Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20221122232721.2306102-1-yosryahmed@google.com> <Y31rSglEcTaaIg05@P9FQF9L96D.corp.robot.car>
In-Reply-To: <Y31rSglEcTaaIg05@P9FQF9L96D.corp.robot.car>
From:   Yosry Ahmed <yosryahmed@google.com>
Date:   Tue, 22 Nov 2022 16:45:50 -0800
Message-ID: <CAJD7tkZE6TLDShcntnY=tXnRpA6jx1uLMemeZtqWLZ3JAC_GNg@mail.gmail.com>
Subject: Re: [PATCH] mm: memcg: fix stale protection of reclaim target memcg
To:     Roman Gushchin <roman.gushchin@linux.dev>
Cc:     Shakeel Butt <shakeelb@google.com>,
        Johannes Weiner <hannes@cmpxchg.org>,
        Michal Hocko <mhocko@suse.com>, Yu Zhao <yuzhao@google.com>,
        Muchun Song <songmuchun@bytedance.com>,
        "Matthew Wilcox (Oracle)" <willy@infradead.org>,
        Vasily Averin <vasily.averin@linux.dev>,
        Vlastimil Babka <vbabka@suse.cz>,
        Chris Down <chris@chrisdown.name>,
        linux-kernel@vger.kernel.org, linux-mm@kvack.org
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

On Tue, Nov 22, 2022 at 4:37 PM Roman Gushchin <roman.gushchin@linux.dev> wrote:
>
> On Tue, Nov 22, 2022 at 11:27:21PM +0000, Yosry Ahmed wrote:
> > During reclaim, mem_cgroup_calculate_protection() is used to determine
> > the effective protection (emin and elow) values of a memcg. The
> > protection of the reclaim target is ignored, but we cannot set their
> > effective protection to 0 due to a limitation of the current
> > implementation (see comment in mem_cgroup_protection()). Instead,
> > we leave their effective protection values unchaged, and later ignore it
> > in mem_cgroup_protection().
> >
> > However, mem_cgroup_protection() is called later in
> > shrink_lruvec()->get_scan_count(), which is after the
> > mem_cgroup_below_{min/low}() checks in shrink_node_memcgs(). As a
> > result, the stale effective protection values of the target memcg may
> > lead us to skip reclaiming from the target memcg entirely, before
> > calling shrink_lruvec(). This can be even worse with recursive
> > protection, where the stale target memcg protection can be higher than
> > its standalone protection.
> >
> > An example where this can happen is as follows. Consider the following
> > hierarchy with memory_recursiveprot:
> > ROOT
> >  |
> >  A (memory.min = 50M)
> >  |
> >  B (memory.min = 10M, memory.high = 40M)
> >
> > Consider the following scenarion:
> > - B has memory.current = 35M.
> > - The system undergoes global reclaim (target memcg is NULL).
> > - B will have an effective min of 50M (all of A's unclaimed protection).
> > - B will not be reclaimed from.
> > - Now allocate 10M more memory in B, pushing it above it's high limit.
> > - The system undergoes memcg reclaim from B (target memcg is B)
> > - In shrink_node_memcgs(), we call mem_cgroup_calculate_protection(),
> >   which immediately returns for B without doing anything, as B is the
> >   target memcg, relying on mem_cgroup_protection() to ignore B's stale
> >   effective min (still 50M).
> > - Directly after mem_cgroup_calculate_protection(), we will call
> >   mem_cgroup_below_min(), which will read the stale effective min for B
> >   and skip it (instead of ignoring its protection as intended). In this
> >   case, it's really bad because we are not just considering B's
> >   standalone protection (10M), but we are reading a much higher stale
> >   protection (50M) which will cause us to not reclaim from B at all.
> >
> > This is an artifact of commit 45c7f7e1ef17 ("mm, memcg: decouple
> > e{low,min} state mutations from protection checks") which made
> > mem_cgroup_calculate_protection() only change the state without
> > returning any value. Before that commit, we used to return
> > MEMCG_PROT_NONE for the target memcg, which would cause us to skip the
> > mem_cgroup_below_{min/low}() checks. After that commit we do not return
> > anything and we end up checking the min & low effective protections for
> > the target memcg, which are stale.
> >
> > Add mem_cgroup_ignore_protection() that checks if we are reclaiming from
> > the target memcg, and call it in mem_cgroup_below_{min/low}() to ignore
> > the stale protection of the target memcg.
> >
> > Fixes: 45c7f7e1ef17 ("mm, memcg: decouple e{low,min} state mutations from protection checks")
> > Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
>
> Great catch!
> The fix looks good to me, only a couple of cosmetic suggestions.
>
> > ---
> >  include/linux/memcontrol.h | 33 +++++++++++++++++++++++++++------
> >  mm/vmscan.c                | 11 ++++++-----
> >  2 files changed, 33 insertions(+), 11 deletions(-)
> >
> > diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
> > index e1644a24009c..22c9c9f9c6b1 100644
> > --- a/include/linux/memcontrol.h
> > +++ b/include/linux/memcontrol.h
> > @@ -625,18 +625,32 @@ static inline bool mem_cgroup_supports_protection(struct mem_cgroup *memcg)
> >
> >  }
> >
> > -static inline bool mem_cgroup_below_low(struct mem_cgroup *memcg)
> > +static inline bool mem_cgroup_ignore_protection(struct mem_cgroup *target,
> > +                                             struct mem_cgroup *memcg)
> >  {
> > -     if (!mem_cgroup_supports_protection(memcg))
>
> How about to merge mem_cgroup_supports_protection() and your new helper into
> something like mem_cgroup_possibly_protected()? It seems like they never used
> separately and unlikely ever will be used.

Sounds good! I am thinking maybe mem_cgroup_no_protection() which is
an inlining of !mem_cgroup_supports_protection() ||
mem_cgorup_ignore_protection().

> Also, I'd swap target and memcg arguments.

Sounds good.

>
> Thank you!
>
>
> PS If it's not too hard, please, consider adding a new kselftest to cover this case.
> Thank you!

I will try to translate my bash test to something in test_memcontrol,
I don't plan to spend a lot of time on it though so I hope it's simple
enough..