Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Fri, 2 Dec 2022 19:23:04 +0100
From:   Andrew Lunn <andrew@lunn.ch>
To:     Michael Walle <michael@walle.cc>
Cc:     Xu Liang <lxu@maxlinear.com>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        Russell King <linux@armlinux.org.uk>,
        "David S . Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org
Subject: Re: [PATCH net-next v1 1/4] net: phy: mxl-gpy: add MDINT workaround
Message-ID: <Y4pCiOHgNCPLyZzA@lunn.ch>
References: <20221202151204.3318592-1-michael@walle.cc>
 <20221202151204.3318592-2-michael@walle.cc>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20221202151204.3318592-2-michael@walle.cc>
Precedence: bulk

On Fri, Dec 02, 2022 at 04:12:01PM +0100, Michael Walle wrote:
> At least the GPY215B and GPY215C has a bug where it is still driving the
> interrupt line (MDINT) even after the interrupt status register is read
> and its bits are cleared. This will cause an interrupt storm.
> 
> Although the MDINT is multiplexed with a GPIO pin and theoretically we
> could switch the pinmux to GPIO input mode, this isn't possible because
> the access to this register will stall exactly as long as the interrupt
> line is asserted. We exploit this very fact and just read a random
> internal register in our interrupt handler. This way, it will be delayed
> until the external interrupt line is released and an interrupt storm is
> avoided.
> 
> The internal register access via the mailbox was deduced by looking at
> the downstream PHY API because the datasheet doesn't mention any of
> this.
> 
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
>  drivers/net/phy/mxl-gpy.c | 83 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 83 insertions(+)
> 
> diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
> index 0ff7ef076072..20e610dda891 100644
> --- a/drivers/net/phy/mxl-gpy.c
> +++ b/drivers/net/phy/mxl-gpy.c
> @@ -9,6 +9,7 @@
>  #include <linux/module.h>
>  #include <linux/bitfield.h>
>  #include <linux/hwmon.h>
> +#include <linux/mutex.h>
>  #include <linux/phy.h>
>  #include <linux/polynomial.h>
>  #include <linux/netdevice.h>
> @@ -81,6 +82,14 @@
>  #define VSPEC1_TEMP_STA	0x0E
>  #define VSPEC1_TEMP_STA_DATA	GENMASK(9, 0)
>  
> +/* Mailbox */
> +#define VSPEC1_MBOX_DATA	0x5
> +#define VSPEC1_MBOX_ADDRLO	0x6
> +#define VSPEC1_MBOX_CMD		0x7
> +#define VSPEC1_MBOX_CMD_ADDRHI	GENMASK(7, 0)
> +#define VSPEC1_MBOX_CMD_RD	(0 << 8)
> +#define VSPEC1_MBOX_CMD_READY	BIT(15)
> +
>  /* WoL */
>  #define VPSPEC2_WOL_CTL		0x0E06
>  #define VPSPEC2_WOL_AD01	0x0E08
> @@ -88,7 +97,15 @@
>  #define VPSPEC2_WOL_AD45	0x0E0A
>  #define WOL_EN			BIT(0)
>  
> +/* Internal registers, access via mbox */
> +#define REG_GPIO0_OUT		0xd3ce00
> +
>  struct gpy_priv {
> +	struct phy_device *phydev;
> +
> +	/* serialize mailbox acesses */
> +	struct mutex mbox_lock;
> +

>  static int gpy_probe(struct phy_device *phydev)
>  {
>  	struct device *dev = &phydev->mdio.dev;
> @@ -228,7 +286,9 @@ static int gpy_probe(struct phy_device *phydev)
>  	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>  	if (!priv)
>  		return -ENOMEM;
> +	priv->phydev = phydev;

I don't think you use this anywhere. Maybe in one of the following
patches?

	Andrew