Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Tue, 22 Nov 2022 13:25:16 +0000
To:     linux-kernel@vger.kernel.org
From:   "Lin, Meng-Bo" <linmengbo0689@protonmail.com>
Cc:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Stephan Gerhold <stephan@gerhold.net>,
        Nikita Travkin <nikita@trvn.ru>, devicetree@vger.kernel.org,
        linux-arm-msm@vger.kernel.org,
        ~postmarketos/upstreaming@lists.sr.ht
Subject: [PATCH v5 3/4] arm64: dts: qcom: msm8916-acer-a1-724: Add accelerometer/magnetometer
Message-ID: <20221122132405.257604-1-linmengbo0689@protonmail.com>
In-Reply-To: <20221122132142.257241-1-linmengbo0689@protonmail.com>
References: <20221121133732.207820-1-linmengbo0689@protonmail.com> <20221122132142.257241-1-linmengbo0689@protonmail.com>
Feedback-ID: 40467236:user:proton
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
Precedence: bulk

Iconia Talk S uses a Bosch BMC150 accelerometer/magnetometer combo.
The chip provides two separate I2C devices for the accelerometer
and magnetometer that are already supported by the bmc150-accel
and bmc150-magn driver.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 .../boot/dts/qcom/msm8916-acer-a1-724.dts     | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/=
boot/dts/qcom/msm8916-acer-a1-724.dts
index 593051ea92b6..bea0d022dd9a 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
@@ -6,6 +6,7 @@
=20
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
=20
 /*
  * NOTE: The original firmware from Acer can only boot 32-bit kernels.
@@ -51,6 +52,35 @@ usb_id: usb-id {
 =09};
 };
=20
+&blsp_i2c2 {
+=09status =3D "okay";
+
+=09accelerometer@10 {
+=09=09compatible =3D "bosch,bmc150_accel";
+=09=09reg =3D <0x10>;
+=09=09interrupt-parent =3D <&msmgpio>;
+=09=09interrupts =3D <115 IRQ_TYPE_EDGE_RISING>;
+
+=09=09vdd-supply =3D <&pm8916_l17>;
+=09=09vddio-supply =3D <&pm8916_l6>;
+
+=09=09pinctrl-names =3D "default";
+=09=09pinctrl-0 =3D <&accel_int_default>;
+
+=09=09mount-matrix =3D "0", "-1", "0",
+=09=09=09       "-1", "0", "0",
+=09=09=09       "0", "0", "1";
+=09};
+
+=09magnetometer@12 {
+=09=09compatible =3D "bosch,bmc150_magn";
+=09=09reg =3D <0x12>;
+
+=09=09vdd-supply =3D <&pm8916_l17>;
+=09=09vddio-supply =3D <&pm8916_l6>;
+=09};
+};
+
 &blsp1_uart2 {
 =09status =3D "okay";
 };
@@ -199,6 +229,14 @@ l18 {
 };
=20
 &msmgpio {
+=09accel_int_default: accel-int-default-state {
+=09=09pins =3D "gpio115";
+=09=09function =3D "gpio";
+
+=09=09drive-strength =3D <2>;
+=09=09bias-disable;
+=09};
+
 =09gpio_keys_default: gpio-keys-default-state {
 =09=09pins =3D "gpio107";
 =09=09function =3D "gpio";
--=20
2.30.2