-20160816; b=Z1YUhtKjRuFnU4FRA/4Y/dsd6zMC34e5W3eWf7nV2jg5/jBuP+sFlRS6Oukb4hLKQ7 ahdEsUYfmgNDh9oH/oV8yNcDOMyTXKdMZBeQrpgXkyGSgJOCELrhxbchhJFY5UPpi63a ISs1A3mtPLc8dOav3tO8trYp33unEKM2yyWfleqlWg2HcByGSL1xEHvpRKoGT61wMMag +oDFYlyTcl4MOq8LaRZ+/LMjd9J9v0zlx0efvV5BwVDyp2RGA+fgQs1DTsyCdtqcKmwa jQvHZCEeZoPjYXysTif1rtBDzG0t8pSpDLzmNXG13ZGneR7H1JynpCvXw5d6AqsUfNdb xDvw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:in-reply-to :content-language:references:cc:to:subject:from:user-agent :mime-version:date:message-id:dkim-signature; bh=x+BHob8Eyp25zgDwDULnaJK6DKOTCBUHH6QyLHHp9m8=; b=RKgOqvJK405k5U8z14i9pfI4iaQyqbTfU52vY4vxmgMgNaukuPCq7JuYiwj6dgaqyp TN1bp1wm7lwRe0YQVsGk9QnShSrqbXxJ2ldxgV1m4F/lVpdcbEca9nmde7ornS9p8ni5 ayKZLC71zc0dhc0G3n5piPz8w79O+nqwYBmZNSQW6DmXQO4rbCYJoLF64mamPXPY3ykj gNd4lZe/Ixc6Gp9eYlxOAf+Al+eTrgw802yePHoCgIi/JHb5xlulZ1Olpkx3Om6VzWE4 T+mqWujgR1beVCO+AMYB0lJdqZUpLeVDmaz9hKchwbvdvhzY5YYRRBa8LBRUBHNXE6Go lngA== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@quicinc.com header.s=qcppdkim1 header.b=Ky8KpclD; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=quicinc.com Return-Path: Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id i13-20020a654d0d000000b0043aebb63fc9si12475661pgt.732.2022.11.21.14.52.12; Mon, 21 Nov 2022 14:52:25 -0800 (PST) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@quicinc.com header.s=qcppdkim1 header.b=Ky8KpclD; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=quicinc.com Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231671AbiKUVj4 (ORCPT + 91 others); Mon, 21 Nov 2022 16:39:56 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58188 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231526AbiKUVjz (ORCPT ); Mon, 21 Nov 2022 16:39:55 -0500 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 58C2D58021; Mon, 21 Nov 2022 13:39:52 -0800 (PST) Received: from pps.filterd (m0279867.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 2ALGmV3D012507; Mon, 21 Nov 2022 21:39:47 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=message-id : date : mime-version : from : subject : to : cc : references : in-reply-to : content-type : content-transfer-encoding; s=qcppdkim1; bh=x+BHob8Eyp25zgDwDULnaJK6DKOTCBUHH6QyLHHp9m8=; b=Ky8KpclD/tdDubou9gfNPPtVZoWPPcffLQLygzJbetj9USIa/bVC+v7TEqoDWoadN36b 6hhJETK6+NcBgeBKizK2d7ImzvuMW9xJWIsD7F+W0ghB1H+Wh0Btp/PFzJC5lr0K++nj va127jLG3jgxlyKdv7mOMEZNuYxnyemBYVcXpp3InbGryAKV/tmrIzm6YI9DD4wFp0Bu j0S7al8ACTSVpmnpLelMMvHIWiwYXmkdPZ21XB4qRn0ZjFHw+sGg0nYmfZDsaS7gO+zf mfYBfKgYOQOaCxtY9UnoeLZTPLJ+0+hCxHp1+YesdFwAg494OJHGPUfYYsH43bDM5D/A GA== Received: from nasanppmta05.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3kxrf5nt7h-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 21 Nov 2022 21:39:46 +0000 Received: from nasanex01b.na.qualcomm.com (nasanex01b.na.qualcomm.com [10.46.141.250]) by NASANPPMTA05.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 2ALLdkp6026116 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 21 Nov 2022 21:39:46 GMT Received: from [10.110.33.239] (10.80.80.8) by nasanex01b.na.qualcomm.com (10.46.141.250) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.36; Mon, 21 Nov 2022 13:39:45 -0800 Message-ID: <1633d309-05e3-e7bd-c1cd-54c1069bad5c@quicinc.com> Date: Mon, 21 Nov 2022 15:39:44 -0600 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:102.0) Gecko/20100101 Thunderbird/102.2.2 From: Melody Olvera Subject: Re: [PATCH v4 1/2] arm64: dts: qcom: Add base QDU1000/QRU1000 DTSIs To: Konrad Dybcio , Andy Gross , Bjorn Andersson , Rob Herring , Krzysztof Kozlowski CC: , , References: <20221118192241.29384-1-quic_molvera@quicinc.com> <20221118192241.29384-2-quic_molvera@quicinc.com> <8341830c-a09c-9366-096a-d58d34da36bd@linaro.org> Content-Language: en-US In-Reply-To: <8341830c-a09c-9366-096a-d58d34da36bd@linaro.org> Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nasanex01b.na.qualcomm.com (10.46.141.250) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: VsLIymTN6mbURfvrYkkAjts7o7T1lvYa X-Proofpoint-ORIG-GUID: VsLIymTN6mbURfvrYkkAjts7o7T1lvYa X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.219,Aquarius:18.0.895,Hydra:6.0.545,FMLib:17.11.122.1 definitions=2022-11-21_18,2022-11-18_01,2022-06-22_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 adultscore=0 mlxlogscore=999 spamscore=0 suspectscore=0 bulkscore=0 impostorscore=0 lowpriorityscore=0 malwarescore=0 priorityscore=1501 clxscore=1015 phishscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2210170000 definitions=main-2211210163 X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,NICE_REPLY_A,RCVD_IN_DNSWL_NONE, SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On 11/21/2022 5:03 AM, Konrad Dybcio wrote: > On 18.11.2022 20:22, Melody Olvera wrote: >> Add the base DTSI files for QDU1000 and QRU1000 SoCs, including base >> descriptions of CPUs, GCC, RPMHCC, QUP, TLMM, and interrupt-controller >> to boot to shell with console on these SoCs. >> >> Signed-off-by: Melody Olvera >> --- >> arch/arm64/boot/dts/qcom/qdu1000.dtsi | 1406 +++++++++++++++++++++++++ >> arch/arm64/boot/dts/qcom/qru1000.dtsi | 27 + >> 2 files changed, 1433 insertions(+) >> create mode 100644 arch/arm64/boot/dts/qcom/qdu1000.dtsi >> create mode 100644 arch/arm64/boot/dts/qcom/qru1000.dtsi >> >> diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi >> new file mode 100644 >> index 000000000000..8f1b52cc8ff4 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi >> @@ -0,0 +1,1406 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include > Hi! > > Please sort these. Sure thing. >> + >> +/ { >> + interrupt-parent = <&intc>; >> + >> + #address-cells = <2>; >> + #size-cells = <2>; >> + >> + chosen: chosen { }; >> + >> + cpus { >> + #address-cells = <2>; >> + #size-cells = <0>; >> + >> + CPU0: cpu@0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a55"; >> + reg = <0x0 0x0>; >> + enable-method = "psci"; >> + power-domain-names = "psci"; >> + power-domains = <&CPU_PD0>; >> + qcom,freq-domains = <&cpufreq_hw 0>; >> + next-level-cache = <&L2_0>; >> + L2_0: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + L3_0: l3-cache { >> + compatible = "cache"; >> + }; >> + }; >> + }; >> + >> + CPU1: cpu@100 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a55"; >> + reg = <0x0 0x100>; >> + enable-method = "psci"; >> + power-domains = <&CPU_PD1>; >> + power-domain-names = "psci"; >> + qcom,freq-domains = <&cpufreq_hw 0>; >> + next-level-cache = <&L2_100>; >> + L2_100: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU2: cpu@200 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a55"; >> + reg = <0x0 0x200>; >> + enable-method = "psci"; >> + power-domains = <&CPU_PD2>; >> + power-domain-names = "psci"; >> + qcom,freq-domains = <&cpufreq_hw 0>; >> + next-level-cache = <&L2_200>; >> + L2_200: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + CPU3: cpu@300 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a55"; >> + reg = <0x0 0x300>; >> + enable-method = "psci"; >> + power-domains = <&CPU_PD3>; >> + power-domain-names = "psci"; >> + qcom,freq-domains = <&cpufreq_hw 0>; >> + next-level-cache = <&L2_300>; >> + L2_300: l2-cache { >> + compatible = "cache"; >> + next-level-cache = <&L3_0>; >> + }; >> + }; >> + >> + cpu-map { >> + cluster0 { >> + core0 { >> + cpu = <&CPU0>; >> + }; >> + >> + core1 { >> + cpu = <&CPU1>; >> + }; >> + >> + core2 { >> + cpu = <&CPU2>; >> + }; >> + >> + core3 { >> + cpu = <&CPU3>; >> + }; >> + }; >> + }; >> + }; >> + >> + idle-states { >> + entry-method = "psci"; >> + >> + CPU_OFF: cpu-sleep-0 { >> + compatible = "arm,idle-state"; >> + entry-latency-us = <274>; >> + exit-latency-us = <480>; >> + min-residency-us = <3934>; >> + arm,psci-suspend-param = <0x40000004>; >> + local-timer-stop; >> + }; >> + }; >> + >> + domain-idle-states { >> + CLUSTER_SLEEP_0: cluster-sleep-0 { >> + compatible = "domain-idle-state"; >> + entry-latency-us = <584>; >> + exit-latency-us = <2332>; >> + min-residency-us = <6118>; >> + arm,psci-suspend-param = <0x41000044>; >> + }; >> + >> + CLUSTER_SLEEP_1: cluster-sleep-1 { >> + compatible = "domain-idle-state"; >> + entry-latency-us = <2893>; >> + exit-latency-us = <4023>; >> + min-residency-us = <9987>; >> + arm,psci-suspend-param = <0x41003344>; >> + }; >> + }; >> + >> + firmware { >> + scm { >> + compatible = "qcom,scm-qdu1000", "qcom,scm"; >> + }; >> + }; >> + >> + mc_virt: interconnect-0 { >> + compatible = "qcom,qdu1000-mc-virt"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + clk_virt: interconnect-1 { >> + compatible = "qcom,qdu1000-clk-virt"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + memory@80000000 { >> + device_type = "memory"; >> + /* We expect the bootloader to fill in the size */ >> + reg = <0x0 0x80000000 0x0 0x0>; >> + }; >> + >> + pmu { >> + compatible = "arm,armv8-pmuv3"; >> + interrupts = ; >> + }; >> + >> + psci { >> + compatible = "arm,psci-1.0"; >> + method = "smc"; >> + >> + CPU_PD0: power-domain-cpu0 { >> + #power-domain-cells = <0>; >> + power-domains = <&CLUSTER_PD>; >> + domain-idle-states = <&CPU_OFF>; >> + }; >> + >> + CPU_PD1: power-domain-cpu1 { >> + #power-domain-cells = <0>; >> + power-domains = <&CLUSTER_PD>; >> + domain-idle-states = <&CPU_OFF>; >> + }; >> + >> + CPU_PD2: power-domain-cpu2 { >> + #power-domain-cells = <0>; >> + power-domains = <&CLUSTER_PD>; >> + domain-idle-states = <&CPU_OFF>; >> + }; >> + >> + CPU_PD3: power-domain-cpu3 { >> + #power-domain-cells = <0>; >> + power-domains = <&CLUSTER_PD>; >> + domain-idle-states = <&CPU_OFF>; >> + }; >> + >> + CLUSTER_PD: power-domain-cluster { >> + #power-domain-cells = <0>; >> + domain-idle-states = <&CLUSTER_SLEEP_0 &CLUSTER_SLEEP_1>; >> + }; >> + }; >> + >> + reserved_memory: reserved-memory { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + >> + hyp_mem: memory@80000000 { > Nodes should not use 'memory@', but something more descriptive, > in this case you can use hyp@, for example. Ok, makes sense. >> + no-map; >> + reg = <0x0 0x80000000 0x0 0x600000>; > Please make reg the first property. Ok. >> + }; >> + >> + xbl_dt_log_mem: memory@80600000 { >> + no-map; >> + reg = <0x0 0x80600000 0x0 0x40000>; >> + }; >> + >> + xbl_ramdump_mem: memory@80640000 { >> + no-map; >> + reg = <0x0 0x80640000 0x0 0x1c0000>; >> + }; >> + >> + aop_image_mem: memory@80800000 { >> + no-map; >> + reg = <0x0 0x80800000 0x0 0x60000>; >> + }; >> + >> + aop_cmd_db_mem: memory@80860000 { >> + compatible = "qcom,cmd-db"; >> + no-map; >> + reg = <0x0 0x80860000 0x0 0x20000>; >> + }; >> + >> + aop_config_mem: memory@80880000 { >> + no-map; >> + reg = <0x0 0x80880000 0x0 0x20000>; >> + }; >> + >> + tme_crash_dump_mem: memory@808a0000 { >> + no-map; >> + reg = <0x0 0x808a0000 0x0 0x40000>; >> + }; >> + >> + tme_log_mem: memory@808e0000 { >> + no-map; >> + reg = <0x0 0x808e0000 0x0 0x4000>; >> + }; >> + >> + uefi_log_mem: memory@808e4000 { >> + no-map; >> + reg = <0x0 0x808e4000 0x0 0x10000>; >> + }; >> + >> + /* secdata region can be reused by apps */ >> + >> + smem_mem: memory@80900000 { >> + compatible = "qcom,smem"; >> + no-map; >> + reg = <0x0 0x80900000 0x0 0x200000>; >> + hwlocks = <&tcsr_mutex 3>; >> + }; >> + >> + cpucp_fw_mem: memory@80b00000 { >> + no-map; >> + reg = <0x0 0x80b00000 0x0 0x100000>; >> + }; >> + >> + xbl_sc_mem: memory@80c00000 { >> + no-map; >> + reg = <0x0 0x80c00000 0x0 0x40000>; >> + }; >> + >> + /* uefi region can be reused by apps */ >> + >> + tz_stat_mem: memory@81d00000 { >> + no-map; >> + reg = <0x0 0x81d00000 0x0 0x100000>; >> + }; >> + >> + tags_mem: memory@81e00000 { >> + no-map; >> + reg = <0x0 0x81e00000 0x0 0x500000>; >> + }; >> + >> + qtee_mem: memory@82300000 { >> + no-map; >> + reg = <0x0 0x82300000 0x0 0x500000>; >> + }; >> + >> + ta_mem: memory@82800000 { >> + no-map; >> + reg = <0x0 0x82800000 0x0 0xa00000>; >> + }; >> + >> + fs1_mem: memory@83200000 { >> + no-map; >> + reg = <0x0 0x83200000 0x0 0x400000>; >> + }; >> + >> + fs2_mem: memory@83600000 { >> + no-map; >> + reg = <0x0 0x83600000 0x0 0x400000>; >> + }; >> + >> + fs3_mem: memory@83a00000 { >> + no-map; >> + reg = <0x0 0x83a00000 0x0 0x400000>; >> + }; >> + >> + /* Linux kernel image is loaded at 0x83e00000 */ >> + >> + ipa_fw_mem: memory@8be00000 { >> + no-map; >> + reg = <0x0 0x8be00000 0x0 0x10000>; >> + }; >> + >> + ipa_gsi_mem: memory@8be10000 { >> + no-map; >> + reg = <0x0 0x8be10000 0x0 0x14000>; >> + }; >> + >> + mpss_mem: memory@8c000000 { >> + no-map; >> + reg = <0x0 0x8c000000 0x0 0x12c00000>; >> + }; >> + >> + q6_mpss_dtb_mem: memory@9ec00000 { >> + no-map; >> + reg = <0x0 0x9ec00000 0x0 0x80000>; >> + }; >> + >> + tenx_mem: memory@a0000000 { >> + no-map; >> + reg = <0x0 0xa0000000 0x0 0x19600000>; >> + }; >> + >> + oem_tenx_mem: memory@b9600000 { >> + no-map; >> + reg = <0x0 0xb9600000 0x0 0x6a00000>; >> + }; >> + >> + tenx_q6_buffer_mem: memory@c0000000 { >> + no-map; >> + reg = <0x0 0xc0000000 0x0 0x3200000>; >> + }; >> + >> + ipa_buffer_mem: memory@c3200000 { >> + no-map; >> + reg = <0x0 0xc3200000 0x0 0x12c00000>; >> + }; >> + }; >> + >> + soc: soc@0 { >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges = <0 0 0 0 0x10 0>; >> + dma-ranges = <0 0 0 0 0x10 0>; >> + compatible = "simple-bus"; >> + >> + gcc: clock-controller@80000 { >> + compatible = "qcom,gcc-qdu1000", "syscon"; >> + reg = <0x0 0x80000 0x0 0x1f4200>; >> + #clock-cells = <1>; >> + #reset-cells = <1>; >> + #power-domain-cells = <1>; > Please move #-cells below clocks. Got it. >> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>, >> + <&pcie_0_pipe_clk>, <&pcie_0_phy_aux_clk>, >> + <&usb3_phy_wrapper_pipe_clk>; >> + }; >> + >> + gpi_dma0: dma-controller@900000 { >> + compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma"; >> + #dma-cells = <3>; >> + reg = <0x0 0x900000 0x0 0x60000>; > compatible and reg should go first. Sure, for all nodes. >> + interrupts = , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + ; >> + dma-channels = <12>; >> + dma-channel-mask = <0x3f>; >> + iommus = <&apps_smmu 0xf6 0x0>; >> + }; >> + >> + qupv3_id_0: geniqup@9c0000 { >> + compatible = "qcom,geni-se-qup"; >> + reg = <0x0 0x9c0000 0x0 0x2000>; >> + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, >> + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; >> + clock-names = "m-ahb", "s-ahb"; >> + iommus = <&apps_smmu 0xe3 0x0>; >> + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 >> + &clk_virt SLAVE_QUP_CORE_0 0>; >> + interconnect-names = "qup-core"; >> + >> + #address-cells = <2>; >> + #size-cells = <2>; >> + ranges; >> + status = "disabled"; >> + >> + uart0: serial@980000 { >> + compatible = "qcom,geni-uart"; >> + reg = <0x0 0x980000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_uart0_default>; >> + interrupts = ; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + i2c1: i2c@984000 { >> + compatible = "qcom,geni-i2c"; >> + reg = <0x0 0x984000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; >> + interrupts = ; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_i2c1_data_clk>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + spi1: spi@984000 { >> + compatible = "qcom,geni-spi"; >> + reg = <0x0 0x984000 0x0 0x4000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupts = ; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; >> + status = "disabled"; >> + }; >> + >> + i2c2: i2c@988000 { >> + compatible = "qcom,geni-i2c"; >> + reg = <0x0 0x988000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; >> + interrupts = ; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_i2c2_data_clk>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + spi2: spi@988000 { >> + compatible = "qcom,geni-spi"; >> + reg = <0x0 0x988000 0x0 0x4000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupts = ; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; >> + status = "disabled"; >> + }; >> + >> + i2c3: i2c@98c000 { >> + compatible = "qcom,geni-i2c"; >> + reg = <0x0 0x98c000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; >> + interrupts = ; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_i2c3_data_clk>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + spi3: spi@98c000 { >> + compatible = "qcom,geni-spi"; >> + reg = <0x0 0x98c000 0x0 0x4000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupts = ; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; >> + status = "disabled"; >> + }; >> + >> + i2c4: i2c@990000 { >> + compatible = "qcom,geni-i2c"; >> + reg = <0x0 0x990000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; >> + interrupts = ; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_i2c4_data_clk>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + spi4: spi@990000 { >> + compatible = "qcom,geni-spi"; >> + reg = <0x0 0x990000 0x0 0x4000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupts = ; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; >> + status = "disabled"; >> + }; >> + >> + i2c5: i2c@994000 { >> + compatible = "qcom,geni-i2c"; >> + reg = <0x0 0x994000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; >> + interrupts = ; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_i2c5_data_clk>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + spi5: spi@994000 { >> + compatible = "qcom,geni-spi"; >> + reg = <0x0 0x994000 0x0 0x4000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupts = ; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; >> + status = "disabled"; >> + }; >> + >> + i2c6: i2c@998000 { >> + compatible = "qcom,geni-i2c"; >> + reg = <0x0 0x998000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; >> + interrupts = ; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_i2c6_data_clk>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + spi6: spi@998000 { >> + compatible = "qcom,geni-spi"; >> + reg = <0x0 0x998000 0x0 0x4000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupts = ; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; >> + status = "disabled"; >> + }; >> + >> + uart7: serial@99c000 { >> + compatible = "qcom,geni-debug-uart"; >> + reg = <0x0 0x99c000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>; >> + interrupts = ; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + }; >> + >> + gpi_dma1: dma-controller@a00000 { >> + compatible = "qcom,qdu1000-gpi-dma", "qcom,sm6350-gpi-dma"; >> + #dma-cells = <3>; >> + reg = <0x0 0xa00000 0x0 0x60000>; >> + interrupts = , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + ; >> + dma-channels = <12>; >> + dma-channel-mask = <0x3f>; >> + iommus = <&apps_smmu 0x116 0x0>; >> + }; >> + >> + qupv3_id_1: geniqup@ac0000 { >> + compatible = "qcom,geni-se-qup"; >> + reg = <0x0 0xac0000 0x0 0x2000>; >> + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, >> + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; >> + clock-names = "m-ahb", "s-ahb"; >> + iommus = <&apps_smmu 0x103 0x0>; >> + #address-cells = <2>; >> + #size-cells = <2>; >> + >> + ranges; >> + status = "disabled"; >> + >> + uart8: serial@a80000 { >> + compatible = "qcom,geni-uart"; >> + reg = <0x0 0xa80000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_uart8_default>; >> + interrupts = ; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + i2c9: i2c@a84000 { >> + compatible = "qcom,geni-i2c"; >> + reg = <0x0 0xa84000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; >> + interrupts = ; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_i2c9_data_clk>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + spi9: spi@a84000 { >> + compatible = "qcom,geni-spi"; >> + reg = <0x0 0xa84000 0x0 0x4000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupts = ; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; >> + status = "disabled"; >> + }; >> + >> + i2c10: i2c@a88000 { >> + compatible = "qcom,geni-i2c"; >> + reg = <0x0 0xa88000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; >> + interrupts = ; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_i2c10_data_clk>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + spi10: spi@a88000 { >> + compatible = "qcom,geni-spi"; >> + reg = <0x0 0xa88000 0x0 0x4000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupts = ; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; >> + status = "disabled"; >> + }; >> + >> + i2c11: i2c@a8c000 { >> + compatible = "qcom,geni-i2c"; >> + reg = <0x0 0xa8c000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; >> + interrupts = ; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_i2c11_data_clk>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + spi11: spi@a8c000 { >> + compatible = "qcom,geni-spi"; >> + reg = <0x0 0xa8c000 0x0 0x4000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupts = ; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; >> + status = "disabled"; >> + }; >> + >> + i2c12: i2c@a90000 { >> + compatible = "qcom,geni-i2c"; >> + reg = <0x0 0xa90000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; >> + interrupts = ; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_i2c12_data_clk>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + spi12: spi@a90000 { >> + compatible = "qcom,geni-spi"; >> + reg = <0x0 0xa90000 0x0 0x4000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupts = ; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; >> + status = "disabled"; >> + }; >> + >> + i2c13: i2c@a94000 { >> + compatible = "qcom,geni-i2c"; >> + reg = <0x0 0xa94000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; >> + interrupts = ; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_i2c13_data_clk>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + uart13: serial@a94000 { >> + compatible = "qcom,geni-uart"; >> + reg = <0x0 0xa94000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_uart13_default>; >> + interrupts = ; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + spi13: spi@a94000 { >> + compatible = "qcom,geni-spi"; >> + reg = <0x0 0xa94000 0x0 0x4000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupts = ; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; >> + status = "disabled"; >> + }; >> + >> + i2c14: i2c@a98000 { >> + compatible = "qcom,geni-i2c"; >> + reg = <0x0 0xa98000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; >> + interrupts = ; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_i2c14_data_clk>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + spi14: spi@a98000 { >> + compatible = "qcom,geni-spi"; >> + reg = <0x0 0xa98000 0x0 0x4000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupts = ; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; >> + status = "disabled"; >> + }; >> + >> + i2c15: i2c@a9c000 { >> + compatible = "qcom,geni-i2c"; >> + reg = <0x0 0xa9c000 0x0 0x4000>; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; >> + interrupts = ; >> + pinctrl-0 = <&qup_i2c15_data_clk>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + status = "disabled"; >> + }; >> + >> + spi15: spi@a9c000 { >> + compatible = "qcom,geni-spi"; >> + reg = <0x0 0xa9c000 0x0 0x4000>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + interrupts = ; >> + clock-names = "se"; >> + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; >> + status = "disabled"; >> + }; >> + }; >> + >> + system_noc: interconnect@1640000 { >> + reg = <0x0 0x1640000 0x0 0x45080>; >> + compatible = "qcom,qdu1000-system-noc"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + >> + tcsr_mutex: hwlock@1f40000 { >> + compatible = "qcom,tcsr-mutex"; >> + reg = <0x0 0x1f40000 0x0 0x20000>; >> + #hwlock-cells = <1>; >> + }; >> + >> + pdc: interrupt-controller@b220000 { >> + compatible = "qcom,qdu1000-pdc", "qcom,pdc"; >> + reg = <0x0 0xb220000 0x0 0x30000>, <0x0 0x174000f0 0x0 0x64>; >> + qcom,pdc-ranges = <0 480 12>, <14 494 24>, <40 520 54>, >> + <94 609 31>, <125 63 1>; >> + #interrupt-cells = <2>; >> + interrupt-parent = <&intc>; >> + interrupt-controller; >> + }; >> + >> + spmi_bus: spmi@c400000 { >> + compatible = "qcom,spmi-pmic-arb"; >> + reg = <0x0 0xc400000 0x0 0x3000>, >> + <0x0 0xc500000 0x0 0x400000>, >> + <0x0 0xc440000 0x0 0x80000>, >> + <0x0 0xc4c0000 0x0 0x10000>, >> + <0x0 0xc42d000 0x0 0x4000>; >> + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; >> + interrupt-names = "periph_irq"; >> + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; >> + qcom,ee = <0>; >> + qcom,channel = <0>; >> + #address-cells = <2>; >> + #size-cells = <0>; >> + interrupt-controller; >> + #interrupt-cells = <4>; >> + }; >> + >> + tlmm: pinctrl@f000000 { >> + compatible = "qcom,qdu1000-tlmm"; >> + reg = <0x0 0xf000000 0x0 0x1000000>; >> + interrupts = ; >> + gpio-controller; >> + #gpio-cells = <2>; >> + interrupt-controller; >> + #interrupt-cells = <2>; >> + gpio-ranges = <&tlmm 0 0 151>; >> + wakeup-parent = <&pdc>; >> + >> + qup_uart0_default: qup-uart0-default-state { >> + pins = "gpio6", "gpio7", "gpio8", "gpio9"; >> + function = "qup00"; >> + }; >> + >> + qup_i2c1_data_clk: qup-i2c1-data-clk-state { >> + pins = "gpio10", "gpio11"; >> + function = "qup01"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + >> + qup_spi1_data_clk: qup-spi1-data-clk-state { >> + pins = "gpio10", "gpio11", "gpio12"; >> + function = "qup01"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_spi1_cs: qup-spi1-cs-state { >> + pins = "gpio13"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_i2c2_data_clk: qup-i2c2-data-clk-state { >> + pins = "gpio12", "gpio13"; >> + function = "qup02"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + >> + qup_spi2_data_clk: qup-spi2-data-clk-state { >> + pins = "gpio12", "gpio13", "gpio10"; >> + function = "qup02"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_spi2_cs: qup-spi2-cs-state { >> + pins = "gpio11"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_i2c3_data_clk: qup-i2c3-data-clk-state { >> + pins = "gpio14", "gpio15"; >> + function = "qup03"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + >> + qup_spi3_data_clk: qup-spi3-data-clk-state { >> + pins = "gpio14", "gpio15", "gpio16"; >> + function = "qup03"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_spi3_cs: qup-spi3-cs-state { >> + pins = "gpio17"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_i2c4_data_clk: qup-i2c4-data-clk-state { >> + pins = "gpio16", "gpio17"; >> + function = "qup04"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + >> + qup_spi4_data_clk: qup-spi4-data-clk-state { >> + pins = "gpio16", "gpio17", "gpio14"; >> + function = "qup04"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_spi4_cs: qup-spi4-cs-state { >> + pins = "gpio15"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_i2c5_data_clk: qup-i2c5-data-clk-state { >> + pins = "gpio130", "gpio131"; >> + function = "qup05"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + >> + qup_spi5_data_clk: qup-spi5-data-clk-state { >> + pins = "gpio130", "gpio131", "gpio132"; >> + function = "qup05"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_spi5_cs: qup-spi5-cs-state { >> + pins = "gpio133"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_i2c6_data_clk: qup-i2c6-data-clk-state { >> + pins = "gpio132", "gpio133"; >> + function = "qup06"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + >> + qup_spi6_data_clk: qup-spi6-data-clk-state { >> + pins = "gpio132", "gpio133", "gpio130"; >> + function = "qup06"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_spi6_cs: qup-spi6-cs-state { >> + pins = "gpio131"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_uart7_rx: qup-uart7-rx-state { >> + pins = "gpio135"; >> + function = "qup07"; >> + drive-strength = <2>; >> + bias-disable; >> + }; >> + >> + qup_uart7_tx: qup-uart7-tx-state { >> + pins = "gpio134"; >> + function = "qup07"; >> + drive-strength = <2>; >> + bias-disable; >> + }; >> + >> + qup_uart8_default: qup-uart8-default-state { >> + pins = "gpio18", "gpio19", "gpio20", "gpio21"; >> + function = "qup10"; >> + }; >> + >> + qup_i2c9_data_clk: qup-i2c9-data-clk-state { >> + pins = "gpio22", "gpio23"; >> + function = "qup11"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + >> + qup_spi9_data_clk: qup-spi9-data-clk-state { >> + pins = "gpio22", "gpio23", "gpio24"; >> + function = "qup11"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_spi9_cs: qup-spi9-cs-state { >> + pins = "gpio25"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_i2c10_data_clk: qup-i2c10-data-clk-state { >> + pins = "gpio24", "gpio25"; >> + function = "qup12"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + >> + qup_spi10_data_clk: qup-spi10-data-clk-state { >> + pins = "gpio24", "gpio25", "gpio22"; >> + function = "qup12"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_spi10_cs: qup-spi10-cs-state { >> + pins = "gpio23"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_i2c11_data_clk: qup-i2c11-data-clk-state { >> + pins = "gpio26", "gpio27"; >> + function = "qup13"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + >> + qup_spi11_data_clk: qup-spi11-data-clk-state { >> + pins = "gpio26", "gpio27", "gpio28"; >> + function = "qup13"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_spi11_cs: qup-spi11-cs-state { >> + pins = "gpio29"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_i2c12_data_clk: qup-i2c12-data-clk-state { >> + pins = "gpio28", "gpio29"; >> + function = "qup14"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + >> + qup_spi12_data_clk: qup-spi12-data-clk-state { >> + pins = "gpio28", "gpio29", "gpio26"; >> + function = "qup14"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_spi12_cs: qup-spi12-cs-state { >> + pins = "gpio27"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_i2c13_data_clk: qup-i2c13-data-clk-state { >> + pins = "gpio30", "gpio31"; >> + function = "qup15"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + >> + qup_spi13_data_clk: qup-spi13-data-clk-state { >> + pins = "gpio30", "gpio31", "gpio32"; >> + function = "qup15"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_spi13_cs: qup-spi13-cs-state { >> + pins = "gpio33"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_uart13_default: qup-uart13-default-state { >> + pins = "gpio30", "gpio31", "gpio32", "gpio33"; >> + function = "qup15"; >> + }; >> + >> + qup_i2c14_data_clk: qup-i2c14-data-clk-state { >> + pins = "gpio34", "gpio35"; >> + function = "qup16"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + >> + qup_spi14_data_clk: qup-spi14-data-clk-state { >> + pins = "gpio34", "gpio35", "gpio36"; >> + function = "qup16"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_spi14_cs: qup-spi14-cs-state { >> + pins = "gpio37", "gpio38"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_i2c15_data_clk: qup-i2c15-data-clk-state { >> + pins = "gpio40", "gpio41"; >> + function = "qup17"; >> + drive-strength = <2>; >> + bias-pull-up; >> + }; >> + >> + qup_spi15_data_clk: qup-spi15-data-clk-state { >> + pins = "gpio40", "gpio41", "gpio30"; >> + function = "qup17"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + >> + qup_spi15_cs: qup-spi15-cs-state { >> + pins = "gpio31"; >> + drive-strength = <6>; >> + bias-disable; >> + }; >> + }; >> + >> + apps_smmu: iommu@15000000 { >> + compatible = "qcom,qdu1000-smmu-500", "arm,mmu-500"; >> + reg = <0x0 0x15000000 0x0 0x100000>; >> + #iommu-cells = <2>; >> + #global-interrupts = <2>; >> + interrupts = , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + , >> + ; >> + }; >> + >> + intc: interrupt-controller@17200000 { >> + compatible = "arm,gic-v3"; >> + #interrupt-cells = <3>; >> + interrupt-controller; >> + #redistributor-regions = <1>; >> + redistributor-stride = <0x0 0x20000>; >> + reg = <0x0 0x17200000 0x0 0x10000>, /* GICD */ >> + <0x0 0x17260000 0x0 0x80000>; /* GICR * 4 */ > compatible and reg should go first. Ack. >> + interrupts = ; >> + }; >> + >> + timer@17420000 { >> + compatible = "arm,armv7-timer-mem"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + ranges; >> + reg = <0x0 0x17420000 0x0 0x1000>; > compatible and reg should go first. Ack. >> + clock-frequency = <19200000>; > This should be removed if not necessary (on qcom CNTFRQ_ELn is > configured earlier, anyway). > > >> + >> + frame@17421000 { >> + frame-number = <0>; >> + interrupts = , >> + ; >> + reg = <0x17421000 0x1000>, >> + <0x17422000 0x1000>; > Please move reg up, in all subnodes. Ack. > > >> + }; >> + >> + frame@17423000 { >> + frame-number = <1>; >> + interrupts = ; >> + reg = <0x17423000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@17425000 { >> + frame-number = <2>; >> + interrupts = ; >> + reg = <0x17425000 0x1000>, >> + <0x17426000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@17427000 { >> + frame-number = <3>; >> + interrupts = ; >> + reg = <0x17427000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@17429000 { >> + frame-number = <4>; >> + interrupts = ; >> + reg = <0x17429000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@1742b000 { >> + frame-number = <5>; >> + interrupts = ; >> + reg = <0x1742b000 0x1000>; >> + status = "disabled"; >> + }; >> + >> + frame@1742d000 { >> + frame-number = <6>; >> + interrupts = ; >> + reg = <0x1742d000 0x1000>; >> + status = "disabled"; >> + }; >> + }; >> + >> + apps_rsc: rsc@17a00000 { >> + compatible = "qcom,rpmh-rsc"; >> + reg = <0x0 0x17a00000 0x0 0x10000>, >> + <0x0 0x17a10000 0x0 0x10000>, >> + <0x0 0x17a20000 0x0 0x10000>; >> + reg-names = "drv-0", "drv-1", "drv-2"; >> + interrupts = , >> + , >> + ; >> + qcom,tcs-offset = <0xd00>; >> + qcom,drv-id = <2>; >> + qcom,tcs-config = , , >> + , ; >> + label = "apps_rsc"; >> + >> + apps_bcm_voter: bcm-voter { >> + compatible = "qcom,bcm-voter"; >> + }; >> + >> + rpmhcc: clock-controller { >> + compatible = "qcom,qdu1000-rpmh-clk"; >> + #clock-cells = <1>; >> + clock-names = "xo"; >> + clocks = <&xo_board>; >> + }; >> + >> + rpmhpd: power-controller { >> + compatible = "qcom,qdu1000-rpmhpd"; >> + #power-domain-cells = <1>; >> + operating-points-v2 = <&rpmhpd_opp_table>; >> + >> + rpmhpd_opp_table: opp-table { >> + compatible = "operating-points-v2"; >> + >> + rpmhpd_opp_ret: opp1 { >> + opp-level = ; >> + }; >> + >> + rpmhpd_opp_min_svs: opp2 { >> + opp-level = ; >> + }; >> + >> + rpmhpd_opp_low_svs: opp3 { >> + opp-level = ; >> + }; >> + >> + rpmhpd_opp_svs: opp4 { >> + opp-level = ; >> + }; >> + >> + rpmhpd_opp_svs_l1: opp5 { >> + opp-level = ; >> + }; >> + >> + rpmhpd_opp_nom: opp6 { >> + opp-level = ; >> + }; >> + >> + rpmhpd_opp_nom_l1: opp7 { >> + opp-level = ; >> + }; >> + >> + rpmhpd_opp_nom_l2: opp8 { >> + opp-level = ; >> + }; >> + >> + rpmhpd_opp_turbo: opp9 { >> + opp-level = ; >> + }; >> + >> + rpmhpd_opp_turbo_l1: opp10 { >> + opp-level = ; >> + }; >> + }; >> + }; >> + }; >> + >> + cpufreq_hw: cpufreq@17d90000 { >> + compatible = "qcom,qdu1000-cpufreq-epss", "qcom,cpufreq-epss"; >> + reg = <0x0 0x17d90000 0x0 0x1000>, <0x0 0x17d91000 0x0 0x1000>; >> + reg-names = "freq-domain0", "freq-domain1"; >> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>; >> + clock-names = "xo", "alternate"; >> + #freq-domain-cells = <1>; >> + }; >> + >> + gem_noc: interconnect@19100000 { >> + reg = <0x0 0x19100000 0x0 0xB8080>; >> + compatible = "qcom,qdu1000-gem-noc"; >> + #interconnect-cells = <2>; >> + qcom,bcm-voters = <&apps_bcm_voter>; >> + }; >> + }; >> + >> + arch_timer: timer { >> + compatible = "arm,armv8-timer"; >> + interrupts = , >> + , >> + , >> + , >> + ; >> + clock-frequency = <19200000>; >> + }; >> +}; >> diff --git a/arch/arm64/boot/dts/qcom/qru1000.dtsi b/arch/arm64/boot/dts/qcom/qru1000.dtsi >> new file mode 100644 >> index 000000000000..074fe126e85e >> --- /dev/null >> +++ b/arch/arm64/boot/dts/qcom/qru1000.dtsi >> @@ -0,0 +1,27 @@ >> +// SPDX-License-Identifier: BSD-3-Clause >> +/* >> + * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> + >> +#include "qdu1000.dtsi" >> + >> +&reserved_memory { >> + /delete-node/ memory@a0000000; >> + /delete-node/ memory@b9600000; >> + /delete-node/ memory@c0000000; > Please delete memory nodes by referencing the label, so that > we don't have to cross-check the files every time. > > First DT: > some_region: something@a0000000 { [...] } > > > Second DT: > /delete-node/ &some_region; Sure thing. I was having some issues with this approach earlier, but seems to be working now. Thanks, Melody > > > Konrad > >> + >> + oem_tenx_mem: memory@a0000000 { >> + no-map; >> + reg = <0x0 0xa0000000 0x0 0x6400000>; >> + }; >> + >> + mpss_diag_buffer_mem: memory@aea00000 { >> + no-map; >> + reg = <0x0 0xaea00000 0x0 0x6400000>; >> + }; >> + >> + tenx_q6_buffer_mem: memory@b4e00000 { >> + no-map; >> + reg = <0x0 0xb4e00000 0x0 0x3200000>; >> + }; >> +};