Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Message-ID: <ea20c58f-3a53-7cdd-8669-228c4acac49a@linaro.org>
Date:   Wed, 14 Dec 2022 10:52:57 +0100
MIME-Version: 1.0
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101
 Thunderbird/102.5.1
Subject: Re: [PATCH 4/4] arm64: dts: qcom: sm6125: Initial support for
 xiaomi-laurel_sprout
Content-Language: en-US
To:     Lux Aliaga <they@mint.lgbt>
Cc:     Andy Gross <agross@kernel.org>,
        Bjorn Andersson <andersson@kernel.org>,
        Konrad Dybcio <konrad.dybcio@somainline.org>,
        Rob Herring <robh+dt@kernel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
        Kees Cook <keescook@chromium.org>,
        Anton Vorontsov <anton@enomsg.org>,
        Colin Cross <ccross@android.com>,
        Tony Luck <tony.luck@intel.com>, linux-arm-msm@vger.kernel.org,
        devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
References: <20221214093342.153479-1-they@mint.lgbt>
From:   Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
In-Reply-To: <20221214093342.153479-1-they@mint.lgbt>
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 7bit
Precedence: bulk

On 14/12/2022 10:33, Lux Aliaga wrote:
> This commit implements support for the Xiaomi Mi A3
> (xiaomi-laurel_sprout). Here's a summary on what's working.
> 
> - dmesg output to bootloader preconfigured display
> - USB
> - UFS
> - SMD RPM regulators
> 
> Signed-off-by: Lux Aliaga <they@mint.lgbt>
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../dts/qcom/sm6125-xiaomi-laurel_sprout.dts  | 251 ++++++++++++++++++
>  2 files changed, 252 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel_sprout.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index d7669a7cee9f..7b4fbb4cbb84 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -140,6 +140,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-shift-axolotl.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-samsung-w737.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-xiaomi-laurel_sprout.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm6350-sony-xperia-lena-pdx213.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm7225-fairphone-fp4.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-hdk.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel_sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel_sprout.dts
> new file mode 100644
> index 000000000000..edc5f13bae28
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel_sprout.dts
> @@ -0,0 +1,251 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022, Lux Aliaga <they@mint.lgbt>
> + */
> +
> +/dts-v1/;
> +
> +#include "sm6125.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/input/gpio-keys.h>
> +
> +/ {
> +	/* required for bootloader to select correct board */
> +	qcom,msm-id = <0x18a 0x00>; /* sm6125 v1 */
> +	qcom,board-id = <0x0b 0x00>;
> +
> +	model = "Xiaomi Mi A3";
> +	compatible = "xiaomi,laurel_sprout", "qcom,sm6125";
> +	chassis-type = "handset";
> +
> +	chosen {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		framebuffer0: framebuffer@5c000000 {
> +			compatible = "simple-framebuffer";
> +			reg = <0 0x5c000000 0 (1560 * 720 * 4)>;
> +			width = <720>;
> +			height = <1560>;
> +			stride = <(720 * 4)>;
> +			format = "a8r8g8b8";
> +		};
> +	};
> +
> +	extcon_usb: extcon-usb {

Node name: usb-id

> +		compatible = "linux,extcon-usb-gpio";
> +		id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	reserved_memory {

No underscores in node names. Use same node name as other boards, don't
invent own stuff.

> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		debug_mem: memory@ffb00000 {
> +			reg = <0x0 0xffb00000 0x0 0xc0000>;
> +			no-map;
> +		};
> +
> +		last_log_mem: memory@ffbc0000 {
> +			reg = <0x0 0xffbc0000 0x0 0x80000>;
> +			no-map;
> +		};
> +
> +		pstore_mem: ramoops@ffc00000 {
> +			compatible = "ramoops";
> +			reg = <0x0 0xffc40000 0x0 0xc0000>;
> +			record-size = <0x1000>;
> +			console-size = <0x40000>;
> +			msg-size = <0x20000 0x20000>;
> +		};
> +
> +		cmdline_mem: memory@ffd00000 {
> +			reg = <0x0 0xffd40000 0x0 0x1000>;
> +			no-map;
> +		};
> +	};
> +};
> +
> +&rpm_requests {
> +	regulators-0 {
> +		compatible = "qcom,rpm-pm6125-regulators";
> +
> +		vreg_s6a: s6 {
> +			regulator-min-microvolt = <936000>;
> +			regulator-max-microvolt = <1422000>;
> +		};
> +
> +		vreg_l1a: l1 {
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1256000>;
> +		};
> +
> +		vreg_l2a: l2 {
> +			regulator-min-microvolt = <1000000>;
> +			regulator-max-microvolt = <1056000>;
> +		};
> +
> +		vreg_l3a: l3 {
> +			regulator-min-microvolt = <1000000>;
> +			regulator-max-microvolt = <1064000>;
> +		};
> +
> +		vreg_l4a: l4 {
> +			regulator-min-microvolt = <872000>;
> +			regulator-max-microvolt = <976000>;
> +		};
> +
> +		vreg_l5a: l5 {
> +			regulator-min-microvolt = <1648000>;
> +			regulator-max-microvolt = <3104000>;
> +		};
> +
> +		vreg_l6a: l6 {
> +			regulator-min-microvolt = <576000>;
> +			regulator-max-microvolt = <656000>;
> +		};
> +
> +		vreg_l7a: l7 {
> +			regulator-min-microvolt = <872000>;
> +			regulator-max-microvolt = <976000>;
> +		};
> +
> +		vreg_l8a: l8 {
> +			regulator-min-microvolt = <400000>;
> +			regulator-max-microvolt = <728000>;
> +		};
> +
> +		vreg_l9a: l9 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1896000>;
> +		};
> +
> +		vreg_l10a: l10 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1896000>;
> +		};
> +
> +		vreg_l11a: l11 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1952000>;
> +		};
> +
> +		vreg_l12a: l12 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1996000>;
> +		};
> +
> +		vreg_l13a: l13 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1832000>;
> +		};
> +
> +		vreg_l14a: l14 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1904000>;
> +		};
> +
> +		vreg_l15a: l15 {
> +			regulator-min-microvolt = <3104000>;
> +			regulator-max-microvolt = <3232000>;
> +		};
> +
> +		vreg_l16a: l16 {
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1904000>;
> +		};
> +
> +		vreg_l17a: l17 {
> +			regulator-min-microvolt = <1248000>;
> +			regulator-max-microvolt = <1304000>;
> +		};
> +
> +		vreg_l18a: l18 {
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <1264000>;
> +		};
> +
> +		vreg_l19a: l19 {
> +			regulator-min-microvolt = <1648000>;
> +			regulator-max-microvolt = <2952000>;
> +		};
> +
> +		vreg_l20a: l20 {
> +			regulator-min-microvolt = <1648000>;
> +			regulator-max-microvolt = <2952000>;
> +		};
> +
> +		vreg_l21a: l21 {
> +			regulator-min-microvolt = <2600000>;
> +			regulator-max-microvolt = <2856000>;
> +		};
> +
> +		vreg_l22a: l22 {
> +			regulator-min-microvolt = <2944000>;
> +			regulator-max-microvolt = <3304000>;
> +		};
> +
> +		vreg_l23a: l23 {
> +			regulator-min-microvolt = <3000000>;
> +			regulator-max-microvolt = <3400000>;
> +		};
> +
> +		vreg_l24a: l24 {
> +			regulator-min-microvolt = <2944000>;
> +			regulator-max-microvolt = <3304000>;
> +		};
> +	};
> +};
> +
> +&hsusb_phy1 {
> +	status = "okay";
> +};
> +
> +
> +&sdc2_off_state {
> +	sd-cd {

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).

that's missing -pins suffix but most likely it does not match other DTS
neither. So probably was based on some old kernel.

> +		pins = "gpio98";
> +		bias-disable;
> +		drive-strength = <2>;
> +	};
> +};
> +
> +&sdc2_on_state {
> +	sd-cd {

Same problems.

> +		pins = "gpio98";
> +		bias-pull-up;
> +		drive-strength = <2>;
> +	};
> +};

Best regards,
Krzysztof