Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Mon, 28 Nov 2022 14:03:58 -0800
From:   Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
To:     Borislav Petkov <bp@alien8.de>
Cc:     Breno Leitao <leitao@debian.org>, tglx@linutronix.de,
        mingo@redhat.com, dave.hansen@linux.intel.com, hpa@zytor.com,
        jpoimboe@kernel.org, peterz@infradead.org, x86@kernel.org,
        cascardo@canonical.com, leit@meta.com, kexec@lists.infradead.org,
        linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] x86/bugs: Explicitly clear speculative MSR bits
Message-ID: <20221128220358.n5vk6youcdl2er35@desk>
References: <20221124104650.533427-1-leitao@debian.org>
 <Y4QD8o8kWb1V4osq@zn.tnic>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Disposition: inline
In-Reply-To: <Y4QD8o8kWb1V4osq@zn.tnic>
Precedence: bulk

On Mon, Nov 28, 2022 at 01:42:26AM +0100, Borislav Petkov wrote:
>On Thu, Nov 24, 2022 at 02:46:50AM -0800, Breno Leitao wrote:
>> Currently x86_spec_ctrl_base is read at boot time, and speculative bits
>> are set if configs are enable, such as MSR[SPEC_CTRL_IBRS] is enabled if
>> CONFIG_CPU_IBRS_ENTRY is configured. These MSR bits are not cleared if
>> the mitigations are disabled.
>>
>> This is a problem when kexec-ing a kernel that has the mitigation
>> disabled, from a kernel that has the mitigation enabled. In this case,
>> the MSR bits are carried forward and not cleared at the boot of the new
>> kernel. This might have some performance degradation that is hard to
>> find.
>>
>> This problem does not happen if the machine is (hard) rebooted, because
>> the bit will be cleared by default.
>>
>> This patch also defines a SPEC_CTRL_MASK macro, so, we can easily track
>> and clear if eventually some new mitigation shows up.
>
>Just remove that sentence - the macro's function is kinda obvious from
>the diff itself.
>
>> Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
>> Signed-off-by: Breno Leitao <leitao@debian.org>
>> ---
>>  arch/x86/include/asm/msr-index.h | 3 +++
>>  arch/x86/kernel/cpu/bugs.c       | 9 ++++++++-
>>  2 files changed, 11 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
>> index 4a2af82553e4..704f49580ee1 100644
>> --- a/arch/x86/include/asm/msr-index.h
>> +++ b/arch/x86/include/asm/msr-index.h
>> @@ -54,6 +54,9 @@
>>  #define SPEC_CTRL_RRSBA_DIS_S_SHIFT	6	   /* Disable RRSBA behavior */
>>  #define SPEC_CTRL_RRSBA_DIS_S		BIT(SPEC_CTRL_RRSBA_DIS_S_SHIFT)
>>
>> +#define SPEC_CTRL_MASK			(SPEC_CTRL_IBRS | SPEC_CTRL_STIBP | SPEC_CTRL_SSBD \
>> +							| SPEC_CTRL_RRSBA_DIS_S)
>
>Call that SPEC_CTRL_MITIGATIONS_MASK or so to denote what it is - a
>mask of the SPEC_CTRL bits which the kernel toggles when controlling
>mitigations.
>
>A comment above it wouldn't hurt either.
>
>> +
>>  #define MSR_IA32_PRED_CMD		0x00000049 /* Prediction Command */
>>  #define PRED_CMD_IBPB			BIT(0)	   /* Indirect Branch Prediction Barrier */
>>
>> diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
>> index 3e3230cccaa7..88957da1029b 100644
>> --- a/arch/x86/kernel/cpu/bugs.c
>> +++ b/arch/x86/kernel/cpu/bugs.c
>> @@ -137,8 +137,15 @@ void __init check_bugs(void)
>>  	 * have unknown values. AMD64_LS_CFG MSR is cached in the early AMD
>>  	 * init code as it is not enumerated and depends on the family.
>>  	 */
>> -	if (boot_cpu_has(X86_FEATURE_MSR_SPEC_CTRL))
>> +	if (boot_cpu_has(X86_FEATURE_MSR_SPEC_CTRL)) {
>>  		rdmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base);
>> +		/*
>> +		 * Previously running software may have some controls turned ON.
>
>"Previously running software, like kexec for example, ..."
>
>> +		 * Clear them and let kernel decide which controls to use.
>
>"Clear them and let the mitigations setup below set them based on configuration."
>
>> +		 */
>> +		x86_spec_ctrl_base &= ~SPEC_CTRL_MASK;
>> +		wrmsrl(MSR_IA32_SPEC_CTRL, x86_spec_ctrl_base);
>
>So this WRMSR will happen on the BSP only but the SPEC_CTRL MSR is
>per-CPU. As is x86_spec_ctrl_current which tracks it.
>
>So I'd say you don't need that WRMSR here - the proper value will get
>replicated eventually everywhere...

This patch is particularly for the case when user intends to turn off
the mitigations like with mitigations=off. In that case we need the
WRMSR because mitigation selection will simply return without writing to
the MSR on BSP.

As part of AP init x86_spec_ctrl_setup_ap() writes to the MSR even
when the mitigation is turned off, so AP's should have been fine, but I
think there is a subtle bug there as well. For below call:

x86_spec_ctrl_setup_ap(void)
{
	write_spec_ctrl_current(x86_spec_ctrl_base, true);

When x86_spec_ctrl_base is 0 MSR won't be written because of a check in
write_spec_ctrl_current() that doesn't write the MSR when the new value
(0) is same as x86_spec_ctrl_current (initialized to 0).

Below should fix the problem with APs:

---
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index 3e3230cccaa7..cfc2ed2661fc 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -66,7 +66,7 @@ static DEFINE_MUTEX(spec_ctrl_mutex);
   */
  void write_spec_ctrl_current(u64 val, bool force)
  {
-	if (this_cpu_read(x86_spec_ctrl_current) == val)
+	if (!force && this_cpu_read(x86_spec_ctrl_current) == val)
  		return;
  
  	this_cpu_write(x86_spec_ctrl_current, val);