Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
MIME-Version: 1.0
References: <20221205085351.27566-1-tmaimon77@gmail.com> <20221205085351.27566-3-tmaimon77@gmail.com>
In-Reply-To: <20221205085351.27566-3-tmaimon77@gmail.com>
From:   Andy Shevchenko <andy.shevchenko@gmail.com>
Date:   Mon, 5 Dec 2022 12:54:05 +0200
Message-ID: <CAHp75VeAzgCUiH5Z1pVJ-4X29aCK44q907DRQXX75zS4oEhHHg@mail.gmail.com>
Subject: Re: [PATCH v2 2/2] mmc: sdhci-npcm: Add NPCM SDHCI driver
To:     Tomer Maimon <tmaimon77@gmail.com>
Cc:     ulf.hansson@linaro.org, avifishman70@gmail.com,
        tali.perry1@gmail.com, joel@jms.id.au, venture@google.com,
        yuenn@google.com, benjaminfair@google.com, adrian.hunter@intel.com,
        skhan@linuxfoundation.org, davidgow@google.com,
        pbrobinson@gmail.com, gsomlo@gmail.com, briannorris@chromium.org,
        arnd@arndb.de, krakoczy@antmicro.com, openbmc@lists.ozlabs.org,
        linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Content-Type: text/plain; charset="UTF-8"
Precedence: bulk

On Mon, Dec 5, 2022 at 10:54 AM Tomer Maimon <tmaimon77@gmail.com> wrote:
>
> Add Nuvoton NPCM BMC sdhci-pltfm controller driver.

Thank you for an update, my comments below.

...

> +config MMC_SDHCI_NPCM

>  config MMC_SDHCI_IPROC

Perhaps after IPROC?

...

> @@ -97,6 +97,7 @@ obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32)       += sdhci-pic32.o
>  obj-$(CONFIG_MMC_SDHCI_BRCMSTB)                += sdhci-brcmstb.o
>  obj-$(CONFIG_MMC_SDHCI_OMAP)           += sdhci-omap.o
>  obj-$(CONFIG_MMC_SDHCI_SPRD)           += sdhci-sprd.o
> +obj-$(CONFIG_MMC_SDHCI_NPCM)           += sdhci-npcm.o

Perhaps after IPROC? (There is a group of platform drivers slightly
below than here)

>  obj-$(CONFIG_MMC_CQHCI)                        += cqhci.o

...

> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/mmc/host.h>
> +#include <linux/mmc/mmc.h>
> +#include <linux/module.h>

I guess platform_device.h is missing here.

...

> +static int npcm_sdhci_probe(struct platform_device *pdev)
> +{
> +       struct sdhci_pltfm_host *pltfm_host;
> +       struct sdhci_host *host;
> +       u32 caps;
> +       int ret;
> +
> +       host = sdhci_pltfm_init(pdev, &npcm_sdhci_pdata, 0);
> +       if (IS_ERR(host))
> +               return PTR_ERR(host);
> +
> +       pltfm_host = sdhci_priv(host);

> +       pltfm_host->clk = devm_clk_get_optional(&pdev->dev, NULL);

You can't mix devm with non-devm in this way.

> +       if (IS_ERR(pltfm_host->clk))
> +               return PTR_ERR(pltfm_host->clk);
> +
> +       ret = clk_prepare_enable(pltfm_host->clk);
> +       if (ret)
> +               return ret;
> +
> +       caps = sdhci_readl(host, SDHCI_CAPABILITIES);
> +       if (caps & SDHCI_CAN_DO_8BIT)
> +               host->mmc->caps |= MMC_CAP_8_BIT_DATA;
> +
> +       ret = mmc_of_parse(host->mmc);
> +       if (ret)
> +               goto err_sdhci_add;
> +
> +       ret = sdhci_add_host(host);
> +       if (ret)
> +               goto err_sdhci_add;

Why can't you use sdhci_pltfm_register()?

> +       return 0;
> +
> +err_sdhci_add:
> +       clk_disable_unprepare(pltfm_host->clk);
> +       sdhci_pltfm_free(pdev);
> +       return ret;
> +}

Missing ->remove() due to above.

Have you tried to compile as a module and then remove and insert it
several times?

-- 
With Best Regards,
Andy Shevchenko