Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Victor Shih <victorshihgli@gmail.com>
To:     ulf.hansson@linaro.org, adrian.hunter@intel.com
Cc:     linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
        benchuanggli@gmail.com, HL.Liu@genesyslogic.com.tw,
        Greg.tu@genesyslogic.com.tw, takahiro.akashi@linaro.org,
        dlunev@chromium.org, Victor Shih <victor.shih@genesyslogic.com.tw>,
        Ben Chuang <ben.chuang@genesyslogic.com.tw>
Subject: [PATCH V6 12/24] mmc: sdhci-uhs2: skip signal_voltage_switch()
Date:   Tue, 13 Dec 2022 17:00:35 +0800
Message-Id: <20221213090047.3805-13-victor.shih@genesyslogic.com.tw>
In-Reply-To: <20221213090047.3805-1-victor.shih@genesyslogic.com.tw>
References: <20221213090047.3805-1-victor.shih@genesyslogic.com.tw>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

For UHS2, the signal voltage is supplied by vdd2 which is already 1.8v,
so no voltage switch required.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
---
 drivers/mmc/host/sdhci-uhs2.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
index 780491781613..2342c05c4cdb 100644
--- a/drivers/mmc/host/sdhci-uhs2.c
+++ b/drivers/mmc/host/sdhci-uhs2.c
@@ -141,6 +141,27 @@ static void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode,
 	}
 }
 
+/*****************************************************************************\
+ *                                                                           *
+ * MMC callbacks                                                             *
+ *                                                                           *
+\*****************************************************************************/
+
+static int sdhci_uhs2_start_signal_voltage_switch(struct mmc_host *mmc,
+						  struct mmc_ios *ios)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+
+	/*
+	 * For UHS2, the signal voltage is supplied by vdd2 which is
+	 * already 1.8v so no voltage switch required.
+	 */
+	if (sdhci_uhs2_mode(host))
+		return 0;
+
+	return sdhci_start_signal_voltage_switch(mmc, ios);
+}
+
 /*****************************************************************************\
  *                                                                           *
  * Driver init/exit                                                          *
@@ -149,6 +170,9 @@ static void sdhci_uhs2_set_power(struct sdhci_host *host, unsigned char mode,
 
 static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
 {
+	host->mmc_host_ops.start_signal_voltage_switch =
+		sdhci_uhs2_start_signal_voltage_switch;
+
 	return 0;
 }
 
-- 
2.25.1