Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v2 5/6] arm64: dts: qcom: sdm845: move sound node out of soc
Date:   Mon, 12 Dec 2022 11:02:31 +0100
Message-Id: <20221212100232.138519-5-krzysztof.kozlowski@linaro.org>
In-Reply-To: <20221212100232.138519-1-krzysztof.kozlowski@linaro.org>
References: <20221212100232.138519-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The sound node is not property of the soc, but rather board as it
describes the sound configuration.  It also does not have unit address:

  sdm845-shift-axolotl.dtb: soc@0: sound: {} should not be valid under {'type': 'object'}

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

---

Changes since v1:
1. Add Rb tag.
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 8eeb3aa261d5..5f1f7cb52c90 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -3964,9 +3964,6 @@ lmh_cluster0: lmh@17d78800 {
 			#interrupt-cells = <1>;
 		};
 
-		sound: sound {
-		};
-
 		usb_1_hsphy: phy@88e2000 {
 			compatible = "qcom,sdm845-qusb2-phy", "qcom,qusb2-v2-phy";
 			reg = <0 0x088e2000 0 0x400>;
@@ -5341,6 +5338,9 @@ wifi: wifi@18800000 {
 		};
 	};
 
+	sound: sound {
+	};
+
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-- 
2.34.1