Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Mon, 5 Dec 2022 18:18:44 +0100
From:   Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
To:     Andrew Lunn <andrew@lunn.ch>,
        Heiner Kallweit <hkallweit1@gmail.com>,
        Russell King <linux@armlinux.org.uk>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>
Cc:     linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
        Oleksij Rempel <o.rempel@pengutronix.de>
Subject: [PATCH v3 net-next 3/4] drivers/net/phy: add connection between
 ethtool and phylib for PLCA
Message-ID: <30e223d2d6d6e8aa1aaf7fbc492127164402af17.1670259123.git.piergiorgio.beruto@gmail.com>
References: <d53ffecdde8d3950a24155228a3439f2c9b10b9b.1670259123.git.piergiorgio.beruto@gmail.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <d53ffecdde8d3950a24155228a3439f2c9b10b9b.1670259123.git.piergiorgio.beruto@gmail.com>
Precedence: bulk

This patch adds the required connection between netlink ethtool and
phylib to resolve PLCA get/set config and get status messages.

Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
---
 drivers/net/phy/phy.c | 163 +++++++++++++++++++++++++++++++++++++++---
 include/linux/phy.h   |  17 ++++-
 2 files changed, 168 insertions(+), 12 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 99e3497b6aa1..6bea928e405b 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -544,36 +544,181 @@ int phy_ethtool_get_stats(struct phy_device *phydev,
 EXPORT_SYMBOL(phy_ethtool_get_stats);
 
 /**
+ * phy_ethtool_get_plca_cfg - Get PLCA RS configuration
  *
+ * @phydev: the phy_device struct
+ * @plca_cfg: where to store the retrieved configuration
  */
-int phy_ethtool_get_plca_cfg(struct phy_device *dev,
+int phy_ethtool_get_plca_cfg(struct phy_device *phydev,
 			     struct phy_plca_cfg *plca_cfg)
 {
-	// TODO
-	return 0;
+	int ret;
+
+	if (!phydev->drv) {
+		ret = -EIO;
+		goto out;
+	}
+
+	if (!phydev->drv->get_plca_cfg) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	memset(plca_cfg, 0xFF, sizeof(*plca_cfg));
+
+	mutex_lock(&phydev->lock);
+	ret = phydev->drv->get_plca_cfg(phydev, plca_cfg);
+
+	if (ret)
+		goto out_drv;
+
+out_drv:
+	mutex_unlock(&phydev->lock);
+out:
+	return ret;
 }
 EXPORT_SYMBOL(phy_ethtool_get_plca_cfg);
 
 /**
+ * phy_ethtool_set_plca_cfg - Set PLCA RS configuration
  *
+ * @phydev: the phy_device struct
+ * @extack: extack for reporting useful error messages
+ * @plca_cfg: new PLCA configuration to apply
  */
-int phy_ethtool_set_plca_cfg(struct phy_device *dev,
+int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
 			     struct netlink_ext_ack *extack,
 			     const struct phy_plca_cfg *plca_cfg)
 {
-	// TODO
-	return 0;
+	int ret;
+	struct phy_plca_cfg *curr_plca_cfg = 0;
+
+	if (!phydev->drv) {
+		ret = -EIO;
+		goto out;
+	}
+
+	if (!phydev->drv->set_plca_cfg ||
+	    !phydev->drv->get_plca_cfg) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	curr_plca_cfg = kmalloc(sizeof(*curr_plca_cfg), GFP_KERNEL);
+	memset(curr_plca_cfg, 0xFF, sizeof(*curr_plca_cfg));
+
+	mutex_lock(&phydev->lock);
+
+	ret = phydev->drv->get_plca_cfg(phydev, curr_plca_cfg);
+	if (ret)
+		goto out_drv;
+
+	if (curr_plca_cfg->enabled < 0 && plca_cfg->enabled >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'enable' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->node_id < 0 && plca_cfg->node_id >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'local node ID' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->node_cnt < 0 && plca_cfg->node_cnt >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'node count' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->to_tmr < 0 && plca_cfg->to_tmr >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'TO timer' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->burst_cnt < 0 && plca_cfg->burst_cnt >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'burst count' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	if (curr_plca_cfg->burst_tmr < 0 && plca_cfg->burst_tmr >= 0) {
+		NL_SET_ERR_MSG(extack,
+			       "PHY does not support changing the PLCA 'burst timer' attribute");
+		ret = -EINVAL;
+		goto out_drv;
+	}
+
+	// if enabling PLCA, perform additional sanity checks
+	if (plca_cfg->enabled > 0) {
+		if (!linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT,
+				       phydev->advertising)) {
+			ret = -EOPNOTSUPP;
+			NL_SET_ERR_MSG(extack,
+				       "Point to Multi-Point mode is not enabled");
+		}
+
+		// allow setting node_id concurrently with enabled
+		if (plca_cfg->node_id >= 0)
+			curr_plca_cfg->node_id = plca_cfg->node_id;
+
+		if (curr_plca_cfg->node_id >= 255) {
+			NL_SET_ERR_MSG(extack, "PLCA node ID is not set");
+			ret = -EINVAL;
+			goto out_drv;
+		}
+	}
+
+	ret = phydev->drv->set_plca_cfg(phydev, plca_cfg);
+	if (ret)
+		goto out_drv;
+
+out_drv:
+	kfree(curr_plca_cfg);
+	mutex_unlock(&phydev->lock);
+out:
+	return ret;
+
 }
 EXPORT_SYMBOL(phy_ethtool_set_plca_cfg);
 
 /**
+ * phy_ethtool_get_plca_status - Get PLCA RS status information
  *
+ * @phydev: the phy_device struct
+ * @plca_st: where to store the retrieved status information
  */
-int phy_ethtool_get_plca_status(struct phy_device *dev,
+int phy_ethtool_get_plca_status(struct phy_device *phydev,
 				struct phy_plca_status *plca_st)
 {
-	// TODO
-	return 0;
+	int ret;
+
+	if (!phydev->drv) {
+		ret = -EIO;
+		goto out;
+	}
+
+	if (!phydev->drv->get_plca_status) {
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	mutex_lock(&phydev->lock);
+	ret = phydev->drv->get_plca_status(phydev, plca_st);
+
+	if (ret)
+		goto out_drv;
+
+out_drv:
+	mutex_unlock(&phydev->lock);
+out:
+	return ret;
 }
 EXPORT_SYMBOL(phy_ethtool_get_plca_status);
 
diff --git a/include/linux/phy.h b/include/linux/phy.h
index ab2c134d0a05..49d0488bf480 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1036,6 +1036,17 @@ struct phy_driver {
 	int (*get_sqi)(struct phy_device *dev);
 	/** @get_sqi_max: Get the maximum signal quality indication */
 	int (*get_sqi_max)(struct phy_device *dev);
+
+	/* PLCA RS interface */
+	/** @get_plca_cfg: Return the current PLCA configuration */
+	int (*get_plca_cfg)(struct phy_device *dev,
+			    struct phy_plca_cfg *plca_cfg);
+	/** @set_plca_cfg: Set the PLCA configuration */
+	int (*set_plca_cfg)(struct phy_device *dev,
+			    const struct phy_plca_cfg *plca_cfg);
+	/** @get_plca_status: Return the current PLCA status info */
+	int (*get_plca_status)(struct phy_device *dev,
+			       struct phy_plca_status *plca_st);
 };
 #define to_phy_driver(d) container_of(to_mdio_common_driver(d),		\
 				      struct phy_driver, mdiodrv)
@@ -1832,12 +1843,12 @@ int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data);
 int phy_ethtool_get_sset_count(struct phy_device *phydev);
 int phy_ethtool_get_stats(struct phy_device *phydev,
 			  struct ethtool_stats *stats, u64 *data);
-int phy_ethtool_get_plca_cfg(struct phy_device *dev,
+int phy_ethtool_get_plca_cfg(struct phy_device *phydev,
 			     struct phy_plca_cfg *plca_cfg);
-int phy_ethtool_set_plca_cfg(struct phy_device *dev,
+int phy_ethtool_set_plca_cfg(struct phy_device *phydev,
 			     struct netlink_ext_ack *extack,
 			     const struct phy_plca_cfg *plca_cfg);
-int phy_ethtool_get_plca_status(struct phy_device *dev,
+int phy_ethtool_get_plca_status(struct phy_device *phydev,
 				struct phy_plca_status *plca_st);
 
 static inline int phy_package_read(struct phy_device *phydev, u32 regnum)
-- 
2.35.1