Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Robert Foss <robert.foss@linaro.org>
To:     robdclark@gmail.com, quic_abhinavk@quicinc.com,
        dmitry.baryshkov@linaro.org, sean@poorly.run, airlied@linux.ie,
        daniel@ffwll.ch, robh+dt@kernel.org,
        krzysztof.kozlowski+dt@linaro.org, agross@kernel.org,
        bjorn.andersson@linaro.org, konrad.dybcio@somainline.org,
        quic_kalyant@quicinc.com, angelogioacchino.delregno@somainline.org,
        robert.foss@linaro.org, loic.poulain@linaro.org,
        swboyd@chromium.org, quic_vpolimer@quicinc.com, vkoul@kernel.org,
        dianders@chromium.org, linux-arm-msm@vger.kernel.org,
        dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
        Jonathan Marek <jonathan@marek.ca>, vinod.koul@linaro.org,
        quic_jesszhan@quicinc.com, andersson@kernel.org
Subject: [PATCH v3 10/11] arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes
Date:   Mon,  5 Dec 2022 17:37:53 +0100
Message-Id: <20221205163754.221139-11-robert.foss@linaro.org>
In-Reply-To: <20221205163754.221139-1-robert.foss@linaro.org>
References: <20221205163754.221139-1-robert.foss@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

Enable the display subsystem and the dsi0 output for
the sm8350-hdk board.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index e6deb08c6da0..39462c659c58 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -213,10 +213,32 @@ &cdsp {
 	firmware-name = "qcom/sm8350/cdsp.mbn";
 };
 
+&dispcc {
+	status = "okay";
+};
+
+&dsi0 {
+	vdda-supply = <&vreg_l6b_1p2>;
+	status = "okay";
+};
+
+&dsi0_phy  {
+	vdds-supply = <&vreg_l5b_0p88>;
+	status = "okay";
+};
+
 &gpi_dma1 {
 	status = "okay";
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_mdp {
+	status = "okay";
+};
+
 &mpss {
 	status = "okay";
 	firmware-name = "qcom/sm8350/modem.mbn";
-- 
2.34.1