Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <f2aaf9bd-e65b-08c7-5eae-7fac59324791@kernel.org>
Date:   Thu, 8 Dec 2022 12:22:17 +0200
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.4.2
Subject: Re: [PATCH v11 2/6] remoteproc: pru: Add enum for PRU Core
 Identifiers.
Content-Language: en-US
To:     MD Danish Anwar <danishanwar@ti.com>,
        Mathieu Poirier <mathieu.poirier@linaro.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Rob Herring <robh+dt@kernel.org>
Cc:     Suman Anna <s-anna@ti.com>, "Andrew F . Davis" <afd@ti.com>,
        nm@ti.com, vigneshr@ti.com, srk@ti.com,
        linux-remoteproc@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org
References: <20221207110411.441692-1-danishanwar@ti.com>
 <20221207110411.441692-3-danishanwar@ti.com>
From:   Roger Quadros <rogerq@kernel.org>
In-Reply-To: <20221207110411.441692-3-danishanwar@ti.com>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk


On 07/12/2022 13:04, MD Danish Anwar wrote:
> Introducing enum pruss_pru_id for PRU Core Identifiers.
> PRUSS_PRU0 indicates PRU Core 0.
> PRUSS_PRU1 indicates PRU Core 1.
> PRUSS_NUM_PRUS indicates the total number of PRU Cores.
> 
> Signed-off-by: MD Danish Anwar <danishanwar@ti.com>

Reviewed-by: Roger Quadros <rogerq@kernel.org>

--
cheers,
-roger

> ---
>  drivers/remoteproc/pru_rproc.c |  7 ++++---
>  include/linux/pruss.h          | 32 ++++++++++++++++++++++++++++++++
>  2 files changed, 36 insertions(+), 3 deletions(-)
>  create mode 100644 include/linux/pruss.h
> 
> diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c
> index 128bf9912f2c..a1a208b31846 100644
> --- a/drivers/remoteproc/pru_rproc.c
> +++ b/drivers/remoteproc/pru_rproc.c
> @@ -16,6 +16,7 @@
>  #include <linux/module.h>
>  #include <linux/of_device.h>
>  #include <linux/of_irq.h>
> +#include <linux/pruss.h>
>  #include <linux/pruss_driver.h>
>  #include <linux/remoteproc.h>
>  
> @@ -438,7 +439,7 @@ static void *pru_d_da_to_va(struct pru_rproc *pru, u32 da, size_t len)
>  	dram0 = pruss->mem_regions[PRUSS_MEM_DRAM0];
>  	dram1 = pruss->mem_regions[PRUSS_MEM_DRAM1];
>  	/* PRU1 has its local RAM addresses reversed */
> -	if (pru->id == 1)
> +	if (pru->id == PRUSS_PRU1)
>  		swap(dram0, dram1);
>  	shrd_ram = pruss->mem_regions[PRUSS_MEM_SHRD_RAM2];
>  
> @@ -747,14 +748,14 @@ static int pru_rproc_set_id(struct pru_rproc *pru)
>  	case RTU0_IRAM_ADDR_MASK:
>  		fallthrough;
>  	case PRU0_IRAM_ADDR_MASK:
> -		pru->id = 0;
> +		pru->id = PRUSS_PRU0;
>  		break;
>  	case TX_PRU1_IRAM_ADDR_MASK:
>  		fallthrough;
>  	case RTU1_IRAM_ADDR_MASK:
>  		fallthrough;
>  	case PRU1_IRAM_ADDR_MASK:
> -		pru->id = 1;
> +		pru->id = PRUSS_PRU1;
>  		break;
>  	default:
>  		ret = -EINVAL;
> diff --git a/include/linux/pruss.h b/include/linux/pruss.h
> new file mode 100644
> index 000000000000..fbe4fbb45807
> --- /dev/null
> +++ b/include/linux/pruss.h
> @@ -0,0 +1,32 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/**
> + * PRU-ICSS Subsystem user interfaces
> + *
> + * Copyright (C) 2015-2022 Texas Instruments Incorporated - http://www.ti.com
> + *	Suman Anna <s-anna@ti.com>
> + */
> +
> +#ifndef __LINUX_PRUSS_H
> +#define __LINUX_PRUSS_H
> +
> +#include <linux/device.h>
> +#include <linux/types.h>
> +
> +#define PRU_RPROC_DRVNAME "pru-rproc"
> +
> +/**
> + * enum pruss_pru_id - PRU core identifiers
> + * @PRUSS_PRU0: PRU Core 0.
> + * @PRUSS_PRU1: PRU Core 1.
> + * @PRUSS_NUM_PRUS: Total number of PRU Cores available.
> + *
> + */
> +
> +enum pruss_pru_id {
> +	PRUSS_PRU0 = 0,
> +	PRUSS_PRU1,
> +	PRUSS_NUM_PRUS,
> +};
> +
> +
> +#endif /* __LINUX_PRUSS_H */
> \ No newline at end of file