Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Tue, 6 Dec 2022 19:10:50 +0100
From:   Piergiorgio Beruto <piergiorgio.beruto@gmail.com>
To:     Andrew Lunn <andrew@lunn.ch>
Cc:     Heiner Kallweit <hkallweit1@gmail.com>,
        Russell King <linux@armlinux.org.uk>,
        "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>, linux-kernel@vger.kernel.org,
        netdev@vger.kernel.org, Oleksij Rempel <o.rempel@pengutronix.de>
Subject: Re: [PATCH v4 net-next 5/5] drivers/net/phy: add driver for the
 onsemi NCN26000 10BASE-T1S PHY
Message-ID: <Y4+FqsZLBzDzadcC@gvm01>
References: <cover.1670329232.git.piergiorgio.beruto@gmail.com>
 <1816cb14213fc2050b1a7e97a68be7186340d994.1670329232.git.piergiorgio.beruto@gmail.com>
 <Y49IBR8ByMQH6oVt@lunn.ch>
 <Y49THkXZdLBR6Mxv@gvm01>
 <Y49yxcd6m7K3G3ZA@lunn.ch>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <Y49yxcd6m7K3G3ZA@lunn.ch>
Precedence: bulk

On Tue, Dec 06, 2022 at 05:50:13PM +0100, Andrew Lunn wrote:
> > OK, as you see I'm a bit "outdated" :-)
> > What would be the alternative? There is a bunch of vendor-specific PHY
> > features that I would like to expose at some point (e.g. regulation of
> > TX voltage levels). Thanks!
> 
> TX voltages sound like they are board specific, so use DT properties.
> 
> For runtime properties, look at phy tunables.
Ok, but as far as I understand tunables, these need to be "generalized".
I was wondering if there is some interface (sysfs / proc / other) to set
parameters which are very specific to a PHY implementation?

Thanks,
Piergiorgio