Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   MD Danish Anwar <danishanwar@ti.com>
To:     Mathieu Poirier <mathieu.poirier@linaro.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Rob Herring <robh+dt@kernel.org>
CC:     Suman Anna <s-anna@ti.com>, Roger Quadros <rogerq@kernel.org>,
        "Andrew F . Davis" <afd@ti.com>, <nm@ti.com>, <vigneshr@ti.com>,
        <srk@ti.com>, <linux-remoteproc@vger.kernel.org>,
        <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        MD Danish Anwar <danishanwar@ti.com>
Subject: [PATCH v11 2/6] remoteproc: pru: Add enum for PRU Core Identifiers.
Date:   Wed, 7 Dec 2022 16:34:07 +0530
Message-ID: <20221207110411.441692-3-danishanwar@ti.com>
In-Reply-To: <20221207110411.441692-1-danishanwar@ti.com>
References: <20221207110411.441692-1-danishanwar@ti.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
Precedence: bulk

Introducing enum pruss_pru_id for PRU Core Identifiers.
PRUSS_PRU0 indicates PRU Core 0.
PRUSS_PRU1 indicates PRU Core 1.
PRUSS_NUM_PRUS indicates the total number of PRU Cores.

Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
---
 drivers/remoteproc/pru_rproc.c |  7 ++++---
 include/linux/pruss.h          | 32 ++++++++++++++++++++++++++++++++
 2 files changed, 36 insertions(+), 3 deletions(-)
 create mode 100644 include/linux/pruss.h

diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
index 128bf9912f2c..a1a208b31846 100644
--- a/drivers/remoteproc/pru_rproc.c
+++ b/drivers/remoteproc/pru_rproc.c
@@ -16,6 +16,7 @@
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/of_irq.h>
+#include <linux/pruss.h>
 #include <linux/pruss_driver.h>
 #include <linux/remoteproc.h>
 
@@ -438,7 +439,7 @@ static void *pru_d_da_to_va(struct pru_rproc *pru, u32 da, size_t len)
 	dram0 = pruss->mem_regions[PRUSS_MEM_DRAM0];
 	dram1 = pruss->mem_regions[PRUSS_MEM_DRAM1];
 	/* PRU1 has its local RAM addresses reversed */
-	if (pru->id == 1)
+	if (pru->id == PRUSS_PRU1)
 		swap(dram0, dram1);
 	shrd_ram = pruss->mem_regions[PRUSS_MEM_SHRD_RAM2];
 
@@ -747,14 +748,14 @@ static int pru_rproc_set_id(struct pru_rproc *pru)
 	case RTU0_IRAM_ADDR_MASK:
 		fallthrough;
 	case PRU0_IRAM_ADDR_MASK:
-		pru->id = 0;
+		pru->id = PRUSS_PRU0;
 		break;
 	case TX_PRU1_IRAM_ADDR_MASK:
 		fallthrough;
 	case RTU1_IRAM_ADDR_MASK:
 		fallthrough;
 	case PRU1_IRAM_ADDR_MASK:
-		pru->id = 1;
+		pru->id = PRUSS_PRU1;
 		break;
 	default:
 		ret = -EINVAL;
diff --git a/include/linux/pruss.h b/include/linux/pruss.h
new file mode 100644
index 000000000000..fbe4fbb45807
--- /dev/null
+++ b/include/linux/pruss.h
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/**
+ * PRU-ICSS Subsystem user interfaces
+ *
+ * Copyright (C) 2015-2022 Texas Instruments Incorporated - http://www.ti.com
+ *	Suman Anna <s-anna@ti.com>
+ */
+
+#ifndef __LINUX_PRUSS_H
+#define __LINUX_PRUSS_H
+
+#include <linux/device.h>
+#include <linux/types.h>
+
+#define PRU_RPROC_DRVNAME "pru-rproc"
+
+/**
+ * enum pruss_pru_id - PRU core identifiers
+ * @PRUSS_PRU0: PRU Core 0.
+ * @PRUSS_PRU1: PRU Core 1.
+ * @PRUSS_NUM_PRUS: Total number of PRU Cores available.
+ *
+ */
+
+enum pruss_pru_id {
+	PRUSS_PRU0 = 0,
+	PRUSS_PRU1,
+	PRUSS_NUM_PRUS,
+};
+
+
+#endif /* __LINUX_PRUSS_H */
\ No newline at end of file
-- 
2.25.1