Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 14 Dec 2022 09:23:05 -0600
From:   Rob Herring <robh@kernel.org>
To:     Bernhard =?iso-8859-1?Q?Rosenkr=E4nzer?= <bero@baylibre.com>
Cc:     linux-mediatek@lists.infradead.org,
        linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org,
        devicetree@vger.kernel.org, krzysztof.kozlowski+dt@linaro.org,
        matthias.bgg@gmail.com, angelogioacchino.delregno@collabora.com,
        khilman@baylibre.com
Subject: Re: [PATCH v5 0/7] Add minimal MT8365 and MT8365-EVK support
Message-ID: <20221214152305.GA1080797-robh@kernel.org>
References: <20221213234346.2868828-1-bero@baylibre.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=iso-8859-1
Content-Disposition: inline
Content-Transfer-Encoding: 8bit
In-Reply-To: <20221213234346.2868828-1-bero@baylibre.com>
Precedence: bulk

On Wed, Dec 14, 2022 at 12:43:39AM +0100, Bernhard Rosenkr?nzer wrote:
> This adds minimal support for the MediaTek 8365 SOC and the EVK reference
> board, allowing the board to boot to initramfs with serial port I/O.
> 
> v5:
>   - Reorder top-level entries in mediatek,mt8365-pinctrl.yaml to match
>     example-schema
>   - Use consistent quotes
> 
> v4:
>   - Remove pins-are-numbered references that have been holding things up
>     now that the patches removing it from dt-bindings have landed in linux-next
> 
> v3:
>   - Remove a number of components that are not yet supported (they will
>     come back alongside the corresponding drivers)
>   - Address issues found by dt_binding_check (mostly fixing pinctrl
>     bindings)
>   - Address issues pointed out in comments
>   - Reorder patches
> 
> v2:
>   - Add missing dt-bindings documentation
>   - Small cleanups addressing issues in v1 pointed out by Krzysztof Kozlowski
> 
> Bernhard Rosenkr?nzer (4):
>   dt-bindings: arm64: dts: mediatek: Add mt8365-evk board
>   dt-bindings: irq: mtk, sysirq: add support for mt8365
>   dt-bindings: mfd: syscon: Add mt8365-syscfg
>   dt-bindings: pinctrl: add bindings for Mediatek MT8365 SoC
> 
> Fabien Parent (3):
>   dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
>   dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
>   arm64: dts: mediatek: Initial mt8365-evk support
> 
>  .../devicetree/bindings/arm/mediatek.yaml     |   4 +
>  .../interrupt-controller/mediatek,sysirq.txt  |   1 +
>  .../devicetree/bindings/mfd/syscon.yaml       |   1 +
>  .../pinctrl/mediatek,mt8365-pinctrl.yaml      | 197 ++++++++++
>  .../bindings/usb/mediatek,mtk-xhci.yaml       |   1 +
>  .../bindings/usb/mediatek,mtu3.yaml           |   1 +
>  arch/arm64/boot/dts/mediatek/Makefile         |   1 +
>  arch/arm64/boot/dts/mediatek/mt8365-evk.dts   | 163 +++++++++
>  arch/arm64/boot/dts/mediatek/mt8365.dtsi      | 343 ++++++++++++++++++
>  9 files changed, 712 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi

You've missed the subsystem maintainers on this series. gregkh/linux-usb 
for USB for example. They can pick up the individual patches.

Rob