Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Received-SPF: Pass (protection.outlook.com: domain of amd.com designates
 165.204.84.17 as permitted sender) receiver=protection.outlook.com;
 client-ip=165.204.84.17; helo=SATLEXMB04.amd.com; pr=C
From:   Tom Lendacky <thomas.lendacky@amd.com>
To:     <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
CC:     "David S. Miller" <davem@davemloft.net>,
        Eric Dumazet <edumazet@google.com>,
        Jakub Kicinski <kuba@kernel.org>,
        Paolo Abeni <pabeni@redhat.com>,
        Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Subject: [PATCH net 2/2] net: amd-xgbe: Check only the minimum speed for active/passive cables
Date:   Thu, 8 Dec 2022 10:22:25 -0600
Message-ID: <852265b14d35ee1e508b71d814f7532d12d5cf14.1670516545.git.thomas.lendacky@amd.com>
In-Reply-To: <cover.1670516545.git.thomas.lendacky@amd.com>
References: <cover.1670516545.git.thomas.lendacky@amd.com>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Content-Type: text/plain
X-MS-Exchange-CrossTenant-OriginalArrivalTime: 08 Dec 2022 16:25:47.1218
 (UTC)
X-MS-Exchange-CrossTenant-Network-Message-Id: 071a3503-8764-4bf2-b69b-08dad938dcc5
X-MS-Exchange-CrossTenant-Id: 3dd8961f-e488-4e60-8e11-a82d994e183d
X-MS-Exchange-CrossTenant-OriginalAttributedTenantConnectingIp: TenantId=3dd8961f-e488-4e60-8e11-a82d994e183d;Ip=[165.204.84.17];Helo=[SATLEXMB04.amd.com]
X-MS-Exchange-CrossTenant-AuthSource: BN8NAM11FT011.eop-nam11.prod.protection.outlook.com
X-MS-Exchange-CrossTenant-AuthAs: Anonymous
X-MS-Exchange-CrossTenant-FromEntityHeader: HybridOnPrem
X-MS-Exchange-Transport-CrossTenantHeadersStamped: CH0PR12MB5283
X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED,
        DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_NONE,
        RCVD_IN_MSPIKE_H2,SPF_HELO_PASS,SPF_PASS autolearn=ham
        autolearn_force=no version=3.4.6
X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on
        lindbergh.monkeyblade.net
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org

There are cables that exist that can support speeds in excess of 10GbE.
The driver, however, restricts the EEPROM advertised nominal bitrate to
a specific range, which can prevent usage of cables that can support,
for example, up to 25GbE.

Rather than checking that an active or passive cable supports a specific
range, only check for a minimum supported speed.

Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
---
 drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index 868a768f424c..c731a04731f8 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
@@ -237,10 +237,7 @@ enum xgbe_sfp_speed {
 
 #define XGBE_SFP_BASE_BR			12
 #define XGBE_SFP_BASE_BR_1GBE_MIN		0x0a
-#define XGBE_SFP_BASE_BR_1GBE_MAX		0x0d
 #define XGBE_SFP_BASE_BR_10GBE_MIN		0x64
-#define XGBE_SFP_BASE_BR_10GBE_MAX		0x68
-#define XGBE_MOLEX_SFP_BASE_BR_10GBE_MAX	0x78
 
 #define XGBE_SFP_BASE_CU_CABLE_LEN		18
 
@@ -827,29 +824,22 @@ static void xgbe_phy_sfp_phy_settings(struct xgbe_prv_data *pdata)
 static bool xgbe_phy_sfp_bit_rate(struct xgbe_sfp_eeprom *sfp_eeprom,
 				  enum xgbe_sfp_speed sfp_speed)
 {
-	u8 *sfp_base, min, max;
+	u8 *sfp_base, min;
 
 	sfp_base = sfp_eeprom->base;
 
 	switch (sfp_speed) {
 	case XGBE_SFP_SPEED_1000:
 		min = XGBE_SFP_BASE_BR_1GBE_MIN;
-		max = XGBE_SFP_BASE_BR_1GBE_MAX;
 		break;
 	case XGBE_SFP_SPEED_10000:
 		min = XGBE_SFP_BASE_BR_10GBE_MIN;
-		if (memcmp(&sfp_eeprom->base[XGBE_SFP_BASE_VENDOR_NAME],
-			   XGBE_MOLEX_VENDOR, XGBE_SFP_BASE_VENDOR_NAME_LEN) == 0)
-			max = XGBE_MOLEX_SFP_BASE_BR_10GBE_MAX;
-		else
-			max = XGBE_SFP_BASE_BR_10GBE_MAX;
 		break;
 	default:
 		return false;
 	}
 
-	return ((sfp_base[XGBE_SFP_BASE_BR] >= min) &&
-		(sfp_base[XGBE_SFP_BASE_BR] <= max));
+	return sfp_base[XGBE_SFP_BASE_BR] >= min;
 }
 
 static void xgbe_phy_free_phy_device(struct xgbe_prv_data *pdata)
-- 
2.38.1