Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Jerry Ray <jerry.ray@microchip.com>
To:     Andrew Lunn <andrew@lunn.ch>,
        Florian Fainelli <f.fainelli@gmail.com>,
        Vladimir Oltean <olteanv@gmail.com>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        "Paolo Abeni" <pabeni@redhat.com>, <netdev@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <linux@armlinux.org.uk>,
        Jerry Ray <jerry.ray@microchip.com>
Subject: [PATCH net-next v3 0/2] dsa: lan9303: Move to PHYLINK
Date:   Tue, 6 Dec 2022 12:34:58 -0600
Message-ID: <20221206183500.6898-1-jerry.ray@microchip.com>
MIME-Version: 1.0
Content-Type: text/plain
Precedence: bulk

This patch series moves the lan9303 driver to use the phylink
api away from phylib.

1) adds port_max_mtu api support.
2) Replace .adjust_link with .phylink_get_caps dsa api

Clearing the Turbo Mode bit previously done in the adjust_link
API is moved to the driver initialization immediately following
the successful detection of a LAN93xx device.  It is forced to a
disabled state and never enabled.

At this point, I do not see anything this driver needs from the other
phylink APIs.

Signed-off-by: Jerry Ray <jerry.ray@microchip.com>

---
v2-> v3:
  Added back in disabling Turbo Mode on the CPU MII interface.
  Removed the unnecessary clearing of the phyvsupported interfaces.
v1-> v2:
  corrected the reported mtu size, removing ETH_HLEN and ETH_FCS_LEN

 drivers/net/dsa/lan9303-core.c | 93 ++++++++++++--------
 1 file changed, 56 insertions(+), 37 deletions(-)