Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@linaro.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Stephen Boyd <swboyd@chromium.org>,
        Rajendra Nayak <rnayak@codeaurora.org>,
        Kiran Gunda <kgunda@codeaurora.org>
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
        linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
        linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/4] arm64: dts: qcom: sc7180: correct SPMI bus address cells
Date:   Tue, 13 Dec 2022 11:19:17 +0100
Message-Id: <20221213101921.47924-1-krzysztof.kozlowski@linaro.org>
MIME-Version: 1.0
Content-Transfer-Encoding: 8bit
Precedence: bulk

The SPMI bus uses two address cells and zero size cells (second reg
entry - SPMI_USID - is not the size):

  spmi@c440000: #address-cells:0:0: 2 was expected

Fixes: 0f9dc5f09fbd ("arm64: dts: qcom: sc7180: Add SPMI PMIC arbiter device")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>

---

Changes since v1:
1. secoond->second
2. Add tags
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index eb1e1ea12ff6..906fb9343bcc 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -3274,8 +3274,8 @@ spmi_bus: spmi@c440000 {
 			interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ee = <0>;
 			qcom,channel = <0>;
-			#address-cells = <1>;
-			#size-cells = <1>;
+			#address-cells = <2>;
+			#size-cells = <0>;
 			interrupt-controller;
 			#interrupt-cells = <4>;
 			cell-index = <0>;
-- 
2.34.1