Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Mark Jackson <mpfj@newflow.co.uk>
To:     =?UTF-8?q?Beno=C3=AEt=20Cousson?= <bcousson@baylibre.com>,
        Tony Lindgren <tony@atomide.com>,
        Mark Jackson <mpfj@newflow.co.uk>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v2 RESEND 2/5] ARM: dts: am335x-nano: Enable RS485 mode for UART3 & 4
Date:   Wed, 30 Nov 2022 14:05:44 +0000
Message-Id: <20221130140547.295859-3-mpfj@newflow.co.uk>
In-Reply-To: <20221130140547.295859-1-mpfj@newflow.co.uk>
References: <20221130140547.295859-1-mpfj@newflow.co.uk>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

UART3 & 4 are both RS485 ports.
So we need to configure and enable this by default.

Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
---
 arch/arm/boot/dts/am335x-nano.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 05cbfe24f778..cecc2afaeff4 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -187,12 +187,22 @@ &uart2 {
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins>;
+	rts-gpio = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rx-during-tx;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
 	status = "okay";
 };
 
 &uart4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart4_pins>;
+	rts-gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+	rs485-rts-active-high;
+	rs485-rx-during-tx;
+	rs485-rts-delay = <1 1>;
+	linux,rs485-enabled-at-boot-time;
 	status = "okay";
 };
 
-- 
2.34.1