Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED
Date:   Sun, 27 Nov 2022 21:32:38 +0100
Message-Id: <20221127203240.54955-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The preferred name suffix for properties with single and multiple GPIOs
is "gpios".  Linux GPIO core code supports both.  Bindings are going to
expect the "gpios" one:

  qcom/msm8996-xiaomi-gemini.dtb: lp5562@30: 'enable-gpio' does not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v1:
1. New patch
---
 arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index d8734913482f..dbd5f7e2df65 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -54,7 +54,7 @@ lp5562@30 {
 		reg = <0x30>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		enable-gpio = <&pm8994_gpios 7 1>;
+		enable-gpios = <&pm8994_gpios 7 1>;
 		clock-mode = /bits/8 <2>;
 		label = "button-backlight";
 
-- 
2.34.1