Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20;
Date:   Wed, 14 Dec 2022 18:09:55 +0200
From:   Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To:     Hanna Hawa <hhhawa@amazon.com>
Cc:     jarkko.nikula@linux.intel.com, mika.westerberg@linux.intel.com,
        jsd@semihalf.com, linux-i2c@vger.kernel.org,
        linux-kernel@vger.kernel.org, dwmw@amazon.co.uk, benh@amazon.com,
        ronenk@amazon.com, talel@amazon.com, jonnyc@amazon.com,
        hanochu@amazon.com, farbere@amazon.com, itamark@amazon.com
Subject: Re: [PATCH v2 1/1] i2c: designware: set pinctrl recovery information
 from device pinctrl
Message-ID: <Y5n1U1lYbcbJ5U1k@smile.fi.intel.com>
References: <20221214142725.23881-1-hhhawa@amazon.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
In-Reply-To: <20221214142725.23881-1-hhhawa@amazon.com>
Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
Precedence: bulk

On Wed, Dec 14, 2022 at 02:27:25PM +0000, Hanna Hawa wrote:
> The current implementation of designware recovery mechanism fit for
> specific device (Intel / Altera Cyclone V SOC) which have two separated
> "wired" GPIOs to the i2c bus via the SOC FPGA for the i2c recovery.
> 
> Make pinctrl recovery information to points to the device pinctrl by
> setting the rinfo->pinctrl to dev->pins->p.

> Change Log v1->v2:
> - set the rinfo->pinctrl to dev->pins->p instead calling
>   devm_pinctrl_get().

Wrong place for a changelog...

> Signed-off-by: Hanna Hawa <hhhawa@amazon.com>
> ---

...should be located here.

...

> +	if (dev->dev->pins && dev->dev->pins->p)
> +		rinfo->pinctrl = dev->dev->pins->p;

Hmm... I don't see how this field is being used.
Can you elaborate?

-- 
With Best Regards,
Andy Shevchenko