Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S935902AbXHNDyB (ORCPT ); Mon, 13 Aug 2007 23:54:01 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1758858AbXHNDxp (ORCPT ); Mon, 13 Aug 2007 23:53:45 -0400 Received: from smtp.hickorytech.net ([216.114.192.16]:47636 "EHLO avalanche.hickorytech.net" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1757417AbXHNDxk (ORCPT ); Mon, 13 Aug 2007 23:53:40 -0400 X-Greylist: delayed 1859 seconds by postgrey-1.27 at vger.kernel.org; Mon, 13 Aug 2007 23:53:39 EDT Message-ID: <46C11FFD.4040607@mnsu.edu> Date: Mon, 13 Aug 2007 22:22:37 -0500 From: Jeffrey Hundstad User-Agent: Mozilla-Thunderbird 2.0.0.4 (X11/20070622) MIME-Version: 1.0 To: LKML Subject: "pci=routeirq" on IBM Thinkpad A20m Type 2628-3au fixes wireless card in cardbus/pcmcia slot Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19738 Lines: 461 pci=routeirq makes my wireless lan card in a cardbus/pcmcia slot work. I'm posting these are requested in the dmesg. (below are lspci and dmesg, more available by request) Here's the lspci: 00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) Flags: bus master, medium devsel, latency 64 Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: [a0] AGP version 1.0 00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 128 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00002000-00002fff Memory behind bridge: f4200000-f5ffffff Prefetchable memory behind bridge: 30000000-300fffff 00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03) Subsystem: IBM Thinkpad T20/T22/A21m Flags: bus master, medium devsel, latency 168, IRQ 5 Memory at 50000000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=02, subordinate=05, sec-latency=176 Memory window 0: 20000000-23fff000 (prefetchable) Memory window 1: 24000000-27fff000 I/O window 0: 00001400-000014ff I/O window 1: 00001c00-00001cff 16-bit legacy interface ports at 0001 00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03) Subsystem: IBM Thinkpad T20/T22/A21m Flags: bus master, medium devsel, latency 168, IRQ 9 Memory at 50100000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=06, subordinate=09, sec-latency=176 Memory window 0: 28000000-2bfff000 (prefetchable) Memory window 1: 2c000000-2ffff000 I/O window 0: 00003000-000030ff I/O window 1: 00003400-000034ff 16-bit legacy interface ports at 0001 00:03.0 Ethernet controller: Intel Corporation 82557/8/9 Ethernet Pro 100 (rev 09) Subsystem: Intel Corporation EtherExpress PRO/100+ MiniPCI Flags: bus master, medium devsel, latency 66, IRQ 10 Memory at f4120000 (32-bit, non-prefetchable) [size=4K] I/O ports at 1800 [size=64] Memory at f4100000 (32-bit, non-prefetchable) [size=128K] [virtual] Expansion ROM at 30100000 [disabled] [size=1M] Capabilities: [dc] Power Management version 2 00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem (prog-if 02 [16550]) Subsystem: Intel Corporation Unknown device 2408 Flags: medium devsel, IRQ 10 I/O ports at 1840 [size=8] Memory at f4121000 (32-bit, non-prefetchable) [size=4K] Capabilities: [dc] Power Management version 2 00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01) Subsystem: IBM ThinkPad A20m Flags: bus master, slow devsel, latency 64, IRQ 5 Memory at f4122000 (32-bit, non-prefetchable) [size=4K] Memory at f4000000 (32-bit, non-prefetchable) [size=1M] Capabilities: [40] Power Management version 2 00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02) Flags: bus master, medium devsel, latency 0 00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master]) Flags: bus master, medium devsel, latency 64 [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] I/O ports at 1850 [size=16] 00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI]) Flags: bus master, medium devsel, latency 64, IRQ 11 I/O ports at 1860 [size=32] 00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03) Flags: medium devsel, IRQ 9 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M AGP 2x (rev 64) (prog-if 00 [VGA]) Subsystem: IBM ThinkPad A20m/A21m Flags: bus master, stepping, medium devsel, latency 66, IRQ 5 Memory at f5000000 (32-bit, non-prefetchable) [size=16M] I/O ports at 2000 [size=256] Memory at f4200000 (32-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at 30000000 [disabled] [size=128K] Capabilities: [50] AGP version 1.0 Capabilities: [5c] Power Management version 2 dmesg: Linux version 2.6.22-1-686 (Debian 2.6.22-3) (waldi@debian.org) (gcc version 4.1.3 20070718 (prerelease) (Debian 4.1.2-14)) #1 SMP Sun Jul 29 14:37:42 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000013ff0000 (usable) BIOS-e820: 0000000013ff0000 - 0000000013ffec00 (ACPI data) BIOS-e820: 0000000013ffec00 - 0000000014000000 (ACPI NVS) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 319MB LOWMEM available. Entering add_active_range(0, 0, 81904) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 81904 HighMem 81904 -> 81904 early_node_map[1] active PFN ranges 0: 0 -> 81904 On node 0 totalpages: 81904 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 607 pages used for memmap Normal zone: 77201 pages, LIFO batch:15 HighMem zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000F6B30, 0014 (r0 PTLTD ) ACPI: RSDT 13FF596D, 002C (r1 PTLTD RSDT 6041130 LTP 0) ACPI: FACP 13FFEB65, 0074 (r1 IBM TP-A20M 6041130 0) ACPI: DSDT 13FF5999, 91CC (r1 IBM TP A20m 6041130 MSFT 100000C) ACPI: FACS 13FFF000, 0040 ACPI: BOOT 13FFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6041130 LTP 1) ACPI: PM-Timer IO Port: 0x1008 Allocating PCI resources starting at 20000000 (gap: 14000000:ebf80000) Built 1 zonelists. Total pages: 81265 Kernel command line: root=/dev/hda3 ro pci=routeirq Local APIC disabled by BIOS -- you can enable it with "lapic" mapped APIC to ffffd000 (0128c000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 548.673 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 315784k/327616k available (1688k kernel code, 11248k reserved, 649k data, 244k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xd4800000 - 0xff7fe000 ( 687 MB) lowmem : 0xc0000000 - 0xd3ff0000 ( 319 MB) .init : 0xc034f000 - 0xc038c000 ( 244 kB) .data : 0xc02a6187 - 0xc03487e4 ( 649 kB) .text : 0xc0100000 - 0xc02a6187 (1688 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1098.47 BogoMIPS (lpj=2196950) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed ACPI: Core revision 20070126 ACPI: setting ELCR to 0200 (from 0e20) CPU0: Intel Celeron (Coppermine) stepping 03 SMP motherboard not detected. Local APIC not detected. Using dummy APIC emulation. Brought up 1 CPUs Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Firmware left 0000:00:03.0 e100 interrupts enabled, disabling PCI quirk: region 1000-103f claimed by PIIX4 ACPI PCI quirk: region 1040-104f claimed by PIIX4 SMB PIIX4 devres C PIO at 15e8-15ef PIIX4 devres I PIO at 03f0-03f7 PIIX4 devres J PIO at 002e-002f ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PSER] (on) ACPI: Power Resource [PSIO] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5 PCI: setting IRQ 5 as level-triggered ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9 PCI: setting IRQ 9 as level-triggered ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5 NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: RTC can wake from S4 pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved pnp: 00:02: ioport range 0x1000-0x103f has been reserved pnp: 00:02: ioport range 0x1040-0x104f has been reserved pnp: 00:02: ioport range 0xfe00-0xfe0f has been reserved pnp: 00:09: ioport range 0x15e0-0x15ef has been reserved Time: tsc clocksource has been installed. PCI: Bridge: 0000:00:01.0 IO window: 2000-2fff MEM window: f4200000-f5ffffff PREFETCH window: 30000000-300fffff PCI: Bus 2, cardbus bridge: 0000:00:02.0 IO window: 00001400-000014ff IO window: 00001c00-00001cff PREFETCH window: 20000000-23ffffff MEM window: 24000000-27ffffff PCI: Bus 6, cardbus bridge: 0000:00:02.1 IO window: 00003000-000030ff IO window: 00003400-000034ff PREFETCH window: 28000000-2bffffff MEM window: 2c000000-2fffffff ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 196608 bytes) TCP bind hash table entries: 16384 (order: 5, 131072 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 5303k freed Simple Boot Flag at 0x35 set to 0x1 audit: initializing netlink socket (disabled) audit(1187042830.816:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Limiting direct PCI/PCI transfers. Boot video device is 0000:01:00.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 244k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (65 C) e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10 e100: eth0: e100_probe: addr 0xf4120000, irq 10, MAC addr 00:10:A4:8F:2A:03 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 0000:00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1850-0x1857, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1858-0x185f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 hda: FUJITSU MHT2040AH, ATA DISK drive Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Marking TSC unstable due to: possible TSC halt in C2. Time: acpi_pm clocksource has been installed. Clocksource tsc unstable (delta = -3678234910 ns) hda: selected mode 0x42 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: CRN-8241U, ATAPI CD/DVD-ROM drive hdc: selected mode 0x42 ide1 at 0x170-0x177,0x376 on irq 15 ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:07.2: UHCI Host Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: irq 11, io base 0x00001860 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected SCSI subsystem initialized libata version 2.21 loaded. hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33) hda: cache flushes supported hda: hda1 hda2 hda3 SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem hda3 Ending clean XFS mount for filesystem: hda3 Linux agpgart interface v0.102 (c) Dave Jones Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66 Yenta: ISA IRQ mask 0x0090, PCI irq 5 Socket status: 30000010 Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66 Yenta: ISA IRQ mask 0x0090, PCI irq 9 Socket status: 30000006 agpgart: Detected an Intel 440BX Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 pccard: PCMCIA card inserted into slot 0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module! piix4_smbus: probe of 0000:00:07.3 failed with error -1 Real Time Clock Driver v1.12ac input: PC Speaker as /class/input/input1 irda_init() NET: Registered protocol family 23 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input2 parport_pc 00:0d: reported by Plug and Play ACPI parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] cs: IO port probe 0x100-0x3af: excluding 0x2f8-0x2ff cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. cs: memory probe 0xa0000000-0xa0ffffff: clean. pcmcia: registering new device pcmcia0.0 cs: IO port probe 0x100-0x3af: excluding 0x2f8-0x2ff cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x820-0x8ff: clean. cs: IO port probe 0xc00-0xcf7: clean. cs: IO port probe 0xa00-0xaff: clean. nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 3. nsc-ircc, chip->init nsc-ircc, Found chip at base=0x02e nsc-ircc, driver loaded (Dag Brattli) IrDA: Registered device irda0 nsc-ircc, Found dongle: Reserved nsc_ircc_init_dongle_interface(), Reserved not defined by irda yet ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5 cs46xx: failure waiting for FIFO command to complete orinoco 0.15 (David Gibson , Pavel Roskin , et al) orinoco_cs 0.15 (David Gibson , Pavel Roskin , et al) eth1: Hardware identity 0001:0001:0004:0000 eth1: Station identity 001f:0001:0008:0048 eth1: Firmware determined as Lucent/Agere 8.72 eth1: Ad-hoc demo mode supported eth1: IEEE standard IBSS ad-hoc mode supported eth1: WEP supported, 104-bit key eth1: MAC address 00:60:1D:23:D3:1D eth1: Station name "HERMES I" eth1: ready eth1: orinoco_cs at 0.0, irq 4, io 0x0100-0x013f gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1704kHz Adding 695512k swap on /dev/hda2. Priority:-1 extents:1 across:695512k device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com pcmcia: Detected deprecated PCMCIA ioctl usage from process: discover. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. eth1: New link status: Connected (0001) NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready IA-32 Microcode Update Driver: v1.14a ACPI: Battery Slot [BAT0] (battery present) ACPI: AC Adapter [AC] (on-line) input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input4 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input5 ACPI: Sleep Button (CM) [SLPB] nbd: registered device at major 43 eth1: no IPv6 routers present powernow: This module only works with AMD K7 CPUs - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/